CCTV Switchers & Switches  (807)

• 24 × gigabit PoE ports, and 2 × gigabit fiber optical ports. • IEEE 802.3at/af standard for PoE ports. • Network topology management, alarm push, network health monitor. • 6 KV surge protection for PoE ports. • AF/AT camera can reach up to 300 m in extend mode. • PoE watchdog to auto detect and restart the cameras that do not respond. • Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

DS-3E2510P supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers DS-3E2510P has powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods DS-3E2510P supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade DS-3E2510P supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy DS-3E2510P supports IEEE 802.3AF/AT standard, built-in large power supply, no need of external power supply, that is, 24-port AF full-load power supply. DS-3E2510P supports the configuration of Base-T port priority when the power is inadequate. DS-3E2510P supports POE port and up to 4KV power thunder-proof. DS-3E2510P supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services DS-3E2510P provides flexible bandwidth control policies, supporting port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of network services DS-3E2510P supports multiple queue schedule algorithms such as SP, WRR, or “SP plus WRR” Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+ DS-3E2510P supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions DS-3E2510P supports perfect ring detection mechanism which ensures the long-term stable running of network DS-3E2510P supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MAC plus Port binding for ensuring user data security DS-3E2510P supports many management modes such as the console port, Telnet, SSH DS-3E2510P supports the WEB management mode, which is easy and efficient so that it makes installation and debugging convenient DS-3E2510P supports TFTP-patterned file upload/download management

Hikvision launched a new generation of Smart Managed Switches that, in conjunction with the Hik-Partner Pro mobile app, enable installers to remotely deploy and configure security systems with comprehensive operation and maintenance capabilities. This new generation of Smart Managed Switches features a robust architecture with 6 KV surge protection for PoE ports. The full portfolio ranges from an economical 100 Mbps switches up to high-powered Gigabit switches tailored for SMB projects. Seamless integration with security systems A rapid increase in the number of IP devices needed to fit the wide varieties of security scenarios has made network switches an essential tool. However, while traditional plug-and-play network switches provide connectivity, they may not converge with other security devices to extend synergy within a system. As the network in a business scenario becomes more complex, the device configuration becomes cumbersome and actually increases the workload.  But now, with this new generation of Smart Managed Switches, Hikvision integrates connectivity with management over the entire security system through its mobile app, Hik-Partner Pro. Hik-Partner Pro weaves together cameras, alarms, NVRs, access control devices, and software, creating a unified and easy-to-use security system for centralized, visualized operations and maintenance.  Further, with the mobile Hik-Partner Pro app, entire system deployment and configuration can be completed with a mobile phone in just three steps, making delivery simpler, faster and easier. The seamless integration provides installers with an all-in-one experience. Here’s more on how it works. Remote management – just like being on-site  The new generation of Smart Managed Switches enables installers to implement network operations and maintenance remotely, with no need to be at the site they are servicing. Two elements are critical here for maintaining such a setup: an intuitive bird’s-eye-view of the system as well as a way to resolve issues that come up. Visualized network topology. A network topology, visualized in the mobile app, allows installers to view and maintain a network intuitively, easily getting updates on network health status and device connection status. Efficient troubleshooting. Installers get real-time alarm notifications when a network or a device goes down, helping them quickly and remotely locate and resolve issues ranging from port reboots to parameter adjustments and more. This significantly reduces system downtime, as well as network operations and maintenance costs. Doing more in less time with lower expenditure Remote management saves time and eliminates transportation costs for installers. With Hik-Partner Pro, installers will extend and elevate their work efficiency as they maintain products using a mobile phone from any location and at any time of day, responding more quickly to ensure stable system performance for their customers. It can be a powerful tool for expanding their business and satisfying their customer base.

24 × gigabit PoE ports, and 2 × gigabit fiber optical ports IEEE 802.3at/af standard for PoE ports IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard 6 KV surge protection for PoE ports AF/AT camera can reach up to 300 m in extend mode PoE watchdog to auto detect and restart the cameras that do not respond PoE output power management Gigabit network access design Wire-speed forwarding Store-and-forward switching Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on Port management Web management Solid high-strength metal shell

• 16 × gigabit PoE ports, and 2 × gigabit fiber optical ports. • IEEE 802.3at/af standard for PoE ports. • Network topology management, alarm push, network health monitor. • 6 KV surge protection for PoE ports. • AF/AT camera can reach up to 300 m in extend mode. • PoE watchdog to auto detect and restart the cameras that do not respond. • Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

16 × Gigabit PoE ports, 2 × Gigabit SFP fiber optical ports IEEE 802.3at/af standard IEEE 802.3, IEEE 802.3u, and IEEE 802.3x standard 6 KV surge protection for PoE ports PoE power management Gigabit network access Wire-speed forwarding Store-and-forward switching Solid high-strength metal shell

Layer 2 network switch designed for video data transmission 16 x 10/100 Mbps PoE ports and 2 x 10/100/1000 Mbps combo uplink ports Various network management standards such as console, Telnet, SSH2.0, Web, SNMP v1/v2/v3, TFTP, RMON IEEE 802.3 af & at high PoE power supply Rich layer 2 features: supports STP, VLAN, mirroring, IGMP Snooping and IGMP v1/v2, L2/L3/L4 ACL, LACP, EAPS, ERPS, Qos Safe and reliable using 4 KV high surge protection.

Centralises power distribution for up to 16 Power Over Ethernet (PoE) IP Cameras IEEE 802.3af compliant, PoE Class 0/1/2/3/4 Easy all-in-one PoE connection eliminates the need for dedicated electrical outlets per IP Camera

Layer 3 network switch 24 x 10/100/1000 Mbps ethernet ports, 24 x 10/100/1000 Mbps SFP ports and 8 x 10G Mbps SFP+ uplink ports Various network management standards such as console, Telnet, SSH2.0, Web, SNMP v1/v2/v3, TFTP, RMON Supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers Powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods Supports In-Service Software Upgrade (ISSU) to ensure continuous data forwarding during system upgrade Supports various L2 multicast functions including IGMP-snooping, user fast-leave mechanism and trans-VLAN multicast copy Supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services Supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions Supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc Supports IPv6 tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4 tunnel, ISATAP Supports IPv4 transiting to IPv6: IPv6 manual tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel.

Hikvision has announced significant enhancements to its Hik-Partner Pro (HPP) app. This will improve the mobile experience with seamless installation and control of smart managed switches and security devices from a single, unified system. This year, Hikvision introduced its Smart Managed Switches, which integrate effortlessly with the HPP app. This provides installers with a user-friendly solution for managing various devices through one comprehensive system, allowing for fast delivery and easy remote device operations and maintenance. Randy Qian, Product Director at Hikvision, says, “At Hikvision, we strive for your operational convenience. Our enhanced HPP app offers an optimized visual representation and interaction of network topologies, ensuring that device connections and network status are easily accessible. This makes it far easier for installers to manage security systems remotely.” Mobile convenience based on a one-stop solution The enhancements to the HPP app significantly increase convenience for installers by providing a single environment for managing switches and security devices remotely. The one-stop solution provides three key benefits:  Simplified setupWith the app, installers can set up the system via their smartphone. This eliminates the need for extra equipment, such as computers or monitors.  Topology at a glanceInstallers can view the entire network topology on their mobile device, giving them immediate system insights, allowing them to identify and fix malfunctions faster.  Effortless maintenanceInstallers can use the system’s remote maintenance capabilities to carry out troubleshooting tasks directly on their phones, with no need for expensive, time-consuming site visits.  Tools for optimizing the network topology  In the latest iteration of HPP, the network topology feature has been greatly improved. One of the key upgrades is an easy-to-navigate interface for faster and more accurate visualization of the network structure.  To enhance topology visualization, the new version of HPP provides a range of features that enhance system visibility. The features, which include “aggregation”, “zoom”, “landscape view”, and “stacking”, provide in-depth details of the system topology, device status and other notifications. All of this gives users immediate insights into network health, bandwidth usage, power usage, and device details.  Real-time video from integrated IP cameras can also be viewed directly in the app, enabling better situational analysis and more efficient equipment management. The ability to zoom in and out of screenshots further extends the benefits for end users.  With these enhancements, status insights are just a tap away, fault diagnosis is streamlined and users can troubleshoot the entire system remotely, like a port reboot to swiftly address problems and to minimize downtime and disruptions. Networking and security in one Managing video and networking devices across various platforms can be complex, but the smart managed switch simplifies the process. Seamless integration with the HPP app ensures a streamlined management experience and a quick visit to the switch site gives users a comprehensive view of device interconnections and switch port status across the entire topology.  With enhanced visibility of the entire environment, unforeseen slowdowns become manageable events. At the same time, the system’s real-time monitoring and instant alerts eliminate the need for cross-system checks, enabling more efficient and proactive maintenance. Hikvision strives for deep integration between video and switches and plans to expand this integration to other network devices in the near future. This strategy will ensure that installers continue to enjoy streamlined, efficient, and secure networking management solutions.

Series Overview Highly intuitive, the Smart Managed Switch can manage local networks. With the DoLynk Care platform, it can also perform cloud management. The switch performs operation and maintenance using topology visualization on front-end, transmission and back-end storage devices that are in the security system and IT system. With its full metal design, the switch has great heat dissipation and can operate in temperatures ranging -10°C to 55°C. It offers EMC and has protection against overvoltage, overcurrent, static electricity, lightning strikes, pulses and other types of interference. For the PoE series Smart Managed Switch, power is supplied up to 250 meters away. The orange port supplies up to 60 W and the red port provides up to 90 W. Also, link aggregation and STP are available on select models to ensure the network remains stable. The switch can be used in small and medium-sized businesses such as supermarkets, offices, restaurants, cafés and hotels. Functions Cloud ManagementDevices can be managed through the DoLynk Care app and performs real-time monitoring of the network. The app also displays the status of devices, triggers alarms for errors in real time and sends notifications. Network Topology ManagementSupports the LLDP protocol and is able to generate and display the network topology, so that you can quickly identify issues, and perform operation and maintenance remotely on devices that are in the topology. Hi-PoE 60W (Orange Port)In addition to the IEEE802.3af and IEEE802.3at standards, orange port also supports a maximum power output of 60W for powering highpower devices. Long Distance PoEThe transmission distance of a PoE port can be up to 250 m, meeting the requirement of wired transmission (bandwidth reduced to 10 Mbps). PoE WatchdogAdopts the innovative PoE Watchdog. It enables the switch to automatically detect port status and restart the failed ports to recover connection in case of IPC connection exception. This enables intelligent operation and maintenance management in its true sense and effectively reduces manual maintenance costs. Spanning Tree Protocol (STP)Uses algorithms that calculate the best loop-free path through a Layer 2 network while providing path redundancy to prevent the occurrence of broadcast storms and enhance the stability of operations and services. Loop ProtectionWhen a loop is detected, the loop alarm will be triggered and the elimination mechanism will activate to prevent broadcast storms from occurring.

Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE 802.3z, IEEE 802.1Q, and IEEE802.3x Ethernet standards  16*10/100 Base-TX Ethernet ports, one 10/100/1000 Base-T Ethernet port and one 10/100/1000 Base-X SFP optical module port  Ports 1 - 16 are 10/100 Mbps downlink ports and comply with IEEE 802.3af and IEEE 802.3at. The maximum of 30W port output PoE power and the maximum of 135W total output PoE power

802.3af/at PoE standard 8-core power supply technology, reducing the power circuit loss Data monitor and control for the important ports EXTEND mode available to extend the network cable transmission distance to 250 meters Buffer optimization to guarantee the video data transmission VLAN configurable Port trunk STP, multicast and port mirroring QoS SNMP WEB management Store-and-forward switching IEEE802.3, IEEE802.3u and IEEE802.3x network standards available MTBF (Mean Time Between Failure) ≥ 100,000 hours All-metal enclosed construction Table-mounted and rack-mounted design for convenient installation

8 × 10/100Mbps PoE ports, and and 2 × Gigabit RJ45 port. IEEE 802.3at/af standard for PoE ports (Max. 60 W PoE output). IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard. 6 KV surge protection for PoE ports. Up to 300 m long-range transmission. Wire-speed forwarding. Store-and-forward switching. Solid high-strength metal shell. Reliable fan-free design.

Wireless Access Control. WAN 2 × GE, LAN 10 × GE (PoE+), 1 × USB. All-in-one Gateway. Embedded PoE+ Capability, supports 802.3af/802.3at PoE function. DH-AWA Series 802.11ax AP Management. Flexible Forwarding Modes. Smart Roaming Features.

Layer 2 network switch designed for video data transmission 12 x 10/100/1000 Mbps ethernet ports and 12 x 10/100/1000 Mbps SFP ports IEEE 802.3, IEEE802.3u and IEEE802.3x network standards available Store-and-forward switching Delay of data-exchange less than 5us Safe and reliable using 4 KV high surge protection Plug and play ensures simplicity and convenience.

100 Mbps PoE ports and gigabit uplink ports. The red port meets the IEEE 802.3bt standard. Power supply supports up to 90 W. PoE watchdog monitors the status of terminals in real-time. Supports 250 m long-distance power supply. Supports the power management policy. 8-pin PoE offers better compatibility and reduces cable loss. Durable full-metal housing provides great heat dissipation.

Intelligent PoE PD Alive(PoE Watchdog) Long Distance PoE Transmission Smooth Transmission Wide Working Temperature: –10 to 55°C (14°F to 131°F) Port Isolation

Powerful L2 and L3 Features Enterprise-level Connectivity Intelligent Resilient Framework 2 (IRF2)

Layer 3 network switch 32 x 10/100/1000 Mbps ethernet ports and 8 x 10G Mbps SFP+ uplink ports Various network management standards such as console, Telnet, SSH2.0, Web, SNMP v1/v2/v3, TFTP, RMON Supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the high reliability requirements of carriers Powerful ACL functions to access and control L2-L7 data, providing carriers with flexible and varied policy control methods Supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade Supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy Supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services Supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions Supports the IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc；Supports IPv6 tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4 tunnel, ISATAP；Supports IPv4 transiting to IPv6: IPv6 manual tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel

8 × Gigabit PoE ports, 1 × Gigabit RJ45 port, 1 × Gigabit SFP fiber optical port IEEE 802.3at/af standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard 6 KV surge protection for PoE ports PoE power management Gigabit network access Wire-speed forwarding and non-blocking design Store-and-forward switching Solid high-strength metal shell Reliable fan-free design

Powerful L2 and L3 Features Enterprise-level Connectivity Intelligent Resilient Framework 2 (IRF2)

 Support eight 10/100M PoE power supply ports, and two 10/100M  uplink ports Support 802.3af and 802.3at standards Operating Temperature: -10°C to +55°C Support 250 m long distance PoE tansmission Support PoE watchdog

Intelligent PoE Red Port Supports BT 90W All-giga Ports Smooth Transmission Wide Working Temperature: –10°C to 55°C (14°F to 131°F) Plug and Play

High performance industrial PoE switch DS-3T0310P supports IEEE 802.3AF/AT standard POE port maximum output power 30W (input voltage is greater than 50V) Design of redundant dual power input Working environment temperature of no fan -40℃to +75℃ The average failure time reached 400 thousand hours IEEE802.3x full duplex, backpressure flow control

Intelligent PoE Management - When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime Up to 300 m long range PoE transmission 6KV surge protection to improve reliability in harsh environment Supports prior and stable transmission of the important surveillance area video when connected to the high priority ports

Ports 1 to 4 support IEEE 802.3af standard When the switch is in EXTEND mode and the data rate is 10 Mbps, ports 1 to 4 support long-distance data transmission up to 250 meters All ports support 6 kV lightning protection This switch supports Auto MDI/MDIX This switch supports store-and-forward

All-gigabit ports provide real-time transmisstion with no lag. The red port meets the IEEE 802.3bt standard. Power supply supports up to 90 W. PoE watchdog monitors the status of terminals in real-time. Supports 250 m long-distance power supply. Supports the power management policy. 8-pin PoE offers better compatibility and reduces cable loss. Durable full-metal housing provides great heat dissipation.

4 × Gigabit PoE ports, 1 × Gigabit RJ45 port IEEE 802.3at/af standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard 6 KV surge protection for PoE ports PoE power management Gigabit network access Wire-speed forwarding and non-blocking design Store-and-forward switching Solid high-strength metal shell Reliable fan-free desig

Excellent performance 64Gbps backplane capacity; non-blocking design; video streaming forwarding at full speed; Gigabit optical-fiber transmission with up to 120Km distance; High security and reliability Providing multiple user authentication modes such as 802.1x authentication; Port-MAC-IP bind; Special ARP invasion detection to effectively stop ARP cheat; Flexible and various managements Adopt cluster technology, support device stacking and use an unified IP address for management; Multiple management modes such as Console port, Telnet, Web and SNMP; Powerful flow and broadcast management Automatically detecting and controlling broadcast storms, monitoring IGMP packets and effectively preventing broadcast packet's flooding; Flow control in full-duplex mode or half-duplex mode; The rate limitation in a minimum step of 64K is supported on the Ethernet port; IP multicast and QoS; Varied protocols 802.3af power supply on all ports; 802.3at power supply with the maximum power supply on each port reaching up to 30W; Configurable power supply priority guarantees, continuous power supply at key network nodes; Configurable power consumption to save power and users' cost.

Compliant IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x standards Supports IEEE802.3af, IEEE802.3at, Hi-PoE standards Supports normal working mode, port isolation (VLAN) mode, monitoring mode, network extend mode. Supports Store-and-Forward 24*10/100Mbps ports, 1*Gigabit Combo port, support port auto flipping (Auto MDI / MDIX) Port 1-2 support the maximum power of 60W, PoE output total power up to 190W Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode 4K entry MAC address table with auto-learning and auto-aging LED indicators for monitoring power, link and activity

DS-3E0105P-E is a 4 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as IP Cameras or IP Phones.

Compliant with IEEE802.3, IEEE802.3u, IEEE802.3X, IEEE802.3ab Ethernet standards  24*10/100/1000Mbps auto-negotiation RJ45 ports  Auto MDI/MDIX  8K MAC address and MAC address learning  IEEE 802.3x full duplex flow control, and Backpressure half duplex flow control  48 Gbps backplane bandwidth for non-blocking line-speed forwarding

Intelligent PoE PD Alive(PoE Watchdog) Long Distance PoE Transmission Smooth Transmission Wide Working Temperature: –10 to 55°C (14°F to 131°F) Port Isolation

DS-3E2528 supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers; DS-3E2528 has powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods; DS-3E2528 supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade; DS-3E2528 supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy; DS-3E2528 supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services; DS-3E2528 provides flexible bandwidth control policies, supporting port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of network services; DS-3E2528 supports multiple queue schedule algorithms such as SP, WRR, or “SP plus WRR”; Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions; Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+; DS-3E2528 supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions; DS-3E2528 supports perfect ring detection mechanism which ensures the long-term stable running of network; DS-3E2528 supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MAC plus Port binding for ensuring user data security; DS-3E2528 supports many management modes such as the console port, Telnet, SSH; DS-3E2528 supports the WEB management mode, which is easy and efficient so that it makes installation and debugging convenient; DS-3E2528 supports TFTP-patterned file upload/download management;

802.3af/at PoE standard 8-core power supply technology, reducing the power circuit loss Data monitor and control for the important ports EXTEND mode available to extend the network cable transmission distance to 250 meters Buffer optimization to guarantee the video data transmission VLAN configurable Port trunk STP, multicast and port mirroring QoS SNMP WEB management Store-and-forward switching IEEE802.3, IEEE802.3u and IEEE802.3x network standards available MTBF (Mean Time Between Failure) ≥ 100,000 hours All-metal enclosed construction Table-mounted and rack-mounted design for convenient installation

24 × Gigabit PoE ports, 2 × Gigabit SFP fiber optical ports. IEEE 802.3at/af standard. IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard 6 KV surge protection for PoE ports PoE power management Gigabit network access Wire-speed forwarding Store-and-forward switching Solid high-strength metal shell

Compliant IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x standards Supports IEEE802.3af, IEEE802.3at, Hi-PoE standards Supports normal working mode, port isolation (VLAN) mode, monitoring mode, network extend mode. Supports Store-and-Forward 16*10/100Mbps ports, 1*Gigabit Combo port, support port auto flipping (Auto MDI / MDIX) Port 1-2 support the maximum power of 60W, PoE output total power up to 135W Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode 4K entry MAC address table with auto-learning and auto-aging LED indicators for monitoring power, link and activity

High performance industrial PoE switch DS-3T0306P supports IEEE 802.3AF/AT standard POE port maximum output power 30W (input voltage is greater than 50V) Design of redundant dual power input Working environment temperature of no fan -40℃to +75℃ The average failure time reached 400 thousand hours IEEE802.3x full duplex, backpressure flow control

Excellent performance 64Gbps backplane capacity; non-blocking design; video streaming forwarding at full speed; Gigabit optical-fiber transmission with up to 120Km distance; High security and reliability Providing multiple user authentication modes such as 802.1x authentication; Port-MAC-IP bind; Special ARP invasion detection to effectively stop ARP cheat; Flexible and various managements Adopt cluster technology, support device stacking and use an unified IP address for management; Multiple management modes such as Console port, Telnet, Web and SNMP; Powerful flow and broadcast management Automatically detecting and controlling broadcast storms, monitoring IGMP packets and effectively preventing broadcast packet's flooding; Flow control in full-duplex mode or half-duplex mode; The rate limitation in a minimum step of 64K is supported on the Ethernet port; IP multicast and QoS; Varied protocols 802.3af power supply on all ports; 802.3at power supply with the maximum power supply on each port reaching up to 30W; Configurable power supply priority guarantees, continuous power supply at key network nodes; Configurable power consumption to save power and users' cost.