CCTV Mounts  (354)

Dahua Technology DH-PFA131 is a junction box.

Dahua Technology DH-PFA141 is a power box.

Dahua Technology DH-PFA140 is a power box.

Dahua Technology DH-PFA130 is a power box with neat and integrated design.

Dahua Technology PFA13B is a water-proof aluminium junction box with neat & integrated design

Dahua Technology PFA13A is an aluminium junction box with neat & integrated design.

When the CCDA1415-DN is mounted using the I/O mounting base, it will support 4 alarm inputs and 4 alarm outputs. The Quick mount socket connects/disconnects the housing assembly in one step. The composite cables are connected to an I/O PC Board in the base, so the assembly is simply twist-locked onto the base. A round spring-finger connector on the board makes electrical contact with the housing assembly as it is connected.

Flush mount kit for Fixed dome cameras: Analogue: CFVC1317-LP, CFVS1317-LP, CVVC1317-LP, CVWC1325-LX, CVVS1317-LPIP: CFIS1425, CFMW1025 , CFMS2025, CVMS2025-IR

Vanderbilt (formerly known as Siemens Security Products) CVMA-MIP flush mount kit for Analogue and IP fixed dome cameras.

Aluminium pedestal mount for VCH200, VCH210 and VCH400 housings. Supplied complete with stainless steel fittings. 185mm height, 25 kg load rating, of epoxy powder-coat finish and off-white colour.

Vanderbilt CHBA0111 is an aluminium adapter to enable the CHBC2010 and CHBS2310 housing wall mount to be fitted to a corner. It is provided complete with stainless steel fixtures to attach the adapter to a corner and the mount to the adapter.

For securing a G25 and G50 SIRED illuminator to a horzontal surface or a pan and tilt drive.

For securing a S25 and S50 SIRED illuminator to a horzontal surface or a pan and tilt drive.

Dahua Technology DH-PFA114 is a hanging mount adapter.

Dahua Technology DH-PFA111 is a hanging mount adapter.

Dahua Technology DH-PFA110 is a hanging mount adapter.

Adjustable camera mount suitable for wall, ceiling or shelf mounting. Of epoxy powder-coat finish and off-white colour. Dimensions: 60 x 140mm. Model VCM900-190 has dimensions 60 x 190mm.

This pendant ceiling mount is a perfect solution for any wood‚ metal‚ plaster‚ drywall‚ or other hard ceiling installation. The mounting assembly includes a ceiling flange and a standard 1½" NTP threaded pipe. The assembly can be used in beam/pendant installations. This pendant ceiling mount is compatible with the weatherproof outdoor housing CCDA1425-WPH/-VRH.

Adjustable camera mount suitable for wall, ceiling or shelf mounting. Of epoxy powder-coat finish and off-white colour. Dimensions: 60 x 140mm. Model VCM900-190 has dimensions 60 x 190mm.

The CCDA-ODPM outdoor pendant mount allows an outdoor dome/housing to be suspended from an outdoor ceiling or horizontal surface. It can be installed using either 1-1/4 inch NPT threaded pipe or rigid conduit, either new or existing, up to 3 meters in length. The pendant mount is compatible with the CCDA-WPH outdoor housing. Powder coated aluminium, ABS plastic finish.

The integrated junction box provides perfect cable connectivity and servicing / maintenance capability. The “internal” cabling to the Dome camera is established via a system cable that is delivered together with the weatherproof housing. This pendant ceiling mount is compatible with the weatherproof outdoor housing CCDA1425-WPH.

The CCDA-IDPM indoor ceiling pendant mount is a perfect solution for wood, metal, plaster, drywall or other hard ceiling installation. This mounting assembly includes both a ceiling flange and a pendant base. The pendant base is attached to any standard 1-1/4 inch NTP threaded pipe or rigid conduit up to 3 meters in length. This assembly can be used in beam/pendant installations. The mount has powder coated, aluminium and ABS plastic finish and is compatible with CCDA1415-DN.

This wall mount attaches directly to a flat upright wall and includes a mounting flange with a standard 1½-inch NTP threaded pipe. This simple wall mount is compatible with the weatherproof outdoor housing CCDA1425-WPH.

Mounting block insulated for ECH-S/M/B, VCH200/210, VCH400. For installation of a protective housing on a horizontal or inclined surface, on a wall bracket or pole bracket.

Mounting block insulated for ECH-S/M/B, VCH200/210, VCH400. For installation of a protective housing on a horizontal or inclined surface, on a wall bracket or pole bracket.

Attractive silver-coloured camera mount, intended to compliment the new range of Siemens CCBC, CCBB and CCBS cameras of the same colour.

Medium duty steel adapter to enable the VCH900 housing wall mount and the VPT900 pan-tilt wall mount to be fitted to outside corners. 35 kg load rating, of epoxy powder-coat finish and off-white colour.

Medium duty aluminium ceiling mount with internal cable channel and integral housing swivel-tilt joint. For VCH200, VCH210 and VCH400 housings. Complete stainless steel fixings are supplied. 390mm ceiling drop and 25kg load rating. Of epoxy powder-coat finish and off-white colour.

Pole adapter for VCH900 (housing wall mount) and VPT900 (pan-tilt wall mount). 65~110mm pole diameter and 50kg load rating. Of epoxy powder-coat finish and off-white colour.

Heavy duty pole adapter for VPT910 wall mount. 80~150mm pole diameter, 50 kg load rating, of epoxy powder-coat finish and off-white colour.

Heavy duty steel corner adapter to enable the VPT910 pan-tilt wall mount to be fitted to outside corners. 50 kg load rating, of epoxy powder-coat finish and off-white colour.

Standard camera mounts in two versions, one with fixed length and one with adjustable length - colour grey.

Specifically designed for the installation of a camera to a ceiling - colour grey.

Standard camera mounts in two versions, one with fixed length and one with adjustable length - colour grey.

This indoor pendant mount adapter enables the usage of the pendant mount CCDA1425-PM together with the surface mount CCDA1425-SM to be used for indoor pendant mounting of CCDA1425/1435/1445 domes.

This indoor wall mount attaches directly to a flat upright wall. It is to be used together with the indoor surface mount CCDA1425-SM and CCDA1425/1435/1445 for indoor wall mount solutions.

This indoor‚ flush ceiling mount includes a clear bubble that will prevent the ingress of dust when CCDA1425/CCDA1435 speed domes are installed indoors. This flush mount housing enables CCDA1425/CCDA1435/CCDA1445 speed domes to be recessed into a hole cut into the ceiling.

20° Tilt Angle Wall Mount Adapter (Poly Carbonate), Accessory for 5MP Fisheye Cameras (SNF-8010, SNF-8010VM)

Hanwha Techwin SBP-B-100P is a single gang box converter plate that allows the camera to be installed onto a standard single gang box.

Hanwha Techwin SBP-301HM4 is a aluminium hanging mount small cap adapter.