CCTV Mounts  (354)

Light-duty ceiling mount Die-cast aluminum construction Maximum load is 19.8 lb (9.0 kg) Inlet Dimension: PF 1-1/2 in. Weight: 2.65 lb (1.2 kg) Application SN680D, SN683D and SN240D Domes

Wall-mount adapter for indoor and outdoor camera domes. Die-cast aluminum construction with polyester powder-coat finish.

Vicon IQM-WM3 CCTV mount allows indoor or outdoor installation on a wall surface with the dome oriented toward the ground.

Vicon IQA-CNR CCTV mount allows indoor or outdoor installation on an inward facing corner, outward facing corner or pole.

Vicon V20BSS is a pole camera mount that accommodates its medium- and heavy-duty wall mounts for outdoor installations. It has an attached wall mount that can support a complete camera system, including pan-and-tilt drive,camera housing and camera, up to a load limit of the particular mount being used. It is constructed of aluminum or stainless steel, and provides sturdy installation that is capable of withstanding extreme weather conditions.

Vicon V20BSS-A  is a pole camera mount that accommodates its medium- and heavy-duty wall mounts for outdoor installations. It has an attached wall mount that can support a complete camera system, including pan-and-tilt drive,camera housing and camera, up to a load limit of the particular mount being used. It is constructed of aluminum or stainless steel, and provides sturdy installation that is capable of withstanding extreme weather conditions.

Vicon V660-HCS300 is a in-ceiling mounting kit for PTZ cameras. It is made of steel and injection-molded plastic.

Vicon IQM-PND pendant mount allows indoor or outdoor installation on a ceiling surface with the dome oriented toward the ground.

Vicon IQA-FG flush mount allows indoor mounting on a drop ceiling or sheetrock ceiling surface.

Camera Mounts, Wall mount, 59 kg load, Steel, 700

V660-HDA202 is a NPT pipe adapter that converts outdoor domes to pendant mounting.

Camera Mounts, Wall mount, 91 kg load, Steel, 600

V660-HDB242 is a pendant arm wall/ceiling mount

In-ceiling mounting kit for outdoor camera domes For flush mounting in a drop ceiling Steel and injection-molded plastic Maximum load is 1.3 lb (0.6 kg) Diameter: 8.7” (220 mm) Height: 5.55” (141 mm) Weight: 1.1 lb (0.5 kg)

Models V24WM and V36WM Heavy-Duty Wall Mounts are designed to support pan-and tilt drives, scanners, camera/lens combinations, and environmental housings with total camera station load ratings of up to 200 pounds (91 kg) for the V24WM and 130 pounds (59 kg) for the v36WM.

Used with V660-HVPWCB2

Designed specifically for Vicon monitors VM614-3, VM615-5 and VM621-5.

V660-HCS256 is an in-ceiling mounting kit for Cruiser PTZ cameras

V661V and V662V-Series Vandal-Proof Outdoor Domes. Cruiser S660V and SN660V PTZ cameras.

In-ceiling mounting kit for outdoor camera domes. Steel and injection-molded plastic.

Vicon’s Adjustable Mounting Heads allow a wide range of positioning angles for mounting closed-circuit television cameras and camera housings.  These heads accommodate light, medium, and heavy camera/ combinations and are intended for use with vicon mounts.

Vicon's Adjustable Mounting Heads allow a wide range of positioning angles for mounting closed-circuit television cameras and camera housings.  These heads accommodate light, medium, and heavy camera/ housing combinations and are intended for use with vicon mounts.

Designed specifically for Vicon monitors VM614-3, VM615-5 and VM621-5.

Camera Mounts, Wall mount, 91 kg load, Steel, Fixed, 3900

V660-HCM150 is a corner mount adapter used with V660-HVPWCB2.

Light duty ceiling mount.  Specially designed to conceal cables by routing them through the mount.

This designer model wall mount accepts a variety of pan-and-tilt drives and scanners and an optional head that allows 360-degree rotation and ±60-degree tilt.

The V1100AWM Wall Mount is a light-duty mount.  It is constructed of high-impact plastic, is light gray in color, and is designed to support camera/housing combinations weighing individual locking knobs for horizontal and vertical movement and can be set for any normal camera angle.

Model V24WM Heavy-Duty Wall Mount Series is designed to support pan-and-tilt drives, scanners, camera/lens combinations, and environmental housings with a total camera station load rating of up to 200 pounds (91 kg).

Light-duty mount.

Universal light-duty indoor mount.

MD-CMT is a CCTv camera mount Compatible with MegaDome® Series

Easy installation and superior design Heavy duty enclosure protection for applications in harsh environments Die-Cast Aluminum is resistant to impact and salt damage

The D4S-CMT-B is a high quality pendant mount accessory designed for the D4S Indoor 4” Dome Camera Series.

The D4S-WMT-B is a high quality wall mount accessory designed for the D4S Indoor 4” Dome Camera Series. Combining the D4S-WMT wall mount with the superior imaging of a D4S Series Camera provides the perfect solution for environments in which cameras need to be less noticeable, or require additional protection.

Vicon V960D-WCA1 is a dome mount that includes threaded nipple and allows camera domes to mount to Surveyor mounts.

Heavy-duty indoor/outdoor mount, specially designed to support the pressurised housing version of the SurveyorVFT camera dome.  Load rating sufficient to support pressurised dome system. 

18 kg kg load, Aluminium, 1220 x 843 mm

Used for ceiling mounting of VM61514-5-MM and VM621-5-MM monitor mounts.

The V814AWM is a light-duty adjustable wall mount constructed of painted cast aluminum.  It is suitable for indoor or outdoor installations.  The mounting flange is attached to the wall using three No. 8 screws.  The camera is attached to the mount using the three available holes on the adjustable head.