CCTV Fiber Optic Transmitters & Telemetry  (354)

The ComNet™ FDX50M2 and FDX51M2 data transceivers are interchangeable by application and provide point-to-point transmission of simplex or duplex EIA RS232/RS422 data signals over two multimode optical fibers. The transceivers are transparent to data encoding allowing for broadrange compatibility. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.

IFS VT4930WDM video transmitter / data transceiver utilises frequency modulation for high video transmission quality. This environmentally hardened unit provides the simultaneous transmission of video and full-duplex data over one single mode optical fibre.

ComNet FVT1031M1-P video transmitter/data transceiver supports simultaneous broadcast-quality video transmission of 10-bit digitally encoded video and return RS422 or Extended Distance Coaxitron data over one multimode optical fibre.

ComNet FVTVCNDM mini video transmitter/data transceiver supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally encoded video and bi-directional data over one multimode optical fibre.

ComNet FVT107M1 video transmitter/data transceiver provides 10-bit digital video, 10 Mhz bandwidth, short haul video quality, one bi-directional data channel and a dual optical port redundant Point-to-Point topology plus eight contact closures and two alarm relays. The redundant Point-to-Point topology using the dual optical ports provide fail safe operation in the event of loss of one fibre.

ComNet FVT10D1EMM mini video transmitter/data transceiver supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digital video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols.

ComNet FVTRDM1A video transmitter/data transceiver supports simultaneous transmission of short-haul quality 10-bit bi-directional digital video or video sync plus bi-directional data over one multimode optical fibre. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces, and most major data protocols.

ComNet FVT414M1 video transmitter/data transceiver utilises digital encoding and decoding for high-quality video transmission. This environmentally hardened unit provides transmission of four independent video channels and four bi-directional data channels over one optical fibre and is ideal for use in unconditioned roadside or out-of-plant installations. The unit is are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support.

ComNet FVT/FVR280S1is a 28 channel digital video 10-bit digital/short-haul video transmitter and receiver. It is compatible with all NTSC, PAL, or SECAM CCTV camera systems. Additionally, Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

The AMG4600 series are designed for low cost, multichannel point-to-point video transmission together with associated Ethernet and low speed data and audio signals. The AMG4600 series is designed for multimode fibre. The system can provide a highly resilient, managed, low cost, transmission system for both compressed and uncompressed video signals.

A multi-mode fibre (MMF) optic module with duplex LC connector Provides fast Ethernet optical interface for the VG4-SFPSCKT and the CNFE2MC/IN media converter Pluggable design Transmits longer than 2 km (1.2 miles) at 10/100 Mbps Wavelength (transmit/receive) - 1310nm/1310nm

Ethernet media converter video transmitter/data receiver fibre optic kit for AUTODOME cameras, for MIC-IP-PSU for MIC analogue cameras and for the Surveillance cabinets Designed to transmit 10/100 Mbps Ethernet signals over fibre optic cable using Small Form-factor Pluggable (SFP) modules This fibre optic media converter device can be used to transmit Ethernet data well beyond the 100 m limit of copper-based media and provides a secure, EMI/RFI free transmission path The media convertermodule along with the SFP module is user-installed directly into the AUTODOME's power supply box to provide an  integrated fibre optic solution

Transmitter Type, Receiver Type, 220, -40 ~ +75, 0 ~ 95, 13.5 VDC, 3 W

A multi-mode fibre (MMF) optic module with single SC connector Provides fast Ethernet optical interface for the VG4-SFPSCKT and the CNFE2MC/IN media converter Pluggable design Transmits longer than 2 km (1.2 miles) at 10/100 Mbps Wavelength (transmit/receive) - 1310nm/1550nm

A multi-mode fibre (MMF) optic module with single SC connector Provides fast Ethernet optical interface for the VG4-SFPSCKT and the CNFE2MC/IN media converter Pluggable design Transmits longer than 2 km (1.2 miles) at 10/100 Mbps Wavelength (transmit/receive) - 1550nm/1310nm

The ComNet™ FDX4D(M)(S)1 Series data transceiver series provide transmission of four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. The data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

FDX2HSDM1EA/M is a dual high speed RS485 data transceiver that meets RS485 (2W) specifications. The ComNet™ FDX2HSD(M,S)(1,2)(EA,EB)/M data transceivers is tested and certified by an independent laboratory for full compliance with the environmental requirements. The robust design of FDX2HSDM1EA/M assures extremely high reliability in unconditioned out-of-plant/roadside environments. The ComNet™ FDX2HSD(M,S)(1,2)(EA,EB)/M data transceivers are NTCIP compatible and the built-in fiber link tester allows for the testing of the fiber. The remote fault indication of FDX2HSDM1EA/M allows the user to determine when a fiber break or loss of prime operating power has occurred, or a transceiver in the field has failed.

The ComNet™ FDX72SHR series Self-Healing Ring Transceiver unit is a fully-digital modem designed for implementing RS 232, RS 422 or RS 485 2 or 4-wire data communications networks of the highest possible reliability. A network of FDX72SHR units can support one full-duplex or two half-duplex data channels. These transceivers also feature data translation to convert between data protocols. Data re-clocking and regeneration permit an almost unlimited number of transceiver/controller units to be used within the network.

Video Only, Transmitter Type, Receiver Type, 1 fibres, 1 channels, 6 MHz bandwidth, 38 x 70 x 107, 200, -40 ~ +75, 0 ~ 95, 12 V DC, 500 mA

The ComNet™ COMPAK1002MAC1M Ethernet 2 port media converters are designed to transmit and receive 10/100 Mbps data over multimode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments.

The ComNet™ FDX57 series self-healing ring transceiver unit is a fully-digital modem designed for implementing RS232, RS422 or RS485 2 or 4-wire data communications networks of the highest possible reliability. A network of FDX57 units can support one full-duplex or two half-duplex data channels. These transceivers also feature data translation to convert between data protocols. Data re-clocking and regeneration permit an almost unlimited number of transceiver/controller units to be used within the network.

IFS VT4010 video transmitter utilises frequency modulation for transmission quality that meets some of the requirements of EIA RS-250C Medium-Haul Video Transmission. This environmentally hardened unit provides transmission of NTSC, PAL, or SECAM video over one multimode fibre optic cable.

AMG4681 is a singlemode fiber standalone, with 8 channel.

AMG4641 is a singlemode fiber standalone, with 4 channel.

AMG4741 is a singlemode fiber standalone, with 4 channel.

Video Only, Transmitter Type, Receiver Type, 1 fibres, 1 channels, 10 Hz ~ 10 MHz MHz bandwidth, 178 x 124 x 25, 900, -40 ~ +74 , 0 ~ 95, 24 V AC, 300 mA

A single-mode fibre (MMF) optic module with duplex LC connector Provides fast Ethernet optical interface for the VG4-SFPSCKT and the CNFE2MC/IN media converter Pluggable design Transmits longer than 20 km (12.4 miles) at 10/100 Mbps Wavelength (transmit/receive) - 1310nm/1310nm

AMG4742Ris a singlemode fiber standalone, with 4channel.

The ComNet™ FDXT1/E1 data transceivers are T1/E1 links that support AMI and B8ZS data signals over one single mode or multimode optical fiber. The transceivers synchronize and regenerate data to eliminate jitter accumulated through the link. Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.

AMG4784 is a singlemode fiber standalone, with 8 channel.

The ComNet™ FDX55 series consists of fully-digital transceiver units designed for implementing simplex or full-duplex RS232 Drop-and-Repeat poll-and-respond traffic signalisation/communications data networks utilising one or two optical fibers. These environmentally hardened units are ideal for use in unconditioned out-of plant or roadside installations and the master-configured transceiver unit may be located anywhere within the network, making this equipment ideal for applications involving on-street master controllers with upstream and downstream communication requirements.

AMG4783 is a singlemode fiber standalone, with 8 channel.

The AMG4600 series are designed for low cost, multichannel point-to-point video transmission together with associated Ethernet and low speed data and audio signals. The AMG4600 series is designed for multimode fibre. The system can provide a highly resilient, managed, low cost, transmission system for both compressed and uncompressed video signals.

AMG4742 is a singlemode fiber standalone, with 4 channel.

ComNet FVTR1D1A2C1(M,S)1 transceiver supports simultaneous transmission of short-haul quality 10-bit bi-directional digitally encoded video plus one bi-directional data channel, two channels of bi-directional audio and contact closure over one multimode or single mode optical fibre. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces, and most major data protocols. The module uses 24-bit 96kHz sample rate digital encoding for superior transmission of balanced line-level audio.

The ComNet™ FVT/FVR80SFP series optical video link provides eight 10-bit medium-haul quality digital video channels, using optical small form factor pluggable modules (SFP). Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

The ComNet™ FDX70 data transceivers provide point-topoint transmission of simplex or duplex EIA RS 232/RS 422/ RS 485 (2W/4W) data signals over one single mode or multimode optical fiber. The transceivers are transparent to data encoding allowing for broad-range compatibility. Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments.

Data Transceiver, Transmitter Type, 1 fibres, 10 MHz MHz bandwidth, 230, -40 ~ +74 , 0 ~ 95, 24 V AC

Video Only, Transmitter Type, Receiver Type, 1 fibres, 1 channels, 6 MHz bandwidth, 25 x 158 x 232, 550, -40 ~ +75 , 0 ~ 95, 12 V DC, 500 mA

AMG4682 is a singlemode fiber standalone, with 8 channel.