CCTV Housings  (805)

Parabit HO 605IR is a CCTV camera housing.

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables. Available with a sunshield (CHN-350M).

The Dennard 515, 516, 517 range of environmental camera housings are designed to accommodate a wide range of camera /lens combinations and to provide protection to BS.EN 60529 Level IP 65 (no water ingress).

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables. Available with a sunshield (CHN-450M).

Verint VPOE-1 weather resistant housing specifically designed for Verint box cameras. Developed for both indoor and outdoor environments, the VPOE-1 enclosure offers a wide variety of features including a built-in heater and blower to keep a camera operational and performing its best in severe weather conditions.

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables. Available with a sunshield (CHN-450M).

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables.  Available with a sunshield (CHM-200M).

Camera Housings, External, Wall, Ceiling mount, -20 ~ +50, IP68, Stainless Steel, 168.3 (Dia) x 342 mm, 9 kg, 100 ~ 240 V AC

Outdoor housing for Fastrax I - III dome cameras Tinted bubble 6.5" (165mm) Prepared for wall and ceiling mounting Sunshield, heater and blower kit included Supply voltage: 24VAC/50-60Hz Protection rating: IP66 Option: Wall and ceiling mount brackets, power box Option: Connection cable #74143 & #74144

Sunshield for CHM-200 camera housings.  307 mm length.

Camera Housings, External, Wall mount, -20 ~+50, IP54, with Heater, with Wiper, Sunshield, Aluminium, 445 x 121 x 80 mm, 4,000, PoE

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables. Available with a sunshield (CHN-250M).

Sunshield for CHM-250 camera housings.  357 mm length.

Camera Housings, External, Wall mount, -20 ~ +50, Weather Resistant, with Heater, with Wiper, Sunshield, Aluminium, 252 x 85 x 75 mm, 2.4 kg, 12 ~ 24 V

With reinforced thermoplastic end caps, available in 3 lengths.  Can be supplied with integral and optional heater / demisters, power supplies and transmitters to send video signals over twisted pair or fibre cables. Available with a sunshield (CHN-350M).

The Dedicated Micros DM/2015-606 camera housing provides installers with a quick and secure option for fixed and zoom cameras. The optional wiper module adds increased functionality to meet the demands of a high specification installation.

Sunshield for CHM-300 camera housings.  407 mm length.

Dome Housings, Internal, Vandal Resistant

Dome Housings, Internal, Vandal Resistant

Bosch EXPB-3-W-KIT is a wall-mount kit includinh camera housing for IR illuminators. It is designed for rugged outdoor applications. The thick cast aluminum construction is extremely durable and tough. It is compatible with AEGIS UFLED and AEGIS SuperLED Illuminators.

Camera Housings, Internal/External, IP65, Aluminium alloy, 5,600, 12 W, 12 ~ 24 V AC/DC or 100 ~ 230 VAC

Camera Housings, External, Wall mount, -20 ~ +50, IP66, Vandal Resistant, Sunshield, 128 x 66 x 220 mm, 2,100, 40 mA, 230 V AC

The 508 housing is a weatherproof, fixed attitude, vandal resistant enclosure, designed to accommodate a wide range of cameras.

Universal mounting bracket fits most brands of camera mounts. Provision to lock housing. Beige colour.

IK-H6 is a innovative weatherproof housing for indoor/outdoor installations of ICD-501, Super Cube DVSP colour camera. It is small, good-looking, strong and light as well. This model may be ideal to be installed in every environment including tropical ones.

The DM2010 and DM2015 are designed to provide the installer with a quick, secure and reliable camera option for fixed and zoom cameras. Both housings are designed to operate for either 12VDC to 24VAC or 110VAC to 230VAC.

Liquid cooled camera housings are required for installations in very hot environments. When it comes to stand with very high temperatures and severe ambient conditions, like in hot industrial plants, Tecnovideo LC (Liquid Cooled) series camera housings are the most suitable solution. The housing main body is made up by two stainless steel tubes closed at their ends, forming a special chamber that allows the water or any other liquid to flow and cool down the housing. The front flange is designed to allow compressed air to be distributed all around the window to cool it down and keep it clean from dirty and dust. It's an essential protection when the housing is located in foundries, near oven or dusty and dirty hot places. The compressed air can be filtered using the ABFL-01 filtering battery, available as optional. Tecnovideo LC series comprises 129LC, for small-medium size cameras/lenses, and 168LC series for medium-large cameras/lenses, both completely constructed in AISI316L stainless steel. Both series are available for visible and for IR thermal imaging cameras. Borosilicate glass (Borofloat) front windows, with high chemical resistance and low thermal expansion, are the best solution for visible light cameras. Germanium window, with special diamond like coating (DLC), recommended for environmental temperature not higher than 100° C, and Zinc Selenide window for higher temperatures, are both available for applications using IR thermal imaging cameras. Upon request are available sapphire windows for MWIR (mid-wavelength infrared) range (3 - 5 μm). For further information, please visit the LC Series page.

Parabit HO 605S is a CCTV camera housing.

Parabit HO 605SS is a CCTV camera housing.

The LTC 9480/00 Housing is smartly styled for indoor use.  This housing meets customers' demands for attractive housings that are both cost competitive and easy to install.  They fit a wide range of 1/4-inch, 1/3-inch and 1/2-inch format CCD cameras and lenses.

IK-SP101 is innovative In-ceiling high-hat housing for indoor installations for Ikegami CCTV camera series ICD-34, ICD-47, ICD-501, ICD-808, ICD-828, ICD-848. It is small, strong and light at well. Horizontal angle of view is 360 degrees and vertical inclination is 115~245 degrees. Also available with smoked glass.

The OD-1000B is designed to be bottom mounted. The unique internal camera bracket can be placed at the top or bottom of the housing to accommodate all styles of cameras.

MobileView MSS-3010-00-04 is a cast aluminium housing for surface mount cameras.

The 101 series Stainless Steel Camera housing has been designed to protect small and medium size cameras installed in highly aggressive environments.

VPOE-2 is a weatherised camera housing featuring blower and heater.

Camera Housings, Internal/External, Wall mount, Weather Resistant, with Heater, Aluminium, 252 x 85 x 75 mm, 2.4 kg, 40 W, 230 V AC

The EXPB-3W is a heavy-duty IR illuminator wall mount bracket kit complete with camera housing. It is designed for rugged outdoor applications. The thick cast aluminum construction is extremely durable and tough. Its versatile design means that it is compatible with AEGIS UFLED and AEGIS SuperLED Illuminators.

The Dennard 515, 516, 517 range of environmental camera housings are designed to accommodate a wide range of camera /lens combinations and to provide protection to BS.EN 60529 Level IP 65 (no water ingress).

Dome Housings, Internal, Wall, Ceiling mount, -45 ~ +50, IP66, with Heater, Aluminium, 2,800, 75 W, 24 V AC

Dome Housings, Internal, Wall, Ceiling mount, -45 ~ +50, IP66, with Heater, Aluminium, 2,800, 75 W, 24 V AC