CCTV Fiber Optic Transmitters & Telemetry  (354)

One (1) Channel Balun Real-time Transmission over UTP CAT5E/6 Cable Compatible with HDCVI, TVI, AHD, and CVBS Video Formats Transmission Distance at 4K: 200 m (656 ft) External Power Supply not Required

Integrated 5 GHz (2x2) MIMO radio Frequency 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz) High performance and stability IP-66 standards rated enclosure Improved noise immunity TDMA ensures reliable communication Powerful OS Dual firmware Built-in tools including Site Survey, Link Test, Antenna Alignment, Spectrum Analyzer, Ping & Trace help in configuration and debugging Recommended for 0~3km PTP/PTMP wireless connection(as a station in PTMP link)

Integrated 5 GHz (2x2) MIMO radio Frequency 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz) High performance and stability IP-66 standards rated enclosure Improved noise immunity TDMA ensures reliable communication Powerful OS Dual firmware Built-in tools including Site Survey, Link Test, Antenna Alignment, Spectrum Analyzer, Ping & Trace help in configuration and debugging Recommended for 0~5km PTP/PTMP wireless connection(as a station in PTMP link)

Integrated 5 GHz (2x2) MIMO radio Frequency 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz) High performance and stability IP-66 standards rated enclosure Improved noise immunity TDMA ensures reliable communication Powerful OS Dual firmware Built-in tools including Site Survey, Link Test, Antenna Alignment, Spectrum Analyzer, Ping & Trace help in configuration and debugging Recommended for 0~5km PTP/PTMP wireless connection(as a station in PTMP link)

Vivotek SFP-1000-SM13-10 is an SFP transceiver module with a centre wave length of 850 nm and VCSEL laser type.

Vivotek SFP-1000-MM13-02 is an SFP transceiver module with a centre wave length of 850 nm and VCSEL laser type.

Vivotek SFP-1000-SM13-40I is an industrial SFP transceiver module with a centre wave length of 1310 nm and Febry-Perot laser type.

Vivotek SFP-1000-SM13-10I is an industrial SFP transceiver module with a centre wave length of 1310 nm and Febry-Perot laser type.

Vivotek SFP-1000-MM85-X5 is an SFP Transceiver module with a centre wave length of 850 nm and VCSEL laser type.

Vivotek SFP-1000-MM85-X5 is an SFP transceiver module with a centre wave length of 1310 nm and Febry-Perot laser type.

Vivotek SFP-1000-MM85-X5I is an industrial SFP transceiver module with a centre wave length of 850 nm and VCSEL laser type.

Vivotek SFP-1000-MM13-02I is an industrial SFP transceiver module with a centre wave length of 1310 nm and Febry-Perot laser type.

The VIVOTEK SFP-1000-CPTX-X1 gigabit SFP to RJ45 transceiver has a data rate gigabit of 1.25G. The SFP type transreceiver supports Auto-Negotiation and Auto-MDI/MDI-X, along with being MSA Compliant.

The VIVOTEK SFP-2000-SM13-10 10G SFP transceiver has certifications such as IEC 825,EN 60825-1,FDA 21 CFR 1040.10 and 1040.11 and is MSA compliant.

Designed to work exclusively with Videotec products and accessories 1 SFP port, MSA compliant, Fast Ethernet (100BASE-FX), for fiber optic connection (splice tray included in the product) 3 RJ45 ports, Fast Ethernet (10BASE-T/100BASE-T) 2 bypass for analog video signals with BNC connectors and 2 bypass for I / O signals with multi-pin connectors Extended/Industrial range electronics

Certifications for use in Zones 1 and 2 IIC Group (Gas) and in Zones 21 and 22 IIIC Group (Dust); Ambient temperature up to +80°C (+176°F) AISI 316L stainless steel construction Designed to work exclusively with Videotec products and accessories 3 RJ45 ports, Fast Ethernet (10BASE-T/100BASE-T) 1 SFP port, Fast Ethernet (100BASE-FX), for fiber optic connection

Certifications for use in Zones 1 and 2, IIC T5 or T6 Group (Gas) and in Zones 21 and 22, IIIC T100°C or T85°C Group (Dust) Copper-free marine grade aluminium construction, RAL 9006 external epoxy paint Designed to work exclusively with Videotec products and accessories Plenty of space for cables and connections 3 RJ45 ports, Fast Ethernet (10BASE-T/100BASE-T) 1 SFP port, Fast Ethernet (100BASE-FX), for fiber optic connection

A small form-factor pluggable (SFP) transceiver that supplies network devices, such as a switches or routers, with a fibre optic network connection Industrial grade with a wide temperature range Includes link-loss that enable network redundancy Complying with SFP Multisource Agreement (MSA), it is easy to install into compliant ports at any time without interrupting the online operation of the host equipment Short wavelength (850 nm) VCSEL laser diodes enable data transmission up to 550 m on a multimode 50/125 μm optical fibre

A small form-factor pluggable (SFP) transceiver that supplies network devices, such as a switches or routers, with a fibre optic network connection Long wavelength (1,310 nm) FP laser diodes enable data transmission up to 10 km on a single-mode 9/125 μm optical fibre Link-loss feature Industrial grade – extended temperature range Complies with SFP MSA

A small form-factor pluggable (SFP) transceiver that supplies network devices, such as a switches or routers, with a network connection Up to 100 m link length Link-loss feature Industrial grade – extended temperature range Integrated RJ-45 connector Complies with SFP MSA and IEEE802.3

Pelco FSFP-AFMM1SC2 is a small form-factor pluggable transceivers that allow for an optical or copper interface when using a Pelco unmanaged switch or media converter. These interchangeable FSFP transceivers are available for use with unshielded tw isted pair (UTP) cabl e, multimode optical fiber, or single-mode optical fiber.

IDIS DA-BE1101 is a UTP exchanger for EoC Transceiver that supports plug and play without setting up special IP addresses.

Up to 10 km on 9/125μm SMF Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint 1310nm Fabry-Perot laser transmitter Compatibility with DH Series and DA-MC1101

Up to 500m on 50/125μm MMF, 300m on 62.5/125μm MMF Up to 2.125 Gb/s bi-directional data links Hot-pluggable SFP footprint 850nm Oxide VCSEL laser transmitter Compatibility with DH Series and DA-MC1101

Up to 500meters PoE transmission between devices using UTP cabling Up to 700meters DATA transmission between equipments using UTP cabling Plug-and-play without any required PC setting Supports 1Gbps / IEEE802.3at for PoE Injector Supports 1Gbps / IEEE802.3at / 100meters for PoE Repeater Supports 10 / 100Mbps for Long Reach PoE extender

Makes it possible to install Full HD network cameras using existing coaxial cables Two-way communication allows use of the product as a transmitter or a receiver  Supports PoE (IEEE 802.3af, IEEE 802.3at) Supports plug and play without setting up special IP addresses Supports Data transfer up to 600m

IDIS DA-EC1101T is an ethernet over coax transceiver that makes it possible to install Full HD network cameras using existing coaxial cables.

Makes it possible to install Full HD network cameras using existing coaxial cables Two-way communication allows use of the product as a transmitter or a receiver Supports PoE (IEEE 802.3af, IEEE 802.3at) Supports plug and play without setting up special IP addresses Supports Data transfer up to 600m

Up to 500meters PoE transmission between devices using UTP cabling Up to 700meters DATA transmission between equipments using UTP cabling Plug-and-play without any required PC setting Supports 1Gbps / IEEE802.3at for PoE Injector Supports 1Gbps / IEEE802.3at / 100meters for PoE Repeater Supports 10 / 100Mbps for Long Reach PoE extender

IDIS DA-EC1101R is an ethernet over coax transceiver that makes it possible to install Full HD network cameras using existing coaxial cables.

Compatible with IEEE 802.3af Supports Data transfer up to 130m distance A maximum distance of 490m can be achieved between the NVR and Camera via three DA-PR1101 ethernet extenders Supports PoE switch off function via PoE On/Off switch Supports plug and play without setting up special IP addresses

IDIS DA-PI1101 is a 1 channel single port PoE injector that protects low power devices to receive only the power they need.

IDIS DA-MC1101 is a gigabit fiber media converter that supports LED status indicators and automatic negotiation.

Teleste CPT101 standalone transmitter is temperature hardened and as a new feature is capable of using both 12 V DC or 24 V AC supply voltage. It offers single channel composite video transmission over one multimode fibre.

The first DOCSIS 3.1 node The ACE8 fully meets requirements for DOCSIS 3.1 and DVB-C2. Downstream frequency band is reaching up to 1.2 GHz which ensures fulfilment of all future bandwidth needs. Upstream is flexible and it can be easily updated to 200 MHz.  The node is based on fixed receiver and modular US transmitter, and it uses high performance GaN hybrid in output amplifier. This makes its output ranges especially wide and results in enhanced noise resilience. Sleek, yet robust The ACE8 is a small, user-friendly node with intelligent features. With compact size and sleek housing the node is easily and effortlessly fit in European style street cabins. The advanced fibre organiser provides convenient location for fibre pigtails and protects the fibres against damage. Connectors and adapters are held in place in the fibre tray by universal type holders the ensure compatibility with variety of existing connectors and adapters. Wireless configuration The ACE8 can be controlled via an intuitive touch screen user interface for tablets. Remote connectivity is also possible via third-party applications through SNMP.  Included USB and wireless Bluetooth® connectivity makes the node easily configurable even on the site. Intelligent in operations The ACE8 is part of Teleste’s intelligent networks concept that aims at reducing network operating costs while securing high service quality. The node is equipped with an intelligent transponder which enables advanced management features such as automatic adjustment and configuration. The ACE8 also has automatic ingress control to guarantee the quality of upstream signal. The intelligent features significantly reduce need for manual maintenance, and help cut down service outages.

Supports up to 128 wireless zones and 32 wireless keys – varies per panel Supports DSC PowerG devices Compatible with PowerG Repeater (PG9920) for range extension All wireless detectors are fully supervised for communication integrity

Teleste CRR101 is a CFO card for triple channel video transmitter as well as for single and triple channel receiver operation. The Card format is applicable for both rack mount and stand-alone installations.

Teleste CFO432 4 channel video link is used in point-to-point fibre optic transmission systems. The optical operation on CFO432 is based on multimode fibre operation over 2 fibres (TX and RX separated). CFO432 supports multiple serial data needs such as e.g. PTZ and access control. The dual audio channels are suitable for any PA needs but are fit for broadcast purposes as well. It is temperature hardened and well-suited for industrial and high-end security monitoring systems. Stand-alone units mounted into CMA adaptors can be equipped with optional CLP line protectors providing a surge/transient protection as well a common mode interference filtering.

Teleste CRT103 is a CFO card for triple channel video transmitter as well as for single and triple channel receiver operation. The Card format is applicable for both rack mount and stand-alone installations.

RS422/485