CCTV Fiber Optic Transmitters & Telemetry  (354)

AMG4783R is a singlemode fiber standalone, with 8 channel.

IFS D19110SHR multi-mode full duplex data transceiver is designed for implementing traffic signalisation/communications data networks of the highest possible reliability. The unit features simple “Y” electrical cable that provides data interconnect between primary and alternate-master transceiver units. The module is available in either stand-alone or rack mount versions.

IFS MC252-1P-1CX is a power over coax PoE at media converter that consists of a transmitter and receiver set, which works as a pair with or without a power adaptor depending on the installation confi guration and power requirements needed.

Transmitter Type, Receiver Type, 16 channels, 237 x 161 x 29, 580, -40 ~ +75, 0 ~ 95, 13.5 VDC, 4 W

AMG4643 is a singlemode fiber standalone, with 4 channel.

AMG4684 is a singlemode fiber standalone, with 8 channel.

AMG4744R is a singlemode fiber standalone, with 4channel.

AMG4743R is a singlemode fiber standalone, with 4channel.

AMG4782R is a singlemode fiber standalone, with 8 channel.

AMG4784R is a singlemode fiber standalone, with 8 channel.

AMG4683 is a singlemode fiber standalone, with 8 channel.

AMG4781R is a singlemode fiber standalone, with 8 channel.

AMG4743 is a singlemode fiber standalone, with 4 channel.

AMG4781 is a singlemode fiber standalone, with 8 channel.

Data Transceiver, Receiver Type, 1 fibres, 5 ~ 6.5 MHz bandwidth, 178 x 125 x 51, 900, -40 ~ +74 , 0 ~ 95, 24 V AC, 300 mA

AMG4741R is a singlemode fiber standalone, with 4channel.

AMG4744 is a singlemode fiber standalone, with 4 channel.

AMG4782 is a singlemode fiber standalone, with 8 channel.

IFS VT9930WDM video transmitter/data transceiver utilises frequency modulation for high video quality that meets the requirements of EIA RS-250C. This environmentally hardened unit provides the simultaneous transmission of video and full-duplex data over one single mode optical fibre.

eBridge100RMT Ethernet over Coax/CAT5e Adapter Kits transmit full duplex data at 100Mbps and pass PoE compliant power over coax 304m, or CAT5e cable up to 500m without repeaters. The adapter kit consists of an eBridge100RM receiver and an eBridge100TM transceiver. These adapters, along with the connected IP camera or edge device, is powered by virtually any midspan or endspan. Remote management functions such as edge device reset, monitoring real-time current draw and port status are possible when coupled with an Altronix NetWay8M/16M Midspan. eBridge100RMT is compatible with Megapixel, HD720, HD1080 and VGA cameras.

The AMG4600 series are designed for low cost, multichannel point-to-point video transmission together with associated Ethernet and low speed data and audio signals. The AMG4600 series is designed for multimode fibre. The system can provide a highly resilient, managed, low cost, transmission system for both compressed and uncompressed video signals.

AMG4643R is a multimode fibre rack.

Transmitter Type, 135 x 88 x 50, -40 ~ +75, 0 ~ 90, 24 ~ 48 V DC, 66.4 W

Bosch CNFE2MC/IN is a media converter device designed to transmit and receive 10/100 Mbps Ethernet data over optical fibre using SFP modules. This head-end device is supplied in an enclosure that can be surface mounted or rack mounted using the optional C1-IN rack mount card cage. The unit does not require infield adjustments, and provides automatic MDI/MDI-X crossover.

Video Only, Receiver Type, 1 fibres, 10 MHz MHz bandwidth, 107 x 89 x 25, 900, -40 ~ +74 , 0 ~ 95, 10 ~ 12 V DC, 150 mA

Video Telemetry Transmission, Receiver Type, 110 x 172 x 35, 500, -40 ~ +74, 0 ~ 95, 12 V DC ~ 24 V AC, 3.5 W

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

Video Only, Video Telemetry Transmission, 1 channels, 10 Hz ~ 8 MHz MHz bandwidth, 340, -40 ~ +75 , 0 ~ 95, 13.5V DC, 4.2

Video Only, Video Telemetry Transmission, 1 channels, 7.5 MHz bandwidth, 270, -40 ~ +75, 0 ~ 95, 13.5 VDC, 6 W

Transmitter Type, Receiver Type, 1 fibres, 1 channels, 5 ~ 10 MHz bandwidth, 178 x 125 x 25, 900, -40 ~ +74 , 0 ~ 95, 21 ~ 24 V AC, 150 mA

The AMG4600 series are designed for low cost, multichannel point-to-point video transmission together with associated Ethernet and low speed data and audio signals. The AMG4600 series is designed for multimode fibre. The system can provide a highly resilient, managed, low cost, transmission system for both compressed and uncompressed video signals.

IFS MC250-4T/1FM ethernet media converter offers four 10/100Mbps Ethernet ports and 100Base-FX transmission on either multi-mode optical fibre for optimum bandwidth usage. Specifically designed for stable and reliable operation in electrically harsh and climatically demanding environments, the module’s slim, IP-30 standard metal case accommodates DIN-rail or wall mounting for efficient installation in multiple applications.

IFS MC350-4T-2S 4-port industrial media converter is designed for the most demanding IP network applications offering the flexibility of SFP technology and wide operating temperature range. It converts 10/100/1000Base-T Ethernet on copper to 100Base-X or 1000Base-X fi ber via Small Form-factor Pluggable (SFP) technology.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

Data Transceiver, 2 fibres, 178 x 122 x 25, 900, -40 ~ +74 , 0 ~ 95, 24 V AC, 250 mA

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

Video Telemetry Transmission, Receiver Type, 110 x 172 x 35, 500, -40 ~ +74, 0 ~ 95, 12 ~ 24 VDC, 3W