CCTV Transmitters & Controllers  (295)

Desktop keyboard for use with CM6700 series, variable speed PTZ functions.

Remote keyboard wiring kit c/w RJ45 junction box and 230v:12vAC transformer, allows keyboard to be mounted up to 100m distant.

Pelco KBDKIT-X is a keyboard extension kit for remote operation.

Vicon VAX-LRT2 is a long-range transmitter that set the electronic security benchmark for high frequency, long-range identification transmitters. Based upon proven contactless digital ultra high frequency (UHF) technology, the receivers interface with the Vicon VAX access control system by complying with the Wiegand communication protocol.

Multifunction operator keyboard with back light graphical display (240 x 64 pixel).  Stainless-steel keypad with soft keys, remote control driver output, 6 x user programmable function buttons and operator joystick with integrated zoom function.  To be connected via RS-232, RS-422 or integrated LAN port for flexible access to the management system GeViControl.  Fully integrated into the GEUTEBRÜCK videomanagement software GeViSoft.

The UltraKey represents an entirely new approach to intelligent, user-friendly control of CCTV Management Systems. Designed to take full advantage of the powerful features of Ultrak's MAX-1000 Video Management System, the Ultrakey incorporates a large touch screen LCD. Dedicated hard keys are provided for common selections like alternate camera selection, PTX call, sequence selection, tours, multiplexer selection and control, recorder selection, function, review, print, dub, alarm acknowledge and VCR control functions.

2 monitor output expansion card

With the VMC-1 "Eagle", Dallmeier is set to revolutionise the market for video management hardware.  In close cooperation with experienced users from the security industry and as a result of practice-oriented product research, a top-class Video Management Centre has been developed which by far surpasses the performance of standard, industrially-manufactured keyboards.The Video Management Centre "Eagle" is modular in its structure and thus highly flexible.  The individual components, whether it‘s the keypad, the joystick or the jog-shuttle, may be positioned according to individual preferences and are therefore equally well-suited for both left- and right-handed operators.  Moreover, it is also possible to use the individual components as freely programmable stand-alone devices.The positioning of the control keys directly around the joystick or the jog-shuttle is particularly user-friendly as the groups of keys almost automatically guide the fingers through the operations.  Many of the control keys are freely allocable, allowing the operator to suit the VMC-1 to his or her individual mode of operation.Features:Flexible positioning of the modules (suited for right- and left-handed operators)Individual modules can be used as stand-alone devices6" TFT monitor for picture display3 axis joystickPlain, low-maintenance surfaceErgonomic operation thanks to intelligent designVersatile uses possible due to its unique, high-quality style

Receiver Sensitivity (IEEE): 802.11n: -73dBm @ HT20, -70dBm @ HT40, IEEE 802.11g: -76dBm @ 54Mbps, IEEE 802.11b: -92dBm @ 11Mbps N connector for direct mobile DVR transmission Optional USB 802.11 b/g/n adaptor Data Rates: IEEE 802.11g 54Mbps,IEEE 802.11b 11Mbps, IEEE 802.11n 150Mbps Roof-mount ready

The new exacqVision surveillance keyboard, with firmware designed specifically for exacqVision VMS, allows fast camera finding and navigation, enables easy video wall control, and PTZ control. The durable, 3-axes Hall-effect Joystick provides intuitive control for pan, tilt and zoom camera functions; the 10-button numeric keypad is ideal for camera selection and touring functions; the 16 user defined buttons map directly into common exacqVision VMS commands, such as focus near/far, iris open/close, jump to presets, find cameras; and the left/right arrow wheel maps directly into left and right movements.

Honeywell's UltraKey Lite® keyboard is an industry-leading design for reliable, user-friendly control of video management systems. It works on both the MAXPRO-Net and VideoBloX Matrix controllers to provide a uniform user interface regardless of system controller.

on-screen set-up, TDG, fully configurable, password protection, RS232/PC control, supports up to 8 keyboards, configurable alarms, rack/shelf mount, 240v.

March Networks supplies the industry-leading Garmin GPS 16 receiver, featuring an integrated antenna and rugged, waterproof design ideal for mobile applications. The 12-channel receiver continuously tracks satellites and reports precise vehicle positioning and speed. Location can typically be determined within three meters, even without an external differential GPS beacon receiver. Features: High-performance GPS module and antenna Accurate location, speed and time data Direct connection to mobile NVRs Roof-mount ready

on-screen set-up, TDG, fully configurable, password protection, RS232/PC control, supports up to 8 keyboards, configurable alarms, rack/shelf mount, 240v.

The VMC Joystick is a stand-alone USB input device for systems running on Microsoft Windows operating systems. Once connected, it is installed automatically using the standard driver that is integrated in the operating system and enables the control of any number of applications. In connection with a Dallmeier PVS 7 and the Dallmeier software PView 7 or SeMSy® it allows for the remote control and display of up to 24 cameras per recorder.

128 channels, 0 ~ 95, 10.8 ~ 13.2 V DC, 12 W, -10 ~ +55, 408 x 215 x 105, 3,200

IP over Coax Converter (Transmitter + Receiver) Supports IEEE802.3, IEEE802.3u and IEEE802.3X standards Port: 1xRJ45 10/100Mbps, 1xBNC Supports IEEE802.3af and IEEE802.3at power supply standards Supports MDI/MDIX self-adaption Supports RG59 coaxial cable: 1312ft/400m/100Mbps, 3281ft/1000m/10Mbps Supports long range power supply transmission via coaxial cable

AXIS T8310 video surveillance control board is a modular system with a separate joystick, keypad and jog dial unit. The modular system allows the user to choose a simple solution such as only the joystick, or a complete solution with all three modules for both camera and video management.

Video System Controller keyboard for the remote control and display of up to 24 cameras.  LCD display.  Ergonomic design; compact configuration.  Serial interfaces RS422 and RS485.  Control of up to 24 PTZ cameras.  Programmable PTZ tours.  3 axis joystick.  Low-maintenance rubber keyboard.  Power supply with power pack or battery. 

Continuous green LED indicates system recording status LED off indicates camera obstruction or system fault Tag/alarm button marks video segment for download

Left and right turning, hard braking, aggressive driving and impact sensor Direct alarm input to mobile NVR Alarm tags video segment upon incident

20Hz – 20kHz frequency range Impedance 75Ω balanced Two microphone inputs per mobile DVR Ceiling or wall mount

Allows cost-efficient multi-channel migration from analogue to IP video surveillance systems using existing coax cabling Supports Axis network video products High channel density and fits Axis video encoder chassis

The UltraKey Plus keyboard represents an industry-leading approach to intelligent, user-friendly control of video management systems. Selection and control of any function within the video management system is available directly from the keyboard. Designed to take full advantage of the powerful features of Honeywell's video matrix and management systems, UltraKey Plus incorporates a large backlit colour touch screen LCD that can easily be configured with hundreds of menus and accessed dynamically using both hard key and soft key selections.

Axis Communications AXIS T8311 is a 3-axis joystick with a turn knob and six application defined hotkeys. It gives responsive and accurate control of all Axis PTZ and PTZ dome network cameras. It is designed for both left hand and right hand use. The video surveillance joystick is easy-to-install with USB interface.

Dome controller, compatible with all Speed Dome Optima and Ultra Series domes.

The 9770 System is a full-featured video matrix switching control system that allows users to view and control up to 2,048 cameras and 512 monitors on a single node.  Expanded monitor capacity in the matrix bay allows implementation of larger systems with a smaller footprint (less hardware) than other matrix systems.  The base configuration for the 9770 System is made up of a central processing unit (CC1), matrix switching bay(s) (MXBs) with video input/output modules, and keyboard controllers (KBDs).  Optional components can be added to enhance system capabilities.  The 9770 System also includes built-in video loss detection and system diagnostic features, indicated by LEDs on the front panel of the matrix bay.  Optional DVR/VCR management allows DVRs and VCRs to be controlled directly from the system keyboards.

AXIS T8640 enables camera installers to keep the legacy coax cabling when converting an analogue system to digital. AXIS T8640 comprises AXIS T8641 PoE+ over coax base unit. It can be used in those installationsthat require Power over Ethernet transmission over 100 m (328 ft).

The Dedicated Micros DM/KBC2 is a joystick keyboard for SD Advanced hybrid DVR/NVR. The SD Advanced DVR/NVR offers up to 32 camera connections in a combination of analogue or IP.

The remote keyboard includes PTZ control which increases the functionality.  The introduction of the 3-axis joystick means that an Operator can easily control the pan, tilt and zoom functionality with one simple movement and the additional telemetry buttons ensures that any feature supported on the 3rd Party PTZ or dome camera can be accessed and controlled via the DS keyboard.

Enhanced telemetry control.  A single System Sprite Remote Keyboard can also control up to 16 units.

Enables legacy coax cabling to be kept when converting an analogue system to digital Comprises of AXIS T8641 PoE+ Over Coax Base and AXIS T8643 PoE+ over Coax Compact Delivers standard Power over Ethernet (PoE) and centrally-sourced power through existing coax cabling The compact design allows for improved installation and cable management as it can easily be integrated in housings and back boxes

The Dedicated Micros Type dtx 1000/16 has coax telemetry control for easy installation and dual alarm outputs.

AXIS T8640 enables camera installers to keep the legacy coax cabling when converting an analogue system to digital. It delivers standard PoE and centrally-sourced power with no new cables required. AXIS T8640 comprises AXIS T8642 PoE+ over coax device unit. The device unit receives power from the coax and delivers up to full PoE+ power to the network camera.

DM/KBC/ACC is an SD keyboard extender.

The Dedicated Micros Type dtx 1000/8 has coax telemetry control for easy installation and dual alarm outputs.

Keyboard features include joystick control of telemetry camera with twist zoom facility; wash/wipe, iris, focus, preset, patrol and auto-pan keys; up to 16 BX2/DS2 units can be controlled from one keyboard; onboard LCD identifying connected unit name and number; removal of tracked telemetry camera from sequence and directly or remotely connected via 485 BUS cabling.

The Dedicated Micros Type dtx 1000/KB is a slave keyboard for both 8 and 16 camera base units.

Dedicated Micros RC03 allows basic remote control of a Sprite Lite multiplexer.  

KBC02 is a Dedicated Micros joystick keyboard for SD.