CCTV Housings (574)

Clear bubble for exchange with the standard tinted bubble that is delivered with CFVB1415, CFVC1415, CFVS1415, CFVC1317, CFVS1317 indoor varifocal domes or replacement of the clear bubble that is delivered with CFFB1310, CFFB1315, CFFC1310, CFFC1315, CFFC1317 indoor fixed domes.
Add to Compare
The all-purpose protective aluminum camera housing with sun shield and integrated heating is of the Siemens design. All current Siemens cameras with Siemens fixed, vario or zoom lenses fit in this housing. The protective housing is suited for permanent mounting with the available wall arms or for direct mounting on a pan and tilt head. The housing cover is easy to remove, facilitating on-site installation and cabling of the camera with lens. Space is provided in the housing for installation of a twisted pair transmitter or fiber optic module. The power supplies for cameras and accessories can be installed in the back of the housing to save space.
Add to Compare
This weatherproof housing enables the outdoor installation of the CCDA1425/CCDA1435/CCDA145 speed domes. Including a heater and fan, the housing is weatherproof according to IP66. Incorporating a temperature management, the outdoor housing is designed for operation in temperatures ranging from -30 to +50 °C.
Add to Compare
A stylish general purpose camera housing with anti-reflective ABS polymer sunshield, plexiglass face-plate with polycarbonate front and rear. Supplied with in-built heater element and thermostat. The outer body of the housing is easily removed allowing in-situ adjustment of camera, lens and cabling.
Add to Compare
Suitable for indoor and outdoor mounting. Robust aluminium housing with attractive design. Two PG9 cable glands. Removable carriage for simple maintenance of camera in operating position. Integrated gutter at front of sunshield. Supplied, as standard, with a positive temperature coefficient heater element and thermostat. Various brackets are available to suit mounting requirements.
Add to Compare
Suitable for indoor and outdoor mounting. Robust aluminium housing with attractive design. Two PG9 cable glands and one PG11 glands. Removable carriage for simple maintenance of camera in operating position. Integrated gutter at front of sunshield. Supplied, as standard, with a positive temperature coefficient heater element and thermostat. Various brackets are available to suit mounting requirements.
Add to Compare
A general purpose aluminium camera housing complete with sunshield and glass face-plate. Ideal for cameras fitted with either fixed or varifocal length lenses. Suitable for static or pan-tilt mounting. The outer body of the housing is easily removed allowing in-situ adjustment of camera, lens and cabling. Supplied, as standard, with a positive temperature coefficient heater element and thermostat.
Add to Compare
Housing with glass face-plate. For cameras fitted with either fixed or varifocal length lenses. Suitable for static or pan-tilt mounting. 230V heater. Of epoxy powder-coat finish and off-white colour. Various brackets are available to suit mounting requirements.
Add to Compare
Hanwha Techwin SHD-B-3100FP is a Plenum rated in-ceiling housing for following models: • SCV-2080 • SCV-3080 • SCV-6081R • SNV-3082 • SNV-3120 • SNV-5080 • SNV-5080R • SNV-5084 • SNV-6084 • SNV-6084R • SNV-7082 • SNV-7080R • SNV-7084 • SNV-7084R
Add to Compare
Hanwha Techwin SHD-B-3100FP1 is a Plenum rated in-ceiling housing for following models: Group 1 - Shortest Screws: SCV-2080, SCV-3080, SNV-3082, SNV-3120, SNV-5080, SNV-5080R, SNV-7082, SNV-7080R Group 2 – Middle Screws: SCV-6081R, SNV-5084, SNV-5084R, SNV-6084, SNV-6084R, SNV-7084, SNV-7084R Group 3 – Tallest Screws: SND-5084, SND-5084R, SND-6084, SND-6084R, SND-7084, SND-7084R
Add to Compare
The Vanderbilt (formerly known as Siemens Security Products) "Phoenix Flameproof" equipment is ATEX certified to be used in potentially hazardous areas where there is a risk of explosion because flammable gases, vapours, mists or dusts may be present. Optional inbuilt telemetry receiver. 10 functions or 17 functions with presets. Tamper switch.
Add to Compare
Attractive extruded aluminium housings designed to enclose and protect modern CCD cameras fitted with either fixed or variable focal-length lenses. The outer body of the housing is easily removed by releasing just two allen-key screws to provide easy in-situ adjustment of camera, lens and all cabling. The removed housing body can be safely hung from a hook especially provided for this purpose. Two cable glands provide separate access for video and power. The closed design of the extruded housing-body is completed with cast-aluminium end-caps fitted with neoprene gaskets to ensure a weather-proof rating of IP66.
Add to Compare
Ease of installation has remained a priority for the ceiling mountable version, with a unique patented taper lock joint system which allows: Accurate positioning - of camera without the need to hold it in position prior to locking Locks securely - with a turn of a single allen bolt for quick installation The camera housing is easily mountable from a canopy or ceiling whilst maintaining full cable management and the ‘Slide and hang’ cover provides in-situ access for servicing requirements.
Add to Comparevictor video management system eliminates manual case management to save time
American Dynamics Management Solution
American Dynamics VideoEdge Network Video Recorder Software