CCTV Fiber Optic Transmitters & Telemetry  (354)

ComNet FVT/FVR20D2I1C4E transmitter/receiver provides transmission of two independent video channels and two bi-directional data channels. It also provides transmission of one Aiphone™ intercom channel and four contact closure channels with tamper supervision in addition to one 10/100Mbps Ethernet channel. The FVT/FVR20D2I1C4E has dual SFP optical ports to provide a redundant point-to-point fail safe topology in the event of loss of one fibre or one optical module.

The ComNet™ FVT81M1 and FVR81M1 multiplexers simultaneously transmit eight channels of video over one optical fiber utilizing state-of-the-art digital encoding and decoding for high-quality video transmission. These environmentally hardened units are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

22 x 25 x 54, 30, -5 ~ +55, IP20

ComNet FVT1031M1 video transmitter/data transceiver supports simultaneous transmission of short-haul quality 10-bit digital video, bi-directional data and up-the-coax data over one multimode optical fibre. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces, and most major data protocols as well as up-the-coax data. The FVT1031M1 allows the user to choose bi-directional data or up-the-coax data through a switch on the unit.

The ComNet™ FVT/FVR801 video transmitter and video receiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of eight independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-ofplant installations.

ComNet FVT/FVR10D1A2C1(M)(S)1 video transmitter/ receiver and data transceiver utilise 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. This environmentally hardened unit provides transmission of one independent video channel and one bi-directional data channel over one optical fibre and is ideal for use in unconditioned roadside or out-of-plant installations. It also provides transmission of two bi-directional audio signals and one bi-directional contact closure over the same fibre.

Receiver Type, 1 channels

The ComNet™ FVT/FVR41 multiplexer simultaneously transmits four channels of video over one optical fiber utilising state-of-the-art digital encoding and decoding for high-quality video transmission

The FVR11M utilizes Automatic Gain Control (AGC) and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.

ComNet FVT/FVR40D2I1C4E environmentally hardened unit provides transmission of four independent video channels and two bi-directional data channels. It also provides transmission of one Aiphone™ intercom channel and four contact closure channels with tamper supervision in addition to one 10/100Mbps Ethernet channel.

IFS MC201-1P/1FS is a fiber (SM) to ethernet media converter w/PoE injector that provide a cost-effective solution for deploying remote PoE powered edge devices with optical fiber.

The ComNet™ FVT/FVR200S1 video transmitter and video receiver utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of 20 independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems.

The ComNet™ FVT/FVR160 series video transmitter and video receiver utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of 16 independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems.

Receiver Type, 3 channels

Transmitter Type, 2 channels

ComNet FVT/FVR4012(M,S)1 transmitter/receiver transmits four channels of video utilising state of the art 10-bit digital encoding and decoding for very high quality video transmission, along with two channels of bi-directional data and one bi-directional contact closure over one single mode or multimode optical fibre. The equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. It is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional rs232, 422 and 485 (2 & 4 Wire) data.

Transmitter Type, 3 channels

Receiver Type, 3 channels

Receiver Type, 1 channels

Transmitter Type, 3 channels

Transmitter Type, 2 channels

The ComNet™ COMPAKFE2SCM2 Ethernet media converters are designed to transmit and receive 10/100 Mbps data over two multimode optical fibers. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments.

ComNet FVT110M1/M mini video transmitter/data transceiver supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally encoded video and bi-directional data over one multimode mode optical fibre. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols.

The ComNet™ FVT/FVR81 video transmitter and video receiver series utilizing state of the art digital encoding and decoding for high-quality video transmission.

ComNet FVT/FVR2014(M)(S)1 video transmitter/receiver and data transceiver utilises 10-bit digital encoding and decoding for high quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. The environmentally hardened unit provides transmission of two independent video channels and four bi-directional data channels over one optical fibre and is ideal for use in unconditioned roadside or out-of-plant installations. This unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support.

ComNet FVT1D1M1 is a digitally encoded video transmitter with bi-directional data and simplex contact closure. The voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events. It has automatic resettable fuses on all power lines.

ComNet FVT15M2 video and data transreciver supports RS232 or RS422 data interfaces. The bi-colour (Red/Green) LED status indicators provide rapid indication of critical operating parameters. The voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.

The ComNet™ FDX72(M,S)1 series Drop-Insert-Repeat Transceiver unit is a fully-digital modem designed for implementing RS 232, RS 422 or RS 485 2 or 4-wire data communications networks of the highest possible reliability. A network of FDX72 units can support one full-duplex or two half-duplex data channels. These transceivers also feature data translation to convert between data protocols. Data re-clocking and regeneration permit an almost unlimited number of transceiver/controller units to be used within the network.

Transmitter Type, Receiver Type, 135 x 87 x 32, 437, -10 ~ 60, 0 ~ 90, 12 ~ 48 V DC, 9.1 W

Transmitter Type, Receiver Type, 250, -40 ~ +75, 95, 13.5 VDC

ComNet FVT/FVR320S1 video transmitter and receiver exceeds all requirements for EIA RS-250C short-haul transmission. The voltage transient protection on all power and signal input/outpt lines provides unconditional protection from power surges and other voltage transient events. In addition, the bi-colour (Red/Green) LED status indicators provide rapid indication of critical operating parameters.

ComNet FVT10D2I1C4E environmentally hardened unit provides transmission of one independent video channel and two bi-directional data channels. It also provides transmission of one Aiphone™ intercom channel and four contact closure channels with tamper supervision in addition to one 10/100Mbps Ethernet channel.

ComNet FVT1021M1 video transmitter/data transceiver supports the simultaneous transmission of short-haul quality 10-bit digital video and return data over one multimode optical fibre. This module is universally compatible with major CCTV camera manufacturers and supports RS-232 and RS-422 data interfaces. The FVT1021M1 allows the user to set the data through a switch on the unit.

ComNet FVTDR101B video transmitter/data receiver for the Bosch dome camera system supports the simultaneous transmission of video in one direction and pan tilt and zoom control signals in the reverse direction. The FVTDR101B supports RS-232 and RS-422 data signals from the receiver to the transmitter and outputs RS-422 data into the Bosch dome.

ComNet FVT1014M1 video transmitter/data transceiver utilises 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. The environmentally hardened unit provides transmission of one independent video channel and four bi-directional data channels over one optical fibre and is ideal for use in unconditioned roadside or out-of-plant installations. This unit is completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support.

The ComNet™ COMPAK4VB Video and Contact Closure Receiver unit supports four independent channels of video and four independent dry contact closures over four separate optical fibers.Compatible with all NTSC, PAL, or SECAM CCTV camera systems.

The ComNet™ FDX60(M)(S)(-M) data transceivers provide point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one or two optical fibers. The transceivers are transparent to data encoding allowing for broad-range compatibility. Models within this series are available for use with multimode or single mode optical fiber.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

ComNet FVT/FVR40A4(M)(S)1 video/audio multiplexer utilises 10-bit video encoding for true EIA/TIA RS-250C Short-Haul broadcast quality transmission, and 24-bit encoding at a 96 Khz sampling rate for the highest possible audio fidelity. Digitally encoded transmission ensures that the video and audio performance remain completely unaffected up to the maximum usable optical transmission distance or optical path loss.

ComNet FVT1D1M1/M is a digitally encoded video transmitter with bi-directional data and simplex contact closure. The voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events. It has automatic resettable fuses on all power lines.