CCTV Fiber Optic Transmitters & Telemetry  (354)

The VDS20032 model provides for the simultaneous transmission of 32 audio signals over one multimode or single mode optical fiber. The modules are available in either stand-alone or rack mount versions.

The VDS20064 model provides for the simultaneous transmission of 64 audio signals over one multimode or single mode optical fiber. The modules are available in either stand-alone or rack mount versions.

The eBridge16CR is a 16 channel ethernet over coax rack mount receiver. The eBridge16CR enables fast 10/100Base-T Ethernet digital communication to be transmitted over coax cable. This unit is designed to be used with eBridge1CT transceivers. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition the use of coax enables data transmission to be extended over 500m (over four times the 100m Ethernet maximum length), eliminating the need for repeaters. At the same time the units can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch.

eBridge100RM is a versatile dual solution Ethernet receiver/media converter which transmits data at 100Mbps full duplex and power over Coax cable or extended CAT5e cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan such as the Altronix NetWay series or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100TM/eBridge100ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over existing coax or structured cable.

eBridge1PCR is a single port EoC Receiver that transmits data and power over coax cable. eBridge1PCR generates PoE up the coax to an eBridge1PCT transceiver. The transceiver in turn delivers that PoE compliant power to an edge device/camera. This plug and play unit facilitates system upgrades from analog to IP utilizing existing legacy Coax and eliminates the costs and labor associated with installing new network cabling. Data transmission and power over the Coax is possible up to 500m in comparison to 100m Ethernet distance (CAT5e). A maximum range from head end to the edge device/camera is 610m, taking into consideration that up to 100m of structured cable may be deployed from the receiver to the network switch and the transceiver to the edge device/camera.

The eBridge8E is an all-in-one head-end solution for upgrading coax to IP that combines a PoE+ switch and EoC Receiver into a single integrated unit for upgrading existing coax infrastructure and deploying the latest IP devices. This 8-Port Managed EoC Receiver with Integral PoE+ switch provides 30W full power per port (240W max). Features also include an integral battery charger for applications requiring backup and embedded LINQ Technology to monitor, control and report power and diagnostics from anywhere.

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

Altronix eBridge1PCRX is a single port EoC Receiver that transmits data and power over coax cable. eBridge1PCRX generates PoE/PoE+ up the coax to an eBridge1PCT, eBridge1PCTX or eBridge1ST transceiver. The transceiver, in turn, delivers that PoE compliant power to an edge device/camera. This plug and play unit facilitates system upgrades from analog to IP utilizing existing legacy coax and eliminates the costs and labor associated with installing new network cabling. Data transmission and power over the coax is possible up to 500m in comparison to 100m Ethernet distance (CAT5e). A maximum range from headend to the edge device/camera is 700m, taking into consideration that up to 100m of structured cable may be deployed from the receiver to the network switch and the transceiver to the edge device/camera.

The eBridge1CT - IP over Coax transceiver is designed for use with eBridge1CR, eBridge4CR, and eBridge16CR receivers to enable fast 10/100Base-T Ethernet digital communication over coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission is extended up to 610m (over five times the 100m Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit Composite Video Signal with Ethernet data simultaneously.

Altronix eBridge800E is an all-in-one head-end solution for upgrading coax to IP that combines a PoE+ switch and EoC Receiver into a single integrated unit for upgrading existing coax infrastructure and deploying the latest IP devices. This 8-Port Managed EoC Receiver with Integral PoE+ switch provides 30W full power per port (240W max). Features also include an integral battery charger for applications requiring backup and embedded LINQ™ Technology to monitor, control and report power and diagnostics from anywhere.

The VDS3710 VGA fiber converter provides for the simultaneous transmission of 1 PC VGA signal over 1-core multimode or single mode optical fiber.

The VDS2008 model provides for the simultaneous transmission of 8 audio signals over one multimode or single mode optical fiber. The modules are available in either stand-alone or rack mount versions.

The eBridge1CR - IP over Coax receiver is designed for use with eBridge1CT to enable fast 10/100Base-T Ethernet digital communication over coax cable. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition data transmission is extended up to 610m (over five times the 100m Ethernet maximum length), eliminating the need for repeaters. eBridge units will transmit Composite Video Signal with Ethernet data simultaneously.

AMG4642R is a 4 channel video Rx multi-mode - rackmount module.

The VDS1001 model provides for the simultaneous transmission of 1 audio signal over one multimode or single mode optical fiber. The modules are available in either stand-alone or rack mount versions.

Compact single slot size – ideal for high density rack mount requirements  -40°C to +75°C temperature maintains performance in extreme conditions  Plug & Play – no need for any user configuration  Rack mount card cages available in 1U or 3U heights  All SFP ports are multirate 100Mb/Gigabit – support single and multimode, single or dual fibre options up to 120Km  10/100Mb Ethernet copper ports provide high bandwidth support  Auto-Negotiation (802.3u) – automatically determines the best connection speed  Manufactured in the United Kingdom  AMG Lifetime Support Warranty

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels. The Vision 5600 is designed for multimode fibre, whilst the 5700 is designed for single mode fibre. The products come in a variety of channel options in both standalone and rackmount formats to ensure maximum system versatility. Dual optical redundant options are also available.

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb SFP port includes an integrated multimode, single fibre, 2Km SFP Supports Jumbo Frames up to 2K bytes Intelligent features supported including link fault pass-through, jumbo frames and many others. AMG 3 Year Support Warranty

Compact single slot size – ideal for high density rack mount requirements  -40°C to +75°C temperature maintains performance in extreme conditions  Plug & Play – no need for any user configuration  Rack mount card cages available in 1U or 3U heights  All SFP ports are multirate 100Mb/Gigabit – support single and multimode, single or dual fibre options up to 120Km  10/100Mb Ethernet copper ports provide high bandwidth support  Auto-Negotiation (802.3u) – automatically determines the best connection speed  Manufactured in the United Kingdom  AMG Lifetime Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb/1Gb SFP port supports singlemode and multimode, single or dual fibre options up to 120Km (ordered separately)  Supports Jumbo Frames up to 9.6K bytes  Intelligent features supported including link fault pass-through, SFP reset and many others.  AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb/1Gb SFP port supports singlemode and multimode, single or dual fibre options up to 120Km (ordered separately)  Supports Jumbo Frames up to 9.6K bytes  Intelligent features supported including link fault pass-through, SFP reset and many others.  AMG 3 Year Support Warranty

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

Compact single slot size – ideal for high density rack mount requirements  -40°C to +75°C temperature maintains performance in extreme conditions  Plug & Play – no need for any user configuration  Rack mount card cages available in 1U or 3U heights  All SFP ports are multirate 100Mb/Gigabit – support single and multimode, single or dual fibre options up to 120Km  10/100Mb Ethernet copper ports provide high bandwidth support  Auto-Negotiation (802.3u) – automatically determines the best connection speed  Manufactured in the United Kingdom  AMG Lifetime Support Warranty

Compact single slot size – ideal for high density rack mount requirements  -40°C to +75°C temperature maintains performance in extreme conditions  Plug & Play – no need for any user configuration  Rack mount card cages available in 1U or 3U heights  All SFP ports are multirate 100Mb/Gigabit – support single and multimode, single or dual fibre options up to 120Km  10/100Mb Ethernet copper ports provide high bandwidth support  Auto-Negotiation (802.3u) – automatically determines the best connection speed  Manufactured in the United Kingdom  AMG Lifetime Support Warranty

The Vision 5600 and 5700 Series are designed for low cost, point-to-point single channel transmission of video and associated multiple low speed data/audio/alarm channels.

PCSC MineSafe is a miner tracking system consisting of MSHA-Approved fiber optic cable that continuously tracks the location of up to 128 miners, 24 hour a day, 7 days a week. The system provides a real-time display of the location of all employees inside the mine on a customised map of your mine. It has been tested at the US National Institute for Occupational Safety and Health Safety Research Coal Mine.

PCSC Tamper Alert is a perimeter control systems that is designed for seamless integration with PCSC’s hardware and software solutions. A highly sensitive, yet unobtrusive fiber optic sensing cable immediately detects and localises any disturbance to the fence caused by climbing, cutting, or tampering. It consists of rugged, low cost all-optical microphonic sensor cables, passive sensing nodes that delineate each detection zone, and a central processor unit.

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb/1Gb SFP port supports singlemode and multimode, single or dual fibre options up to 120Km (ordered separately)  Supports Jumbo Frames up to 9.6K bytes  Intelligent features supported including link fault pass-through, SFP reset and many others.  AMG 3 Year Support Warranty

Only Vigitron provides a complete system solution to meet any application requirements for extended distance IP Data and PoE applications. Available for both Unshield and Shielded Twisted Pair (UTP/STP) and Coax, Vigitron simplifies installation with the ability to use previously installed cabling regardless of distance.With single camera and secure fixed managed network extended distance switches. Vigitron IP's product provide centralised system solutions up to sixty four (64) cameras. We also make installations simpler and safer with extended distance surge protection products and our patent pending ViewMate™for confirming site power levels and local camera set up.Vigitron's patent pending technologies assure you of accurate performance for both data and PoE. Only Vigitron offers Symmetric Bandwidth (SBW™) maintaining both bandwidth and minimal packet information over quoted distance, with no difference between upload and download.Vigitron's patent pending Pass Through PoE (PTP) provides power from a single source such as a PoE network switch's port to power both transceivers and PoE camera, reducing installation costs by eliminating the need for costing power supplies and local power. Most important Vigitron's PTP™ maintains all the safety features of the 802.3 PoE standards, assuring maximum protection for transceivers and your camera. With built in green Low Power Consumption (LPC™) Vigitron's products provide reliable long term operation. One touch of competitors' products will tell you the difference.Vigitron is more than just product. We support our claims with detailed product certification testing to known standards. Our certification testing includes RFC2544 for bandwidth and packet performance to TCP/IP standards. We even extended this testing to cover the performance requirements of larger mega pixel cameras. Our ability to operate under temperature ranges of -40C to +75C is certified under strict NEMA-TS2 transportation testing standards. Vigitron's certification testing doesn't stop with laboratory testing. We conduct individual IP camera manufacturer tests to assure you of the highest integrated system performance, eliminating potentials of post install problems.All this addition to attention to detail has earned Vigitron written endorsements and support from the world's leading IP camera manufacturers. Our certification list includes Axis, Panasonic, Arecont, Samsung, Bosch, and Hikvision, just to name a few. Our commitment to you doesn't end with product. Our Extended Distance Design Center will help you design the correct products to meet your specific application requirements. Our commitment to education includes our white paper series.Our goal is to provide you with the information you need to make the right choice. Extended distance IP and PoE is complex. Choices should not only be made just on the what product specifications say, it's more important to know what they don't say.

Compact single slot size – ideal for high density rack mount requirements  -40°C to +75°C temperature maintains performance in extreme conditions  Plug & Play – no need for any user configuration  Rack mount card cages available in 1U or 3U heights  All SFP ports are multirate 100Mb/Gigabit – support single and multimode, single or dual fibre options up to 120Km  10/100Mb Ethernet copper ports provide high bandwidth support  Auto-Negotiation (802.3u) – automatically determines the best connection speed  Manufactured in the United Kingdom  AMG Lifetime Support Warranty

Compact single slot size – ideal for high density rack mount requirements  -40°C to +75°C temperature maintains performance in extreme conditions  Plug & Play – no need for any user configuration  Rack mount card cages available in 1U or 3U heights  All SFP ports are multirate 100Mb/Gigabit – support single and multimode, single or dual fibre options up to 120Km  10/100Mb Ethernet copper ports provide high bandwidth support  Auto-Negotiation (802.3u) – automatically determines the best connection speed  Manufactured in the United Kingdom  AMG Lifetime Support Warranty

Compact single slot size – ideal for high density rack mount requirements  -40°C to +75°C temperature maintains performance in extreme conditions  Plug & Play – no need for any user configuration  Rack mount card cages available in 1U or 3U heights  All SFP ports are multirate 100Mb/Gigabit – support single and multimode, single or dual fibre options up to 120Km  10/100Mb Ethernet copper ports provide high bandwidth support  Auto-Negotiation (802.3u) – automatically determines the best connection speed  Manufactured in the United Kingdom  AMG Lifetime Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack  1/2.5/10Gb SFP port supports singlemode and multimode, single or dual fibre options (ordered separately)  Supports Jumbo Frames up to 16K bytes  Intelligent features supported including link fault pass-through, automatic laser shutdown and many others.  AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb/1Gb SFP port supports singlemode and multimode, single or dual fibre options up to 120Km (ordered separately)  Supports Jumbo Frames up to 9.6K bytes  Intelligent features supported including link fault pass-through, SFP reset and many others.  AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb/1Gb SFP port supports singlemode and multimode, single or dual fibre options up to 120Km (ordered separately)  Supports Jumbo Frames up to 9.6K bytes  Intelligent features supported including link fault pass-through, SFP reset and many others.  AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb SFP port includes an integrated multimode, single fibre, 2Km SFP Supports Jumbo Frames up to 2K bytes Intelligent features supported including link fault pass-through, jumbo frames and many others. AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb SFP port includes an integrated multimode, single fibre, 2Km SFP Supports Jumbo Frames up to 2K bytes Intelligent features supported including link fault pass-through, jumbo frames and many others. AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb SFP port includes an integrated multimode, single fibre, 2Km SFP Supports Jumbo Frames up to 2K bytes Intelligent features supported including link fault pass-through, jumbo frames and many others. AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb SFP port includes an integrated multimode, single fibre, 2Km SFP Supports Jumbo Frames up to 2K bytes Intelligent features supported including link fault pass-through, jumbo frames and many others. AMG 3 Year Support Warranty

Ultra Compact size – ideal for confined spaces, and provides highly cost effective solutions Auto-Negotiation – automatically determines the best connection speed Wall mountable using the included wall bracket Rack mountable using the optional 19 inch 1U rack 100Mb SFP port includes an integrated multimode, single fibre, 2Km SFP Supports Jumbo Frames up to 2K bytes Intelligent features supported including link fault pass-through, jumbo frames and many others. AMG 3 Year Support Warranty