CCTV Switchers & Switches  (807)

The TSB 082 is a high quality microprocessor based video switcher.  Optional alarm card TAC 081 is suitable to connect up to eight alarm sensors.  Standard BNC-type input and output connectors enables the TSB 082 to be used with other CCTV switchers, cameras, monitors and video tape recorders.

Compliant with IEEE 802.3af/at Auto-MDI/MDI-X Auto-Negotiation Store and Forward Supports US plug

Compliant with IEEE 802.3af/at Auto-MDI/MDI-X Auto-Negotiation Store and Forward Supports EU plug

Full power 390W. 24-port 10/100 Mbps network with PoE. 2-port 1 Gigabit/SFP network. LED indicators.

The TX1500 video matrix from BBV provides a flexible and versatile solution for controlling up to 96 cameras.  Key features include:BBV "up-the-coax" control is provided as standard, and a wide range of receivers suitable for driving traditional PTZ is available Fully compatible with the RX100 range of receivers - allowing "up-the-coax" control of most domes currently available RS485 control option - an RS485 8 port drive card is available for applications requiring RS485 control Integration of products from different manufacturers - the RS485 8 port drive card can be provided with the option of a protocol converter allowing the integration of products from different manufacturers on one system Digital recording and transmission interface - the BBV PIC-A-POINT graphical user interface can be tailored to each client's exact requirements

Output card for ViCros III matrix switching system.  Signal mode: CCIR/PAL or EIA/NTSC.  16 x composite (2 x SMB sockets) 1 Vpp/75 Ohm or Hi-Z (linkable) for loop-through or signal outputs.

Manual channel selection & Auto channel cycle with operator set time period. Any single channel may be locked out by the installer using a secret setting key to hide unused or covert cameras.

The Compax-16/4 compact matrix is suitable for use as a switching and control unit for small to midsize video surveillance systems.  It connects multiple control keyboards via serial interface.  Controls pan/tilt heads in conjunction with MBeg, KDec-300 and UniLink.  On-screen camera number and tilting with Ziff/Text/CMX-16/4 text insertion module.  Pluggable, cage-clamp interconnection terminals.

Removable terminal blocks. 20Hz-20KHz audio bandwidth.

Removable terminal blocks. 20Hz-20KHz audio bandwidth.

IJ1748D is a PoE injector and splitter.

Matrix System 650 from Panasonic is the new, easier way to configure mid-sized to large surveillance systems. Panasonic WJ-SX650U/G is a matrix expansion cage with 3 card slots.

IFS NS3502-8P-2S is a 8 port gigabit PoE+ managed switch that features eight 10/100/1000Mbps Gigabit Ethernet ports with support for PoE+ (30w) and 2 Gigabit SFP ports. Both 100Base-X or 1000Base-X transmission is supported through two GBIC interfaces.

Can be increased to 256 inputs and 80 outputs with multiple master and slave keyboard control positions. Alarm pre-positioning and patrol modes are featured.

Up to 32 Inputs / 8 Outputs.  Multiple Language On-Screen Menu Driven Set-up.  Time/Date/Text Insertion. Group Call-up for Cameras/Monitors.  Programmable Camera Sequences incl.  Preset Calls.

LILIN PMH-24G250W  switch supports 88G non-blocking switch fabric. The EEE feature reduces the power consumption when there is no traffic forwarding even port is still connected. The 10G uplink port design is available and important for high bandwidth uplink request when cascaded with other switch. The user can also aggregate the 10G ports as Trunk group to enlarge the bandwidth.

LILIN PMH-24G500W  switch supports 88G non-blocking switch fabric. The EEE feature reduces the power consumption when there is no traffic forwarding even port is still connected. The 10G uplink port design is available and important for high bandwidth uplink request when cascaded with other switch. The user can also aggregate the 10G ports as Trunk group to enlarge the bandwidth.

Spot and sequence output. Vertical interval switching.  Multilingual on-screen menu programming.  Selectable dwell times.  Frame-by-frame switching.  Programmable bypass function.  VCR head switch pulse input.  Alarm and remote control input.  Alarm/switcher output.  Camera/sequence and alarm no display.

MES106 layer 2 Ethernet switches are perfect choices for high capacity IP video streaming networks. MES series meets the tight quality and performance requirements specified by several marine, military, railway and IT equipment standards.

Outputs selectable as spot or sequence.  Vertical interval switching.  Selectable dwell time.  Programmable bypass function.

Desktop keyboard for use with CM6700 series, variable speed PTZ functions.

Veracity VCS-8P2 CAMSWITCH 8 Plus is a POE network switch. Designed for installers with no user setup required and automatic configuration, CAMSWITCH Plus network switches are 803.af/at POE 10/100 switches which meet the challenges of IP video installation. They can be powered by POE, doubling the distance to connected devices or enabling network connections to be added easily to existing installations. CAMSWITCH Plus can deliver up to the full 25.5 watts required by IEEE 802.3at POE Plus devices such as outdoor or PTZ cameras. Up to 25 watts budget at 200 metres is available using Veracity's OUTSOURCE Plus injector.   When a 57V power supply is used, CAMSWITCH Plus can deliver enhanced POE to Veracity OUTREACH Max, HIGHWIRE PowerStar and LONGSPAN products for maximum range. A selection of power supply options are available to suit the total power requirements and placement considerations of the installation.   CAMSWITCH 4 Plus features 4 802.3at POE ports, and a 5th port for downlink, and is compatible with Veracity's rack-mounting system.

Veracity VCS-4P1 CAMSWITCH 4 Plus is a POE network switch. Designed for installers with no user setup required and automatic configuration, CAMSWITCH Plus network switches are 803.af/at POE 10/100 switches which meet the challenges of IP video installation. They can be powered by POE, doubling the distance to connected devices or enabling network connections to be added easily to existing installations. CAMSWITCH Plus can deliver up to the full 25.5 watts required by IEEE 802.3at POE Plus devices such as outdoor or PTZ cameras. Up to 25 watts budget at 200 metres is available using Veracity's OUTSOURCE Plus injector.  When a 57V power supply is used, CAMSWITCH Plus can deliver enhanced POE to Veracity OUTREACH Max, HIGHWIRE PowerStar and LONGSPAN products for maximum range. A selection of power supply options are available to suit the total power requirements and placement considerations of the installation.  CAMSWITCH 4 Plus features 4 802.3at POE ports, and a 5th port for downlink, and is compatible with Veracity's rack-mounting system.

16 channels, 9 outputs, 16 alarms, Sequential, 1.0 Vp-p, CVBS, 75 Ohms, 88 x 430 x 405, 4.3 kg, 100 V ~240 V AC, 30 W, 0 ~ 40, Matrix Switchers

The KBD960/KBR960 keyboards provide system users with the maximum degree of flexibility in controlling camera call-up and pan/tilt or dome operation. Twenty-four programmable soft keys may be individually labelled with installation-specific titles. This allows logical camera selection based on the camera’s field of view rather than camera numbers. The KBD960/KBR960 includes a variable speed, vector-solving joystick with zoom control knob for pan/tilt/zoom and dome control. All additional lens control functions are positioned next to the joystick for one-handed operation. LCD display keys give system operators fingertip control of powerful programming and operational features. These keys access multiple menus of logically displayed icons for simplistic operation. All programmable soft keys illuminate when auxiliaries are activated.

Desktop keyboard for use with CM6700 series, PTZ functions.

Cyclic switcher. Programmable scanning time, programmable video input skip.

16 channels, 2 outputs, 4 alarms, Matrix Switchers

Cyclic switcher. Programmable scanning time, programmable video input skip.

Multiple Language On-Screen Menu Driven Set-up.  Time/Date/Text Insertion.  Group Call-up for Cameras/Monitors.  Programmable Camera Sequences incl.  Preset Calls.

Veracity VCS-4P1-MOB CAMSWITCH 4 Mobile switch is the ideal solution for installing IP cameras and other POE and network devices in transport, battery/solar powered and other low-voltage applications. It integrates a 5 port 10/100 Ethernet switch with the capability to convert an 8 to 40 volt DC supply into an 80 watt IEEE 802.3af/at compliant power source.

16-Port 10/100BaseT(X) with 16 PoE + 2-Port Gigabit Copper/SFP Combo Uplink IEEE 802.3at PoE+, up to 30W per port Web-based Configuration and Management VLAN, QoS, RSTP, IGMP Snooping, LACP, Port Security, Bandwidth Control, Storm Control Supports EU plug

16-Port 10/100BaseT(X) with 16 PoE port 2-Port Gigabit Copper IEEE 802.3at PoE, up to 30W per port 2 SFP Open Slots Supports EU plug

8-port 10/100M PSE Ports + 2-Port Gigabit Uplink (1*TP,1*SFP) IEEE 802.3at PoE+, up to 30W per port Web-based Configuration and Management VLAN, QoS, RSTP, IGMP Snooping, LACP, Port Security, Bandwidth Control, Broadcast Storm Control Supports US plug

8-port 10/100M PSE Ports + 2-Port Gigabit Uplink (1*TP,1*SFP) IEEE 802.3at PoE+, up to 30W per port Web-based Configuration and Management VLAN, QoS, RSTP, IGMP Snooping, LACP, Port Security, Bandwidth Control, Broadcast Storm Control Supports EU plug

8-port 10/100M PSE/Power over Ethernet Ports IEEE 802.3at PoE+, up to 30W per port Auto-MDI/MDI-X, Auto-Negotiation Supports US plug

8-port 10/100M PSE/Power over Ethernet Ports IEEE 802.3at PoE+, up to 30W per port Auto-MDI/MDI-X, Auto-Negotiation Supports EU plug

16-Port 10/100BaseT(X) with 16 PoE + 2-Port Gigabit Copper/SFP Combo Uplink IEEE 802.3at PoE+, up to 30W per port Web-based Configuration and Management VLAN, QoS, RSTP, IGMP Snooping, LACP, Port Security, Bandwidth Control, Storm Control Supports US plug