CCTV Fiber Optic Transmitters & Telemetry  (354)

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

The ComNet™ FDW1000 data extenders provide optical connectivity between one card reader and its associated door or gate locking hardware, to any Wiegand, MagStripe, or F/2Fbased control panel. The connection is completely supervised and secure, and a pair of these units will support a single locking gate or door and its associated reader using two multimode or singlemode optical fibers. When used with the ComNet EXP- 100 Expansion Module, up to 7 gates or doors and readers may be integrated onto the same network.

eBridge100STR is a versatile solution Ethernet adapter/media converter kit which transmits data at 100Mbps full duplex and power over Coax cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They provide a simple way to replace legacy analog products with new IP devices over existing coax.

When used with the FDW1000 series of fiber optic Wiegand extender modules, the ComNet™ EXP100 Expansion Module enables additional Wiegand-based devices to be added to the network. The 2-wire RS-485 data interface between the expansion modules provides a secure connection, with excellent immunity to electrical noise and interference.

IFS D1230 single mode data transceiver provides point-to-point transmission of simplex or duplex T1, E1 (CCITT) data signals over two optical fibres. The module is available in either stand-alone or rack mount versions.

Transmitter Type, 135 x 88 x 32, 495, -40 ~ +75, 0 ~ 90, 24 ~ 48 V DC , 56.4 W

Transmitter Type, 1 channels, 20 Hz ~ 20 kHz MHz bandwidth, 320, -40 ~ +75, 0 ~ 95, 13.5 VDC, 6.75 W

Data Transceiver, 4 fibres, 178 x 125 x 25, -40 ~ +74 , 0 ~ 95, 12 V DC , 250 mA

eBridge1PCRMT is a single port EoC Receiver and hardened Transceiver kit that transmits data and passes power over coax cable. eBridge1PCRM receiver is powered by a PoE midspan or endspan product, such as a NetWay8M and NetWay16M and sends its power over the coax to the eBridge1PCTX tranceiver under PoE protocol. This enables the eBridge1PCRM to be used in a managed manner, allowing for remote camera reset. The transceiver in turn delivers that PoE compliant power to an edge device/camera. This plug and play unit facilitates system upgrades from analog to IP utilizing existing legacy Coax and eliminates the costs and labor associated with installing new network cabling. Data transmission and power over the Coax is possible up to 500m in comparison to 100m Ethernet distance (CAT5e). A maximum range from headend to the edge device/camera is 700m, taking into consideration that up to 100m of structured cable may be deployed from the receiver to the network switch and the transceiver to the edge device/camera.

Altronix eBridge4SK kit consists of eBridge100SPR and eBridge4SPT Coax to CAT-5 Ethernet adapters/media converters that deliver data and power over coax cable. The paired set enables fast 10/100 Base-T Ethernet digital communication. eBridge4SPT allows to upgrade the existing infrastructure by replacing a single analog device with up to four (4) PoE/PoE+ devices. eBridge100SPR passes data and sends power over the coax to the eBridge4SPT. Data transmission and power over the Coax are possible up to 300m. Maximum range from headend to the PoE camera/device is 500m, taking into consideration that up to 100m of structured cable may be deployed at each end. eBridge4SK enables cost-effective system upgrades and eliminates the costs and labor associated with installing new network cabling.

Video Telemetry Transmission, Receiver Type, 2 channels, 1310 / 1550 nm, 110 x 172 x 35, 500, -40 ~ +74, 0 ~ 95, 12 ~ 24 VDC, 3W

Data Transceiver, 2 fibres, 107 x 89 x 25, 900, -40 ~ +74 , 0 ~ 95, 12 V DC, 150 mA

Data Transceiver, 4 fibres, 102 x 76 x 25, 900, -40 ~ +74 , 0 ~ 95, 12 V DC, 200 mA

Data Transceiver, 1 fibres, 254 x 158 x 232, 740, -40 ~ +75, 0 ~ 95, 12 V DC, 500 mA

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre. The products come in a variety of channel options in both standalone and rackmount formats to ensure maximum system versatility. Dual optical redundant options are also available.

IFS D9110E data transceiver consists of fully-digital transceiver units designed for implementing point-to-point or star traffic signalization/communications data networks. It features solid-state current limiters on all power lines to provide equipment protection.

Video Only, 127 x 122 x 38, 340, -40 ~ +75, 0 ~ 95, 13.5 VDC, 3 W

The eBridge1CRT - IP over Coax transceiver and receiver kit is designed to enable fast 10/100Base-T Ethernet digital communication over coax cable. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission is extended up to 610m (over five times the 100m Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit Composite Video Signal with Ethernet data simultaneously.

Altronix eBridge1STR ethernet over coax adapter kit transmits data at 25Mbps and power over Coax cable in a PoE+ compliant format. The eBridge1PCRM is powered by an external midspan or endspan. The eBridge1PCRM receiver passes PoE/PoE+ power over the same coax cable to the eBridge1ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 500m.

Data Transceiver, 1 fibres, 254 x 158 x 232, 740, -40 ~ +75, 0 ~ 95, 12 V DC, 500 mA

IFS D9110 data transceiver is designed for implementing simplex or full-duplex RS-232 drop-and-repeat poll-and-respond traffic signalisation/communications data networks utilizing two optical fibres. This environmentally-hardened unit is ideal for use in unconditioned out-of-plant or roadside installations.

MobileView MSS-MISC-MRT mobile radio transmitter operates on a wide variety of licensed and license-free frequency bands. It combines WiMAX and Wi-Fi radio technologies into one ruggedized, vehicle-mounted device. The 802.16 WiMAX segment provides a network interface with MobileView base stations installed in depots, stations and along highways. This connectivity offers the option to link the vehicle to a MobileView network while at facilities and while the vehicle is in service. The 802.11 Wi-Fi AP can be configured to provide Internet connectivity to passengers, network connectivity for employees, and access to vehicle-mounted DVR cameras in emergency situations.

The AMG4600 series is designed for multimode fibre. The system can provide a highly resilient, managed, low cost, transmission system for both compressed and uncompressed video signals. It allows the user to pick and choose the best from all technologies both now and in the future, by making sure the system can cater for all the future needs from the outset.

IFS MCR-R15 is a MCR series media converter chassis that offers a low-profile (2.4U) design for efficient, high-density media converter installation in a standard EIA 19" rack.

IFS MC350-1T-2S is a gigabit ethernet to 2-port SFP industrial media converter that is designed for the most demanding IP network applications offering the flexibility of SFP technology and wide operating temperature range.

The VDS1004 model provides for the simultaneous transmission of 4 audio signals over one multimode or single mode optical fiber. The modules are available in either stand-alone or rack mount versions.

26 x 70 x 97, 200, 0 ~ 50, 0 ~ 90, 48 V DC

IFS MC251-4P/1S ethernet media converter offers four 10/100Mbps Ethernet ports and 100Base-FX transmission on either multi-mode or single mode optical utilizing SFP technology. Specifically designed for stable and reliable operation in electrically harsh and climatically demanding environments, the module’s slim, IP-30 standard metal case accommodates DIN-rail or wall mounting for efficient installation in multiple applications.

The VDS3616-T/R model provides for the transmission of 1 channel one-way HDSDI over one multimode or single mode optical fiber.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre.

IFS MCR200-1T/1CX ethernet over coax media converter combines two well-proven technologies, Ethernet and VDSL2, providing solution for utilising an existing coax cable infrastructure when migrating from analogue to an Ethernet/IP system. The one box design allows for easy set-up as either a client-side (CPE) or central-side (CO) operating device.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre. The products come in a variety of channel options in both standalone and rackmount formats to ensure maximum system versatility. Dual optical redundant options are also available.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre. The products come in a variety of channel options in both standalone and rackmount formats to ensure maximum system versatility. Dual optical redundant options are also available.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre. The products come in a variety of channel options in both standalone and rackmount formats to ensure maximum system versatility. Dual optical redundant options are also available.

eBridge1PCRX and eBridge1PCTX are CAT5 to Coax cable Ethernet adapters/media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 10/100 Base-T Ethernet digital communication to be transmitted over Coax cable. eBridge1PCRX receiver sends power over the coax to eBridge1PCTX transmitter under PoE protocol. eBridge1PCTX, in turn, delivers that PoE+ compliant power to a PoE-enabled camera or IP device. eBridge1PCRX will not deliver power to non-compliant devices, thus avoiding accidental power turn into improperly connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission over the Coax is possible up to 500m in comparison to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3). A maximum range from headend to the PoE camera/device is 700m taking into consideration that up to 100m of structured cable may be deployed at each end.

eBridge1PCR and eBridge1PCT are CAT5 to Coax cable Ethernet adapters that deliver data and power over the coax cable in a PoE compliant format. The paired set enables fast 10/100Base-T Ethernet digital communication to be transmitted over Coax cable. An eBridge1PCR receiver sends power over the coax to the eBridge1PCT transmitter under PoE protocol. The eBridge1PCT in turn delivers that PoE compliant power to a PoE enabled camera or IP device. eBridge1PCR will not deliver power to non-compliant devices, thus avoiding damage to improperly connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 500m in comparison to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3). A maximum range from headend to the PoE camera/device is 700m, taking into consideration that up to 100m of structured cable may be deployed at each end.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre. The products come in a variety of channel options in both standalone and rackmount formats to ensure maximum system versatility. Dual optical redundant options are also available.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre. The products come in a variety of channel options in both standalone and rackmount formats to ensure maximum system versatility. Dual optical redundant options are also available.