CCTV Switchers & Switches  (807)

The ComNet™ CNGE24MS has eight 100/1000Base-FX SFP ports and sixteen Gigabit combo ports that allow for TX or FX transmission. All SFP ports utilize ComNet SFP modules for fibre and connector type and distance. The IEEE802.3-compliant unit offers multiple Ethernet redundancy protocols (ComRing, C-Ring, and MSTP/RSTP/STP) which protect your applications from network interruptions or temporary malfunctions by redirecting transmission within the network.

IFS GE-DS-82 is a 8 ports managed switch that features eight 10/100Mbps Fast Ethernet ports with 2 Gigabit TP/SFP combo ports. The 2 Gigabit TP/SFP combo ports can support either 10/100/1000Mbps (RJ45) or (1000Base-SX/LX/BX) through an SFP (Small Form-factor Pluggable) GBIC interface.

These switchers feature automatic sequencing, adjustable dwell time, vertical interval switching, instant homing, camera indicators, and automatic skip.  These units automatically sequence from camera to camera; dwell time is adjustable from 2 to 45 seconds.  Vertical interval switching is provided to reduce picture distortion during automatic sequencing.

Switching Time: Less than 1 microsecond.  Dwell Time: Each camera individually or globally set from 1 to 64 seconds.  Alarm Dwell Time: 1 s to 64 s.  Alarm Capture Time: 1 s to 63 s.

The ComNet™ CNGE8MS is an 8-port managed ethernet switch designed to reliably operate in harsh, environmentally challenging applications. It features four (4) 1000BASE-TX and four (4) gigabit combo ports. The four combo ports are 10/100/1000Mbps configurable for either Cat5-e copper, or multimode or single-mode optical fiber by the use of optional ComNet SFPs for connector type and distance.

Switching Time: Less than 1 microsecond.  Dwell Time: Each camera individually or globally set from 1 to 64 seconds.  Alarm Dwell Time: 1 s to 64 s.  Alarm Capture Time: 1 s to 63 s.

Bosch LTC 8934/00 is a video output module.

The GE-DS-82-POE provide optimised deployment and safe power management of PoE edge devices such as IP Surveillance cameras, access control panels, wireless access points (WAP) and Voice over IP (VoIP). Full power PoE-af (15.4w) is provided to all 8-ports with no power sharing, and added port circuit protection isolates and prevents power interference between ports.

16 Way Alarm Card for Nortek RS Switchers

NPR250-16M is a remote managed midspan injectors that provides power and pass data to PoE compliant devices, such as IP cameras, door locks, IR illuminators and other access control edge devices. It features 16 ports at 32W/port, remote power management via LAN/WAN, remote PoE shutdown per port or all ports simultaneously, and 10/100/1000 BaseT Gigabit support.

The ComNet™ CNGE28FX4TX24MSPOE+ Layer 2 Managed 28 port ethernet switch supports twenty-four (24) 10/100/1000 Base-TX ports and four (4) 1000Base-FX ports of Ethernet data. Fully compliant with IEEE 802.3at, up to 720 watts of PoE or PoE+ power is available for distribution across all 24 Base-TX ports. The exclusive C-Ring redundant ring feature protects networks from interruptions or temporary malfunctions with its fast recovery technology. Legacy ring allows the switch to be used in an existing ring of ComNet X-Ring enabled switches. eConsole, a powerful, easy-to-use Windows-based utility, allows the CNGE28FX4TX24MSPOE+ to be centrally managed.

8 channels, 2 outputs, 2 alarms, 22, -52, BNC, 440 x 305 x 40, 4 KG, 108 ~ 253 VAC, 15 W, 4 ~ 55, Matrix Switchers, 0 ~ 95

LTC 5141 Series switchers feature automatic sequencing, adjustable dwell time, vertical interval switching, instant homing, camera indicators, and automatic skip.  These units automatically sequence from camera to camera; dwell time is adjustable from 2 to 45 seconds.  Vertical interval switching is provided to reduce picture distortion during automatic sequencing.

UBV-SW541E features remote PoE PD detection as well as complies with IEEE 802.3af PoE standard.

The ComNet™ CNGE3FE7MS2 managed ethernet switch provides robust transmission of (7) 10/100 BASE-TX and (3) 10/100/1000TX or 100/1000FX combo ports, of gigabit Ethernet data. Unlike most Ethernet switches, these environmentally hardened units are designed for direct deployment in difficult out-of-plant or roadside operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media.

The ComNet™ CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package.

The ComNet™ CNGE12MS is a 12-port managed ethernet switch designed to reliably operate in harsh, environmentally challenging applications. It features four (4) 1000BASE-X and eight (8) gigabit combo ports. The eight combo ports are 10/100/1000Mbps configurable for either CAT5-e copper, or multimode or single-mode optical fiber by the use of optional ComNet SFPs. Exclusive to ComNet is C-Ring, a feature that protects the network from interruptions or temporary malfunctions with fast recovery technology.

The ComNet™ CNGE2FE16MS managed Ethernet switch provides robust transmission of (16) 10/100 BASE-TX and (2) 10/100/1000TX or 100/1000FX combo ports, of gigabit Ethernet data. Unlike most Ethernet switches, these environmentally hardened units are designed for direct deployment in difficult out-of-plant or roadside operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media.

The ComNet™ CWGE26FX2TX24MSPOE is an extended temperature commercial grade Managed Ethernet Switch. It provides IEEE 802.3at PoE to twenty-four10/100/1000BASE-T(X) two of which are also gigabit combo ports supporting 100/1000Fx SFP Modules. A further two-100/1000FX SFP* ports are also included.

The ComNet™ CNFE4+1SMSM2 is a five-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100 Mbps and is designed to combine Ethernet data from the four electrical ports into a single optical port and forward that data to the next network device, using two-fiber ST or SC optical connectors.

The ComNet™ CNGE2FE8MSPOE2 is a hardened Managed Ethernet Switch.It provides IEEE 802.3af (15W) PoE to eight 10/100BASE-T(X) ports and has two-gigabit combination SFP or RJ-45 ports. Up to 120 watts of PoE power is available for distribution across all 8 TX ports. All SFP ports utilize ComNet SFP* modules for fiber and connector type and distance. The CNGE2FE8MSPOE2 is a redundant switch offering multiple Ethernet redundancy protocols, C-Ring (recovery time <10ms over 250 units of connection), ComRing, and MSTP/RSTP/ STP (IEEE 802.1 s/w/D).

The ComNet™ CNGE8FX4TX4MS Managed Ethernet Switch provides transmission of (4) 100/1000 BASE-TX and (4) 10/100/1000FX combo ports. Unlike most Ethernet switches, these environmentally hardened units are designed for deployment in difficult operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media. Ports 1 – 4 support the 10/100/1000 Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation.

The ComNet™ CNGE2FE24MS Managed Ethernet Switch provides (24) 10/100 BASE-TX and (2) 10/100/1000T(X) or 1000FX combo ports. The CNGE2FE24MS is environmentally hardened and is designed for deployment in difficult operating environments. It is designed for use with either conventional CAT-5e copper or optical transmission media.

EC10: 10 Port EoC Long Reach PoE+ (30 Watts) Unmanaged Switch with 55VAC, 165 Watt Power Supply - 5 YR warranty included The plug and play EC10 (Ethernet over Coax) unmanaged switch makes the modernization to IP devices (IoT) simple, secure and cost-effective. When paired with the EC Adapters, this powerful enterprise-grade switch delivers fast Ethernet and PoE+ over Coax cable with up to 3,000ft (915m) reach - that’s 10Xs the reach of standard Ethernet switches.

The ComWorx CWFE8TX8MS Managed Ethernet Switch provides transmission of 100 BASE-TX Ethernet data. These units are available for use with conventional CAT-5e copper transmission media. Up to 8 electrical ports are available for easily implementing point-to-point, linear add-drop, drop-and-repeat, star or true selfhealing ring and mesh network system architectures. The electrical ports support the 10/100 Mbps (100 BASE-TX) Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation.

The ComNet™ CNGE2FE8MSPOE+ is a hardened managed Ethernet switch. It provides IEEE 802.3at (30W) PoE+ to eight 10/100BASE-T(X) and has two-gigabit combination SFP or RJ-45 ports. Up to 240 watts of PoE or PoE+ power is available for distribution across all 8 TX ports. All SFP ports utilise ComNet SFP modules for fiber and connector type and distance. The CNGE2FE8MSPOE+ is a redundant switch offering multiple Ethernet redundancy protocols, C-Ring.

The ComNet™ CNFE4+1SMSM2 is a five-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100 Mbps and is designed to combine Ethernet data from the four electrical ports into a single optical port and forward that data to the next network device, using two-fiber ST or SC optical connectors.

FLEX24: 24 Port Long Reach 2 or 4 pair UTP PoE++ (50 Watts) Managed Switch with 110VAC, 500 Watt / 220VAC, 1,000 Watt Power Supply. Meets EN 50121-4 (Railway/Subway) - 1 YR warranty included The FLEX24 managed switch makes the modernization to IP devices (IoT) simple, secure and cost-effective. When paired with the FLEX Adapters, this powerful enterprise-grade switch delivers fast Ethernet and PoE++ over multi-pair UTP cable with up to 2,000ft (610m) reach - that’s 6Xs the reach of standard Ethernet switches. The FLEX24 comes standard with robust power management capabilities and an industry leading, simple to use GUI interface.

The ComNet™ CNGE3FE7MS4 is a substation-rated and industrially hardened fully managed layer 2 gigabit Ethernet switch. Fully compliant with the requirements of IEC 61850-3, IEEE 1613 Class 2, UL 508 Class 1/ Division 2 (Groups A, B, C, & D for hazardous environments), EN50155, and NEMA TS-1/ TS-2, it is designed for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside and roadside electronic equipment, and other difficult out-of-plant applications.

The ComNet™ CNFE8US Series Ethernet 8 port unmanaged switches are designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5e/6 electrical cable. Eight independent 10/100 Mbps channels are integrated in a single package.

MobileView GE-DSH-82 industrial ethernet managed switch is equipped with eight 10/100Mbps Fast Ethernet ports with two GigE uplink TP/SFP combo ports (for drop and insert functionality and for uplinking to a backbone) or eight 10/100Mbps Fast Ethernet ports with two GigE uplink TP/SFP Combo ports. It is a fully managed Layer 2+ switch providing a robust industrial hardened design that provides for rapid operational recovery in the event of a network or power system failure.

The ComNet™ CNFE4SMS is a four-port switch with uplink management functionality and provides 4 Ethernet ports operating at 10/100 Mbps and is designed to combine three electrical ports into an electrical port that forwards this data to the next network device, There is no programming required to use this product. The ComNet CNFE4SMS comes pre-programmed, preventing network video flooding with DIP switch selection of port 4 as uplink or as an unmanaged switch.

The ComNet™ CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package.

The ComNet™ CNFE8US Series Ethernet 8 port unmanaged switches are designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5e/6 electrical cable. Eight independent 10/100 Mbps channels are integrated in a single package.

The ComWorx™ CWFE8MS/DIN Managed Ethernet Switch provides transmission of 10/100 BASE-T Ethernet data. These units are available for use with conventional CAT-5e copper transmission media. Up to 8 electrical ports for easily implementing point-to-point, linear adddrop, drop-and-repeat, star or true self-healing ring and mesh network system architectures.

The ComNet™ CNFE8US Series Ethernet 8 port unmanaged switches are designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5e/6 electrical cable. Eight independent 10/100 Mbps channels are integrated in a single package.

The ComNet™ CNFE5SMS is a five-port self-managed Ethernet switch with uplink management functionality. It provides 5 ports operating at 10/100 Mbps and is designed to combine Ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device. There is no programming required to use this switch. The ComNet CNFE5SMS comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. It is “Plug-and-Play” easy to use.

The comnet™CNFe5SMspoe is a five-port self-managed ethernet switch with uplink management functionality.  It provides 5 ports operating at 10/100Mbs and is designed to combine ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device.

PoLRE LPC: 8 Port Long Reach single pair UTP PoE (15 Watts) Unmanaged Switch with 55VAC, 110 Watt Power Supply, 2 Phylink adapters - 5 YR warranty included The plug and play PoLRE LPC unmanaged switch makes the modernization to IP devices (IoT) simple, secure and cost-effective. When paired with the PhyLink Adapter, this powerful enterprise-grade switch delivers fast Ethernet and PoE over single-pair UTP cable with up to 1,200ft (365m) reach - that’s 4Xs the reach of standard Ethernet switches.

EC-Base: Long Reach PoE++ extender for EoC when paired with EC-Link+ (50 Watts) or EC-Link (30 Watts); local power option. Meets EN 50121-4 (Railway/Subway) - single unit - 5 YR warranty included The NVT Phybridge EC-Base Extender Solution, when used with the CLEER Family Adapters, is designed to supercharge the downlink ports of a standard Ethernet switch, delivering 10/100Mbps symmetrical (full duplex) and PoE over Coax infrastructure with distances up to 6,000ft (1,830m). That’s 18X the reach of standard Ethernet switches.