FLIR Systems 313 Multispectral Fixed Camera for Early Fire Detection

Technical Specification

Features:

Make: FLIR Systems
Model code: 313
Series: FLIR FH-Series R
Colour Type: Colour / Monochrome
Resolution: 640 × 512 thermal resolution

Additional info:

The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.

Contact manufacturer Datasheet

Make	FLIR Systems
Category	Surveillance software products
Model code	313
Series	FLIR FH-Series R
	Colour Type: Colour / Monochrome Resolution: 640 × 512 thermal resolution Specialist Type: Thermal Sensitivity Lux: Color: 0.25 Lux (@ (f1.6 AGC On, 30 fps) / B/W: 0.10 Lux (@ (f1.6 AGC On, 30 fps) Focal Length mm: 25 mm Compression Type: Two independent channels of H.264/H.265 or M-JPEG (except 4K) for visible and thermal
Electrical Specifications	Voltage: 12 V DC / 24 V DC / 24 V AC Power Consumption: Nominal: 15 W / Heaters enabled, 12 VDC: 48 W / Heaters enabled, all other inputs: 70 W
Network Properties	Image Frame Rate: 30 fps Interface: 100/1000 Mbps Ethernet Network Protocols: IPV4, HTTP, HTTPS, UPnP, DNS, NTP, RTSP, TCP, UDP, ICMP, IGMP, DHCP, ARP, IEEE 802.1X
Environmental Specifications	Protection: IP66, IP67 Operating Temperature ^oC: -40 ~ +70 C (-40 ~ +158 F) Operating Humidity %: 0 ~ 95
Additional info	The FLIR FH-Series R are ruggedized, multispectral fixed cameras that integrate industry-leading thermal imaging with 4K visible imaging to provide rapid visual verification of hot spots in early fire detection applications. When a hot spot or temperature change is detected, the contactless temperature measurement is sent to the operator through a connected Video Management System (VMS) for instantaneous assessment and deployment of response tactics. Custom scheduling provides security personnel the flexibility to enable and disable alarms depending on business hours and seasonality. Combining the power of thermal hot-spot detection with intelligent vehicle detection, false alarms from hot exhaust pipes can be dramatically reduced.
Download PDF version