CCTV Housings  (805)

Small weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS. Front glass with self-cleaning and hydrophilic coating.

This is available to aid installation into a suspended ceiling.

Invisible infrared illuminator housing. 

Bosch MIC440SUNSHIELD is a sunshield for the MIC440 camera. It is a two-part molding designed to provide additional protection against direct solar radiation by reflecting solar exposure, and creating an insulating gap between the environment and the surface of the camera.

Weather-proof housing for suspended mount with self-regulating heater, integrated power connection board and additional safety thermostat.  Suitable for 230 VAC cameras or for low voltage powered cameras in combination with an additional inbuild mains unit.  Aluminium case including ceiling bracket, cable access via 3 x PG-9 cable glands (3rd gland applicable for remote control of cameras via RS-422 bus).

Large weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS.  Front glass with self-cleaning and hydrophilic coating.  Particularly large inner dimensions for mounting of motor-zoom lenses up to f = 240 mm.

Outer housings, made of aluminum with sunshield, heater and fan.Internal dimensions - 110 x 75 x 205 mm; the size of the viewing window 74x64mm, glass thickness 5mm. Convenient mechanism for opening / closing with secure lock. Beige colour.

Small weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS.  Front glass with self-cleaning and hydrophilic coating.  Inner dimensions for mounting of motor-zoom lenses up to f = 120 mm.

PIH-5064 is a cable managed housing featuring built-in auto activate heater & blower.

Small weather protection housing made of V4A steel with temperature-controlled front glass heating, internal fan and sun-protection for the high-speed pan/tilt head ARGUS. Front glass with self-cleaning and hydrophilic coating.

Low-impact acrylic clear bubble for AUTODOME HD in-ceiling cameras Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Easy installation IK10 rated for better protection Designed especially for use with the FLEXIDOME IP 3000i IR outdoor cameras

Low-impact acrylic tinted bubble for a pendant housing Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

Camera Housings, Internal, Ceiling mount, Dustproof, Aluminium, 300 mm, 2,400

Camera Housings, Internal, Wall, Ceiling mount, IP68, Stainless Steel, 168.3 (Dia) x 373 mm, 12 kg

Bosch VGA-BUBBLE-CCLR is a impact resistant polycarbonate clear rugged bubble for an in-ceiling housing.

Clear rugged IK10-rated nylon bubble qualified for use with AUTODOME 7000 HD cameras with pendant housings Provides both impact resistance and HD quality image resolution Offers maximum sensitivity by allowing as much light through as possible Protects camera from vandalism Designed to meet stringent strength standards without compromising optical clarity, the rugged bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 meters (10 ft)

Camera Housings, External, Wall mount, IP66, with Heater, Sunshield, 353 x 124.6 x 133 mm, 2,200, 12 ~ 30 V AC/DC

Anviz C1401 is an IP66 camera housing with water-proof coating film.

Low-impact acrylic clear bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Weather-proof housing with integrated wall-mount bracket, concealed cable access, sun-shield, self-regulating heater, integrated power connection board and additional safety thermostat.  Suitable for 230 VAC cameras or for low voltage powered cameras in combination with the optional mains unit NT/DC-1500. 

Bosch MICTHERSUNSHLD is a sunshield kit for MIC Thermal cameras. It is a two-part molding, designed to provide additional protection against direct solar radiation, particularly in sunny climates.

An impact resistant polycarbonate tinted rugged bubble for an in-ceiling housing The optical clarity is comparable to glass or acrylic, although the surface is much softer Offers covertness by making it difficult to see from the outside the direction the camera is facing Protects camera from vandalism Designed to meet stringent strength standards without compromising optical clarity, the rugged bubble can withstand impacts equivalent to a 4.5 kg (10 lb) weight dropped from a height of 3 meters (10 ft)

Low-impact acrylic clear bubble for a pendant housing Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Low-impact acrylic tinted bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

Low-impact acrylic large clear bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Also offers maximum sensitivity by allowing as much light through as possible

Low-impact acrylic tinted bubble for AUTODOME HD in-ceiling cameras Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

#005 key. Fits most Altronix enclosures Product Weight: 0.648159 Lbs. (0.294 kg). Shipping Weight: 0.998694 Lbs. (0.453 kg).

Low-impact acrylic large tinted bubble for an in-ceiling housing Offers enhanced image clarity for high-resolution images Offers covertness by making it difficult to see from the outside the direction the camera is facing

Camera Housings, Internal, Wall, Ceiling mount, Dustproof, Sunshield, Aluminium, 495 x 90 x 90 mm, 1.2 kg, 12 V DC, 24 V AC

black with clear window

Dome Housings, External, ABS plastic, 273 x 191 mm

white with clear window

The innovative 129AC Air Cooled camera housing perfectly fits the gap between very hot installations which require a liquid cooled camera housing and standard installations which don't need any cooling system. The enclosure is entirely manufactured in AISI316L stainless steel, making the 129AC the best solution in hot and harsh environments, where standard aluminium/plastic camera housings would be rapidly damaged by heat and corrosive agents, especially in industrial indoor installations. The 129AC is equipped with: a Vortex cooling tube installed on the back (which blows cold air inside the housing) three exhausting check valves installed on the front cover an air nozzle to cool down and, at the same time, keep clean the glass from dirt and dust. The Vortex tube output can be adjusted according the needs: an higher flow with less cool air or a lower flow with cooler air. The Tecnovideo ABFL-01 Air Filtering Battery is recommended to grant clean air to the front window as well as to the Vortex tube, filtering water and oil particles. Different models are available: 360 mm and 460 mm length, with 70 mm usable diameter front window, both for visible light cameras (Borosilicate window) and thermal imagining cameras (Germanium window). A full range of mounting accessories is available to meet every installation need (wall mount bracket, pole mount adaptor, corner mount adaptor). For more information, please visit the product page on Tecnovideo website: www.tecnovideocctv.com/air_cooled_camera_housing_129_ac.php.

Camera Housings, External, Wall mount, Weather Resistant, with Heater, Sunshield, Aluminium, 125 x 133 x 473 mm, 2.9 kg, 230 V AC

SAS725B is a CCTV camera housing made of ABS and is used with SCR510, SCR515, SCR520, SAH725 and SLI070.

Aluminium case with V2A stainless-steel screws. 3 x cable glands. Temperature regulation via PTC heating element and additional safety thermostat. Isolated camera mounting to avoid ground-loops.

Aluminium case with V2A stainless-steel screws. 3 x cable glands. Temperature regulation via PTC heating element and additional safety thermostat. Isolated camera mounting to avoid ground-loops.

pole mount, clamp fixing

Camera Housings, External, Wall, Ceiling mount, IP65, with Heater, Sunshield, Zintec Sheet, Aluminium, 4500, 9 W, 110 ~ 230 V AC