CCTV Telemetry Receivers  (140)

DC type, 12 V DC, 4, 0 ~ 95, RX, 10/100 BaseT Ethernet, 60, 166 x 147 x 42, 703, 0 ~ 50, 6 W

Vicon VAX-LRR4 is a long range receiver based upon proven contactless digital ultra high frequency (UHF) technology, the VAX Receivers interface with the Vicon VAX access control systems by complying with the Wiegand communication protocol. It offer value-add features such as MAXSecure™ and up to 200 feet of read range (VAX-LRR4). Additionally, VAX Transmitters are active devices, powered by the most reliable and common battery, and equipped with a potted proximity or contactless smartcard module. The module supports VAX proximity reader technology and allows the Transmitter to be used as a close-range credential.

The Vicon VAX-LRR2 long range receiver sets the electronic security benchmark for high frequency, long-range identification Receivers. Based upon proven contactless digital ultra high frequency (UHF) technology, the VAX receiver interfaces with the VAX access control system by complying with the Wiegand communication protocol.

Power Consumption - 10W. RS232, Current Loop and RS485 selectable communication.

The DTMRX2 is a digital receiver, controlled by a microprocessor, for remote control of a pan & tilt motor and a motor-driven zoom lens.

SNCAZX104 is a 4 channel hybrid camera receiver.

Sony SNCA-ZX104 is a 4-channel hybrid camera receiver that allows to seamlessly integrate images from four different hybrid cameras, enabling their easy and cost-effective migration towards HD IP video surveillance systems. It offers 4 x BNC camera input and 4 x BNC analogue video output.

Sony eBridge 16CR is a 16 channel ethernet over coax rack mount receiver. It enables fast 10/100Base-T Ethernet digital communication to be transmitted over coax cable. The unit is designed to be used with eBridge1CT transceivers. This plug and play unit facilitates system upgrades from analogue to IP cameras/devices utilising existing legacy Coax and eliminating the costs and labour associated with installing new network cabling

DSC SG-DRL3-IP is a network line card for SYSTEM III that features patented caller ID and Automatic handshake selection and supports two-way audio via hook flash only.

Single telephone line compatible with the SG-System III Supports bridge mode for two-way audio pass-through Up to 64 profiles Patented Caller ID and Automatic handshake selection (AHS) Hot swappable 8 different handshakes per profile Pulse, Contact ID, Super fast, SIA, Bosch Modem

Sony eBridge 1CR IP over Coax receiver is designed for use with eBridge1CT to enable fast 10/100Base-T Ethernet digital communication over coax cable. This plug and play unit facilitates system upgrades from analogue to IP cameras/devices utilising existing legacy Coax and eliminating the costs and labour associated with installing new network cabling.

Each line card supports up to 1,536 supervised and up to 9216 accounts totals Works over local LAN/WAN network as well as the Internet 128-bit AES encryption Polling and hardware substitution protection for the transmitters Compatible with 10/100BaseT networks UL standard & encrypted line security

Dual telephone line compatible with the SG-System III Supports two-way audio via hook flash only Up to 64 profiles Patented Caller ID and Automatic handshake selection Hot swappable 8 different handshakes per profile Pulse, Contact ID, Super fast, SIA, Bosch Modem

Dual telephone line compatible with the SG-System IV Supports two-way audio via hook flash only Up to 64 profiles Patented Caller ID and Automatic handshake selection Hot swappable 8 different handshake per profile Pulse, Contact ID, Super fast, SIA, Bosch Modem

DSC SG-SII-RMK is a rack mount kit for SG-SYSTEM I-IP or SG-SYSTEM-II to mount in any standard 19" rack.

to match PTZ functions to Std 24v Telemetry Rx

BBV RX24VAC is a output module for receiver.

Meyertech ZVR-210-PSU is part of ZVR-210 telemetry receiver which operates over twisted pair and features 11 functions.

2 on-board form ‘C’ relay outputs Supports up to 6 wireless buttons per output 4 programmable relay options (Momentary, Timed, Latched and Continuous) Independent of security system type No serial number to program 120 VAC plug-in transformer included Reliable 433 MHz technology Compatible with WS4949, WS4939, WS4959 and WS4969 wireless keys

Meyertech ZVR-530-PSU is a 24 V AC, 96 VA transformer for telemetry receiver.

Meyertech ZVR-410-PSU is part of ZVR-410 telemetry receiver which operates over twisted pair and features 11 functions.

The RS232/RS422 converter kit turns RS232 to RS422, and RS422 to RS232 full duplex.  It can be used to interface a PC based DVR with the CTI/8 or CTI/16.

16, 4

Communicates in all major ITI formats, all common pulse formats, 4/1, 4/2, 4/3 and DTMF format, FBI Super Fast format, RADIONICS Modem II, Modem IIE, Modem IIa, BFSK formats, SK FSK1, FSK2 formats, WESTEC Format 6, Varitech.  Each line equipped with non-volatile memory which stores last 256 alarms received and telephone numbers corresponding to each alarm.  Uses 16-bit microcontroller for the CPM2 and 8-bit microcontrollers for each line card.  Equpped with 12V rechargeable stand-by battery.  1 parallel printer port.  2 serial RS232 ports.  2 way audio.

The 98005 is a bi-directional converter used to convert 20mA to RS232, and vice versa.   This product is simple to use and easy to install.

BBV RX100/DENNARD is an interface receiver.

Value-priced remote monitoring solution ideal for lower-volume applications Supports up to 512 supervised and up to 1,536 IP communicator accounts (all DSC communicators) Rack mount in standard 19-inch rack with the SG-SII-RMK TCP/IP, USB, serial outputs to automation software 128-bit AES encryption Works over local LAN/WAN network as well as the Internet Polling and hardware substitution protection

The type drx400d.c. receiver is a d.c. unit with up to 16 programmable presets depending on transmitter, with 2 patrol modes and 12 V d.c./230 V a.c. camera outputs.

DSC MLR-2000 coax-twisted pair receiver has ability for dual hot redundant, hot switching controllers. It features dual power supplies per rack. There is two-line 20 character display and keypad on front panel. It is expandable to up to 255 individual line cards which is connected to a dual redundant central server and protocol converted (CPM-2000). It also features two-way audio. The STD IO provides debug messages to logging software.

The NX-548E receiver adds wireless capabilities to the NetworX line of control panels. Adding a receiver makes these control panels compatible with NX wireless transmitters. Only three wire connections are required for power and communication to the control panel.

The C-AMPAC Alarm Card provides many new features, including the ability to work in both serial and UTC systems. Each alarm card has two RS-485 serial ports with 8 opto-isolated alarm contact monitor inputs.

The CTI Coax Interfaces are a range of innovative products designed to provide conversion from RS422/485 data to BBV up the coax.

Dedicated Micros (Dennard) drx400-II telemetry receiver is similar to the drx 300 but has 16 presets simply set up from the control unit and 4 auxiliary outputs.

The type drx300 receiver controls pan, tilt and lens functions with a single selectable auxiliary output.

The RX55X is designed to control 24V dc high and variable speed pan & tilt heads via BBV and Baxall up-the-coax and a range of RS485/422 telemetry protocols.

eneo EKR-PTZFI-R1 RS-232/RS-485 is a telemetry preset receiver.

2 digital lines.  Includes card age, DRL2A module with 2 6-pin modular cables, CPM2 module.

AC type, 230 V AC, 1, 1, IP67, 8, RX, NTSC, PAL, RS-485, 380 x 190 x 130, 2,000, -10 ~ +40

The TX1500/AL16 provides 16 individual normally closed volt free alarm inputs and two changeover outputs.  The card communicates via the BBUS with the monitor output card.  Power is supplied either via the BBUS interface when the alarm card is mounted in the TX1500 subrack or via an external 9V dc supply when mounted remotely.

Single image display. single channel.Manual/PC control.