CCTV Switchers & Switches  (807)

DS-3E23XXP Series supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers;  DS-3E23XXP Series has powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods;  DS-3E23XXP Series supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade

802.3af/at PoE standard 8-core power supply technology, reducing the power circuit loss Data monitor and control for the important ports EXTEND mode available to extend the network cable transmission distance to 250 meters Buffer optimization to guarantee the video data transmission VLAN configurable Port trunk STP, multicast and port mirroring QoS SNMP WEB management Store-and-forward switching IEEE802.3, IEEE802.3u and IEEE802.3x network standards available MTBF (Mean Time Between Failure) ≥ 100,000 hours All-metal enclosed construction Table-mounted and rack-mounted design for convenient installation

Intelligent PoE Management - When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime Up to 300 m long range PoE transmission IEEE 802.3bt standard Hi-PoE port provides max. 90 W power supply for high power devices such as domes or other 802.3bt devices 6KV surge protection to improve reliability in harsh environment

16 × gigabit PoE ports, and 2 × gigabit fiber optical ports IEEE 802.3at/af standard for PoE ports IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard 6 KV surge protection for PoE ports. PoE output power management AF/AT camera can reach up to 300 m in extend mode PoE watchdog to auto detect and restart the cameras that do not respond Gigabit network access design Wire-speed forwarding Store-and-forward switching. Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on Port management Web management Solid high-strength metal shell

Intelligent PoE Management - When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime Up to 300 m long range PoE transmission 6KV surge protection to improve reliability in harsh environment Supports prior and stable transmission of the important surveillance area video when connected to the high priority ports

24 x 1000M Ethernet ports Supports IEEE 802.3, IEEE 802.3u and IEEE 802.3x 1000M network access Wire-speed forwarding and non-blocking design Store-and-forward switching Solid high-strength metal shell Fan-free design with high reliability

8 × 100 Mbps PoE RJ45 port, 2 × gigabit combo. IEEE 802.3at/af standard for PoE ports. Network topology management, alarm push, network health monitor. 6 KV surge protection for PoE ports. AF/AT camera can reach up to 300 m in extend mode.

Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab Ethernet standard  8*10/100/1000Mbps auto-negotiation RJ45 Ports  Plug and play without configuration  Up to 16 Gbps back panel bandwidth and supports non-blocking wire-speed forwarding  LEDs to easily monitor link speed, activity and find problems in time  IEEE802.3x full duplex flow control and half duplex backpressure flow control

Intelligent PoE Red Port Supports BT 90W All-giga Ports Smooth Transmission Wide Working Temperature: –10 to 55°C (14°F to 131°F) Plug and Play

The device is a layer-2 commercial switch. It provides high-performance switching engine and large buffer memory to ensure smooth video stream transmission. With a full-metal and fanless design, the device features great heat dissipation capability on the shell surface, and is able to work in the environment from –10 °C to +55 °C. It adopts EMC (Electro Magnetic Compatibility) protection design, which meets the Class B standard. With Telnet, WEB management, SNMP (Simple Network Management Protocol) and other functions, the device can be remotely managed. The device can directly connect to iLinks-View.

8 x 10/100/1000 Mbps ethernet ports Supports ADI/ADIX Store-and-forward switching Supports MAC address auto-learning and aging Simple, compact body design Supports desktop and wall-mounting Plug & play, easy to use.

6 × gigabit PoE RJ45 ports, 2 × gigabit Hi-PoE RJ45 ports and 2 × gigabit SFP fiber optical ports. IEEE 802.3at/af/bt standard for Hi-PoE port (Max. 90 W PoE output). IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output). IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard. 6 KV surge protection for PoE ports. Up to 300 m long-range transmission. PoE watchdog to auto detect and restart the cameras that do not respond. Port isolation to improve network security. Wire-speed forwarding. Wider temperature (-30 to 65 °C) design. Store-and-forward switching. Solid high-strength metal shell. Reliable fan-free design.

16 × 100 Mbps PoE RJ45 port, 2 × gigabit combo. IEEE 802.3at/af standard for PoE ports. Network topology management, alarm push, network health monitor. 6 KV surge protection for PoE ports. AF/AT camera can reach up to 300 m in extend mode.

Intelligent PoE Management - When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime Up to 300 m long range PoE transmission 6KV surge protection to improve reliability in harsh environment Supports prior and stable transmission of the important surveillance area video when connected to the high priority ports

• 8 × gigabit PoE ports, and 2 × gigabit fiber optical ports. • IEEE 802.3at/af standard for PoE ports. • Network topology management, alarm push, network health monitor. • 6 KV surge protection for PoE ports. • AF/AT camera can reach up to 300 m in extend mode. • PoE watchdog to auto detect and restart the cameras that do not respond. • Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.

Layer 2 managed industrial PoE switch Support IEEE80.3af, IEEE80.3at and Hi-PoE (60W) standard Support STP, RSTP and MSTP Support ERPS Support L2 features, including VLAN, link aggregation, IGMP Snooping, LLDP ACL, QoS etc. Support Web, SNMP and CLI management IP40 full metal enclosure, fully-sealed and dustproof design Dual power input for power redundancy Wide operating temperature: -40°C to +75°C

Layer 2 managed industrial PoE switch Supports IEEE802.3af/at and Hi-PoE (60W) standard Supports STP/RSTP/MSTP for network redundancy Supports ERPS for network redundancy Supports rich L2 features including VLAN, Link Aggregation, IGMP Snooping, LLDP ACL, QoS, etc Supports Web, SNMP and CLI management IP40 full metal enclosure, fully-sealed and dustproof design Dual power input for power redundancy

Intelligent PoE Management - When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime Up to 300 m long range PoE transmission 6KV surge protection to improve reliability in harsh environment Supports prior and stable transmission of the important surveillance area video when connected to the high priority ports

Intelligent PoE Management - When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime Up to 300 m long range PoE transmission 6KV surge protection to improve reliability in harsh environment Supports prior and stable transmission of the important surveillance area video when connected to the high priority ports

• 8 × 100 Mbps PoE RJ45 ports, 1 × gigabit network RJ45 port. • IEEE 802.3at/af standard for PoE ports. • Network topology management, alarm push, network health monitor. • 6 KV surge protection for PoE ports. • Up to 300 m long-range transmission. • AF/AT camera can reach up to 300 m in extend mode.

12 × gigabit PoE ports, 4 × gigabit Hi-PoE ports, 2 × gigabit RJ45 ports, and 2 × gigabit fiber optical ports. IEEE 802.3at/af/bt standard for Hi-PoE ports (Max. 90 W PoE output). IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output). IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard. 6 KV surge protection for PoE ports. Up to 300 m long-range transmission. PoE watchdog to auto detect and restart the cameras that do not respond. Port isolation to improve network security. Gigabit network access design. Wire-speed forwarding. Store-and-forward switching. Solid high-strength metal shell.

DS-3E0109P-E is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as IP Cameras or IP Phones.

DS-3E0318P-E is an 16 10/100Mbps ports unmanaged switch that requires no configuration and provides 16 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as IP Cameras or IP Phones.

Hardened L2+ managed aggregation Switch 24GE+4 x GE/10GE SFP+ Switching Capacity: 128Gbps High lightning protection: Common/Differential mode 4KV/2KV Wide working temperature: -20~55°C SFP+ fiber uplink Fanless thermal design Rack mounting

Two-layer PoE Ethernet switch MAC auto study and aging, MAC address list capacity is 1K Support IEEE802.3af, IEEE802.3at standard Conform IEEE802.3, IEEE802.3u and IEEE802.3X standards

Two-layer PoE Ethernet switch MAC auto study and aging, MAC address list capacity is 2K Support IEEE802.3af, IEEE802.3at standard Conform IEEE802.3, IEEE802.3u and IEEE802.3X standards

Layer 2 network management PoE switch Support IEEE802.3af, IEEE802.3at standard Support Hi-PoE 60W Network Redundancy: STP/RSTP/MSTP Support IPv4/IPv6, and DHCP Network management based on SNMP Configuration: Web, Telnet, CLI Command QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL Large data cache(4M), real-time transmission MAC auto study and aging, MAC address list capacity is 8K EMC high protection design

Layer 2 Hardened Ethernet switch MAC auto study and aging, MAC address list capacity is 4K Support IEEE802.3af, IEEE802.3at and Hi-PoE standard Conform IEEE802.3, IEEE802.3u, IEEE802.3ab/z and IEEE802.3X standards Adopts metal structure Industrial wide working temperature design: -30°C~+65°C High protection grade, supports common mode 4KV, differential mode 2KV Supports dual power backup

 Support four 10/100M PoE power supply ports, and two 10/100M   uplink ports · Support 802.3af and 802.3at standards OperatingTemperature: -10°C to +55°C Support 250 m long distance PoE tansmission Support PoE watchdog

6 × gigabit PoE ports, 2 × gigabit Hi-PoE ports, 1 × gigabit RJ45 port, and 1 × gigabit fiber optical port. IEEE 802.3at/af/bt standard for Hi-PoE ports (Max. 90 W PoE output). IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output). IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard. 6 KV surge protection for PoE ports. Up to 300 m long-range transmission. PoE watchdog to auto detect and restart the cameras that do not respond. Port isolation to improve network security. Gigabit network access design. Wire-speed forwarding. Store-and-forward switching. Solid high-strength metal shell. Reliable fan-free design.

24 × 100 Mbps PoE RJ45 port, 2 × gigabit combo. IEEE 802.3at/af standard for PoE ports. Network topology management, alarm push, network health monitor. 6 KV surge protection for PoE ports. AF/AT camera can reach up to 300 m in extend mode.

8 x 1000M Ethernet ports Supports IEEE 802.3, IEEE 802.3u and IEEE 802.3x. 1000M network access Wire-speed forwarding and non-blocking design Store-and-forward switching Solid high-strength metal shell Fan-free design with high reliability

Provides wide access for devices, and offers security control and enhanced network manageability Meets the need of digital transformation and security transmission Powerful L2 and L2+ Features Green and Fan-less Design Intelligent Resilient Framework 2 (IRF2) Ideal for small and medium-sized enterprises, chain businesses, branches, the government, schools and hotels

5 x 10/100/1000 Mbps ethernet ports Supports ADI/ADIX Store-and-forward switching Supports MAC address auto-learning and aging Simple, compact body design Supports desktop and wall-mounting Plug & play, easy to use.

Support eight 10/100/1000Mbps PoE Ethernet ports, and two 10/100/1000Mbps Ethernet ports Operating Temperature: –10°C to + 55°C PoE Power Requirement: 48V DC–57V DC Input

Layer 2 network management PoE switch Support IEEE802.3af, IEEE802.3at standard Support Hi-PoE 60W Network Redundancy: STP/RSTP/MSTP Support IPv4/IPv6, and DHCP Network management based on SNMP Configuration: Web, Telnet, CLI Command QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL Large data cache(4M), real-time transmission MAC auto study and aging, MAC address list capacity is 8K EMC high protection design

Provides wide access for devices, and offers security control and enhanced network manageability Meets the need of digital transformation and security transmission Powerful L2 and L2+ Features Green and Fan-less Design Intelligent Resilient Framework 2 (IRF2) Ideal for small and medium-sized enterprises, chain businesses, branches, the government, schools and hotels

DS-3E2528P supports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers DS-3E2528P has powerful ACL functions to access and control L2-L7 data, providing carriers flexible and various policy control methods DS-3E2528P supports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade DS-3E2528P supports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy DS-3E2528P supports IEEE 802.3AF/AT standard, built-in large power supply, no need of external power supply, that is, 24-port AF full-load power supply. DS-3E2528P supports the configuration of Base-T port priority when the power is inadequate. DS-3E2528P supports POE port and up to 4KV power thunder-proof. DS-3E2528P supports priority retagging and complicated flow classification based on VLAN, MAC, source address, destination address, IP or priority to better streamline carrier’s services DS-3E2528P provides flexible bandwidth control policies, supporting port-/flow-based flow limit, and ensuring the line speed forwarding of each port to make sure the high quality of network services DS-3E2528P supports multiple queue schedule algorithms such as SP, WRR, or “SP plus WRR” Equipment-level security: The advanced hardware infrastructure design realizes the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions Perfect security authentication mechanisms: IEEE 802.1x, Radius and BDTacacs+ DS-3E2528P supports storm/multicast/unicast limit which ensures the normal running of equipment in harsh network conditions DS-3E2528P supports perfect ring detection mechanism which ensures the long-term stable running of network DS-3E2528P supports port isolation within the same VLAN, DHCP-Snooping, and IP plus MAC plus Port binding for ensuring user data security DS-3E2528P supports many management modes such as the console port, Telnet, SSH DS-3E2528P supports the WEB management mode, which is easy and efficient so that it makes installation and debugging convenient DS-3E2528P supports TFTP-patterned file upload/download management

5 x 10/100 Mbps ethernet ports Supports ADI/ADIX Store-and-forward switching Supports MAC address auto-learning and aging Simple, compact body design Supports desktop and wall-mounting Plug & play, easy to use.

Layer 2 network management PoE switch Support IEEE802.3af, IEEE802.3at standard Support Hi-PoE 60W Network Redundancy: STP/RSTP/MSTP Support IPv4/IPv6, and DHCP Network management based on SNMP Configuration: Web, Telnet, CLI Command QoS (IEEE802.1p/1Q), CoS/ToS to Increase Determinism Enhanced Network Security with IEEE802.1X, SNMP v1/v2c/v3, HTTPS, and SSH/SSL Large data cache(4M), real-time transmission MAC auto study and aging, MAC address list capacity is 8K EMC high protection design