CCTV Housings  (805)

Indoor, 16 outputs, 10 A (240 VA) capacity with circuit breakers

Indoor, 16 outputs, 10 A (240 VA) capacity

Indoor, 8 outputs, 5 A (120 VA) capacity

Indoor, 4 outputs, 2 A (48 VA) capacity

Outdoor, 4 outputs, 20 A (480 VA) capacity

 16-port, IEEE802.3at midspan * The “EU“ or “US“ suffix indicates a European or US power cord.

 8-port, IEEE802.3at midspan * The “EU“ or “US“ suffix indicates a European or US power cord.

 4-port, IEEE802.3at midspan * The “EU“ or “US“ suffix indicates a European or US power cord.

 High-power, single-port, IEEE802.3af injector * The “EU“ or “US“ suffix indicates a European or US power cord.

Sony SNC-UNI is an indoor/outdoor housing with clear window and hinged opening for Sony’s SNC-CH120/CH140/CH220/CH240, & CS50W cameras. It includes tamper resistant screws to lock down the housing top. Also a high-structure steel wall/pole mount bracket is included. It is designed for mounting to a flat wall or round pole, larger than 3.5-inches in diameter.

Camera Housings, Internal, 0 ~ 50, Vandal Resistant, 178 x 354.5 x 155 mm, 3500, 12 V DC

The AD1303 wedge ceiling housing is designed to accommodate most solid-state camera and lens combinations.  The fully enclosed, low profile design allows for inconspicuous camera placement and excellent protection, yet easy to install and service.

No power connection is required IP66- and NEMA 4X-rated against the ingress of dust and water, and IK10-rated for protection against impact and vandal acts The installer-friendly, low-weight plastic casing protects from corrosion All cables are protected inside the wall mount to enhance vandal protection and remove the risk of solar degradation A slot is dedicated for an optional intrusion alarm switch Comes with a wall mount and an integrated sun cap

The AXIS Pendant Dome protects Axis network cameras in outdoor environments as well as indoor conditions that may be humid, cold or dusty.  The housing provides IP66-class protection from dust and water ingress. With fan-assisted heating, the housing enables the camera to operate in temperatures down to -4? F (-20? C).  The following network cameras will fit in the AXIS Pendant Dome: AXIS 213 PTZ, AXIS 214 PTZ, AXIS 231D+, AXIS 232D+ and AXIS 233D.

Sony UNI-INS7C1 is an indoor pendant mount clear dome housing for SNC-RZ30N and SNC-RZ50N cameras. The housing features a 7 inch clear polycarbonate lower dome.

Protective housing for the AXIS 213 PTZ Network Camera, AXIS 214 PTZ Network Camera.

Panasonic WV-CS4SA is a smoked dome.

AXIS Indoor Recessed Enclosure is a drop-ceiling housing for indoor installation of Axis PTZ and PTZ dome cameras.

Panasonic WV-CW4SA is a smoked dome

Protects Axis fixed network camera in environments where temperature management is not a demand, such as subways or shopping malls No power connection is required IP66- and NEMA 4X-rated against the ingress of dust, rain, high-pressure water jets and damage from external ice formation Also IK10-rated for protection against impact and vandal acts The network cable is protected inside the wall mount to enhance vandal protection Comes with a wall mount with an internal cable channel and ball joint

Panasonic WV-CS5C is a clear dome cover

Panasonic WV-CW6SA is a smoked dome.

This unit is designed for use in elevators, stairwells, entrances, hallways, small offices, jail holding rooms, etc.  The housing permits maximum viewing coverage in confined areas for most low-profile cameras using wide angle lenses.  The exposed surface of the unit has a beige baked enamel finish.

Sony UNI-IFF7C3 is an indoor ceiling clear dome housing. The housing features a 7-inch thermoplastic polycarbonate dome to accommodate Sony's fixed type network and analogue cameras. The upper body is made of steel with a white powdercoat trim ring.

Sony UNI-ID7C3 is an indoor ceiling clear dome housing with a 7-inch optically transparent polycarbonate dome to accommodate Sony's ER/EP series, W series and RH/RS series PTZ cameras. The upper body is made of steel with a white powdercoat trim ring and an injection molded 3mm thick dome.

Sony UNI-ORS7T1 is an outdoor vandal resistant pendant housing.

Axis Communications AXIS T97A10 is a protective enclosure that allows Axis video network products to be installed outdoors and protected against the weather. The enclosure is suitable for the AXIS Q7401 video encoder, AXIS P8221 network I/O audio module and AXIS P7701 video decoder. The enclosure is designed for wall mounting, and for vandal-resistant protection, a metal wall mount box can be used. It can also be installed on a pole, using the wall mount box together with a pole mount plate.

The flat lens fixed camera housing provides with a value driven in-ceiling alternative to conventional camera mounting methods.  It provides a flat window option to the traditional bubble trim ring design.  The flat lens fixed camera housing has a plenum-rated back box which can be installed in a hard ceiling or standard 61x61 cm suspended ceiling.

Sony UNI-ONS7T1 is a outdoor pendant mount housing that features AC 24V input and integrated DC 12V for camera power.

Sony UNI-INS7T1 is an indoor pendant mount housing that features integrated DC12V for camera power.  

Protects Axis fixed network camera in adverse conditions An internal shell stores heat in cold environments, and fan ventilation transfers excess heat to the outer chassis for efficient cooling in hot environments Arctic Temperature Control ensures that the camera can start up even at -40 °C (-40 °F) following a power failure One-cable installation with Power over Ethernet or High Power over Ethernet connection IP66- and NEMA 4X-rated against the ingress of dust, rain, high pressure water jets and damage from external ice formation Also IK10-rated for protection against impact and vandal acts

Dome Housings, Internal/External, Wall mount, -20 ~ +50, IP65, with Heater, 325 x 326 x 213 mm, 2450

Designed to perfectly match AXIS M1124/M1125 Network Cameras Features IP66 protection rating against the ingress of dust and high pressure water jets from any direction as well as IK10 impact protection The housing is prepared for Power over Ethernet connection and comes with a ball joint wall mount bracket with an internal cable channel for tamper protection

The ADCH10 is a high quality environmental housing designed for most CCD cameras and zoom lenses.  The polycarbonate housing provides protection for the installed camera.  The 180-degree opening of the cover provides full and easy access to the camera and lens for trouble-free installation and servicing.  In cold weather climates, or where condensation problems exist, the optional low current heater and blower automatically regulate heat in the housing to maintain a clear viewing window.

Enables mounting of AXIS P39 Series network cameras outside of vehicles and rolling stock, such as buses, trams and emergency vehicles PVC-free, and made of impact-resistant polymer and aluminum base plate Compliant to IP66/IP67, IP6K9K, NEMA 250 Type 4X and IK09

Sony UNI-ORBC2 is an outdoor camera housing. This outdoor anti-vandal fixed camera housing provides rugged all-weather protection against wind, rain and extreme temperatures. The versatile housing is capable of accommodating wide-angle camera lenses up to 135° and a heavy duty cast aluminium feed-thru wall / pole mount with ¾ inch conduit input for simplified maintenance.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2, SNCA-HEATER.

Optional accessories: SNCA-CLEAR/2 (included) - SNCA-TINTED/2.

The AD1314 is a high quality environmental housing designed for most CCD cameras and zoom lenses.  The polycarbonate housing provides protection for the installed camera.  The 180-degree opening of the cover provides full and easy access to the camera and lens for trouble-free installation and servicing.  In cold weather climates, or where condensation problems exist, the optional low current heater and blower automatically regulate heat in the housing to maintain a clear viewing window.