CCTV Mounts  (1,238)

Made of stainless steel 1.4404 (316L) For pole diameters from 110 to 150 mm (4.3 to 5.9 in) Resistant to corrosion Sturdy and safe Compatible with ExCam XPT Q6055

Suitable for wide range of pole diameters Safe and easy to install IK10-rated vandal resistance NEMA 4X-rated corrosion protection Axis stainless steel straps included

Suitable for all Axis fixed dome cameras compatible with 1.5” NPS threaded Axis pendant kits Can be used in both indoor and outdoor environments Intended for poles with a diameter between 65–165 mm (2 1/2–6 1/2 in), and also for beams Features 3/4" conduit side entries for protected cable runs, and a closed back with cable gasket for protection against insect infestation Impact-resistant to prevent vandalism

An aluminium ceiling mount that includes AXIS T94A01D Pendant Kit (only used in combination with PTZ cameras) and AXIS T91A6 Pipe Seal Also compatible with Axis pendant kits with 1.5" NPS inner thread, and Axis ACI 3/4" conduit adapters The cables can be routed through the back, or from the side by using a conduit connection For indoor and outdoor use Vandal resistance with IK10

For outdoors and indoors Robust and safe installation Support for Axis PTZ domes and fixed domes with 1.5” NPS thread Flexible length, up to 5 m (197 in) with extension pipes Swivel action with a ±45° pivot angle

Outdoor-ready Lightweight, made of aluminum Robust, IK10-rated Easy to install Compatible with standard pan tilt pole mounted camera fixings

Flexible cable routing AXIS T91A6 Pipe Seal included Aluminum

Allows back-to-back installation of two Axis cameras for panoramic coverage Compatible with a wide range of Axis network cameras, including dome cameras, box cameras, and bullet cameras Can be easily mounted to diverse Axis mounting accessories with 1.5” NPS threaded interface, for mounting on walls, poles, and under ceilings IK10 rated for impact resistance, which safeguards it against vandalism Suitable for both indoor and outdoor use

Designed for fixed dome cameras Connect to power and data quickly and easily with the built-in RJ45 cable and connection Designed to be impact- and weather-resistant, it is suitable for all environments both indoors and outdoors

Can be used for both ceiling/soffit and column/parapet installations Allows Axis’ fixed camera housings to be mounted under hard surfaces such as ceilings, beams, soffits and canopies Can also be mounted on pole or column tops, parapets and other horizontal building structures Re-direction and maintenance of the camera is easy thanks to the swivel arm feature

Sony UNI-OSS7T1 is an outdoor vandal resistant surface mount that includes thermostatically controlled heater/blower.

Sony UNI-OSS7C1 is an outdoor surface mount enclosure that comes with thermostatically controlled heater/blower.

Specially designed for Axis fixed dome network cameras Neat design for both indoor and outdoor installations Compatible with all Axis fixed dome pendant kits with a 1.5” NPS thread and can also be installed on AXIS T94R01P Conduit Back Box to enable use of cable protection conduits

Specially designed using marine-grade, electropolished and coated stainless steel (SS 316L) material Offers high corrosion resistance against salt water and chemicals and it is ideal for stainless steel fixed dome cameras

Suitable for Axis positioning cameras and positioning units Marine-grade stainless steel (SUS316L) for use in harsh outdoor environments Suitable for marine, underground, and other high corrosion applications Impact-resistant to prevent vandalism (IK10) Cable gasket to prevent insect infestation

Highly robust wall mount Rotatable Flexible cable routing IK10 Rated Aluminium

Camera Mounts, Wall mount, 2.2 kg load, 270, 76 x 121 x 187 mm

Telescopic wall mount; expandable length.

Camera Mounts, Wall mount, 2.2 kg load, 220, 54 x 54 x 190 mm

The PM105 is a medium duty wall mount designed for mounting lightweight pan/tilts and is capable of handling loads up to 18.14 kg. The PM105 can be used with the PT270P, PT270-24P, and PT280-24P pan/tilts. The PM105 is easy to install and mounts to any wall or vertical surface.

Camera Mounts, Wall mount, 2.2 kg load, 260, 55 x 100 x 203 mm

Light duty wall mount with adjustable swivel head and cable feedthrough hole.

Designed to be compatible with a wide range of Axis cameras and camera stands Ideal for retail, banking, commercial and education environments Quick and instant grip to the tile grid No drilling or damages to ceiling tiles Easily reposition the camera when needed

Medium duty wall mount with manually adjustable swivel head.

Light duty camera wall mount with adjustable swivel head and cable feedthrough hole.

The PM14 is a light duty pan/tilt mount designed for wall mount applications. The PM14 is manufactured from aluminium and die-cast for low cost efficiency. The PM14 will support up to 9.07 kg. The mount can be used with PT270/PT280 series pan/tilt. The PM14 can also be adapted for pole mount applications when used with the PA101 mount adapter.

Universal wall mount for enclosures, pan/tilts

Wall mount for camera with manually adjustable swivel head.

Camera Mounts, Surface mount, 2.2 kg load, 440, 54 x 120 x 190 mm

Medium duty ceiling/pedestal mount with adjustable swivel head and cable feedthrough.

The WM3026 wall mount is designed specifically for use with Pelco's heavy-duty pan/tilts and/or enclosures. The WM3026 is capable of supporting a maximum load of 136.08 kg and can be safely mounted to any vertical load-bearing surface. The WM3026 includes an adjustable mounting head, built-in pan/tilt adapter and gusset for added support.

Robust, IK10-rated For indoor and outdoor use Versatile connection with IDC connector Built-in IP66-rated RJ45 connector 5-year warranty

Indoor and outdoor use Impact-resistant to prevent vandalism (IK10) Cable gasket to prevent insect infestation Robust and safe

Robust, IK10-rated For indoor and outdoor use Versatile connection with IDC connector Built-in IP66-rated RJ45 connector 5-year warranty

The WM2000 is a universal wall mount designed for use with medium and heavy-duty pan/tilts or enclosures. Constructed from aluminium, the WM2000 will safely support up to 34 kg. When used with the ST1 support strut, the maximum load is increased to 68 kg. Optional mount adapters are available for corner, pole and parapet applications. The WM2000 can be adapted for use with enclosures when used with the AH1000 or AH2000 adjustable head.

Allows a clean, pendant-style mounting of Axis mini fixed dome cameras Compatible with a wide range of Axis products Contemporary design, becomes one with the wall Concealed cabling and mounting screws Compartment for microphone and connectivity devices Mount on walls, counter tops, and ceilings Suitable for installations above shop fronts with Axis retail analytics, such as people counting and face recognition

Ceiling, pedestal, wall mount for camera with manually adjustable swivel head.

Outdoor recessed mount for AXIS Q60-E PTZ network cameras in roof overhangs/soffits Made of aluminium and stainless steel and supports both safety standards and the impact resistance of the camera Offers two 3/4" conduit holes for a plenum and/or rodent safe installation

AXIS F92A01 Height Strip Housing is used for inside-mounting of compatible sensor units. Designed to be placed near exits of buildings, the camera is positioned to look straight at a person’s face for more reliable identification, even when the person is wearing a hood or baseball cap. Suitable for retail, hotel, and banking environments where height strips are used to help eyewitnesses estimate the height of a fleeing person.

AXIS F92A01 Height Strip Housing is used for inside-mounting of compatible sensor units. Designed to be placed near exits of buildings, the camera is positioned to look straight at a person’s face for more reliable identification, even when the person is wearing a hood or baseball cap. Suitable for retail, hotel, and banking environments where height strips are used to help eyewitnesses estimate the height of a fleeing person.