CCTV Power supplies & batteries  (658)

The ComNet™ PS12DC-1A-UNI has a removable pin head to allow it to use one of four different outlet configured pin heads to supply 12V DC power to ComNet stand-alone units. The PSU can also accept a standard figure 8 line cord input. Pin heads for the UK and Europe will be included as standard.

The FLEXPOWER FPO75/150-E4 is a dual voltage offline power supply -battery charger housed in a large cabinet for expansion and maximum field configuration flexibility. Listed modular accessories include: power distribution, relay based lock control, egress lock control, secondary voltage and network connection.

The FlexPower KT150-D8E2 is a dual voltage power management system which provides both 16VAC for Kantech system power and 12V or 24VDC to power locks (strikes or maglocks). One 200VA transformer powers eight power limited, class 2 outputs designated for panel power. For lock and auxiliary power circuits, the FPO DC power supply/charger provides 12 or 24VDC through eight fused, auxilliary outputs.

The FLEXPOWER FPA300A-2A8E5 is a dual voltage, AC camera power supply system specifically designed for the CCTV segment of the lifesafety industry. Providing 16 outputs, the unit is configured in a painted, steel, locking enclosure. Each output is individually protected and selectable for 24/28VAC and provides visual indication of AC output voltage.

The iSCAN150-8 provides eight activation inputs and eight monitored and controlled relay outputs. The managed inputs are capable of voltage or dry contact activation and the managed outputs are programmable to either of the two system voltages, fail-safe, fail-secure, fire alarm over ride, and AC loss over ride for egress lock control. Each managed output may also be individually activated or deactivated through an embedded browser interface and monitored for voltage and current values via network or internet.

3 AMP power supply unit with Fuse protection on each output. Off-line Switching Power Supply. Low frequency switching with no interference from Card readers and controllers. Auto resetting Circuit Breakerfor Battery. Output ON/OFF Service switch.

The ComNet™ PS12DC-HT power transformer supplies 12V DC power to ComNet™ stand-alone units. The PS12DC-HT operates on 100-240 VAC. The PS12DCHT is provided for installations with high ambient temperatures.

Line Condition LED on mains Input. Individual PTC (Positive Temperature Coefficient) output protection. Individual current protection. Automatic reset following short circuit condition. Built-in “no fuse” Break for short circuit P=protection. Toroidal transformer for high efficiency and Low temperature operation. Standard 1U 19-inch rack mount. Supplied with mains IEC lead.

PSU1SM from Genie is lightweight and small in size. It also has long power leads with 1.8 metres each. Additionally, it has integral mounting lugs.

Genie’s PSU24/2 has an AC adaptor and an operational input voltage of 100V to 240V AC. It also has integral mounting lugs.

PI100 Series provide single port, high power PoE PSE solution for remote PoE PD devices. Generating from 15.4 W to 40 W, PoE-PI100 series supplies remote power for new IP applications. It complies to IEEE 802.3 at PoE standrad and backward compatible to IEEE802.3af and Midspan. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices.

The ComNet™ CNGE1IPS is an industrial power over Ethernet (PoE+) midspan injection module that injects 56 VDC at 0.625 amperes to any network cable. Operating power and 10/100/1000T(X) Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. The CNGE1IPS is fully compliant with the requirements of IEEE 802.3at for Power Sourcing Equipment (PSE), and features auto detection of powered devices (PDs). Transmission distances of up to 330 feet (100 meters) are supported, and this injector supplies operating power for all PDs drawing a maximum of 30 watts.

16 alarm inputs, 3 alarm outputs. Connections via pluggable terminal blocks. IP 66 weatherproof enclosure. Alarm handling/masking. Pre-installed Cable glands. On board LEDs for RS 485 diagnostics.On board Lightening protection.

PI100 Series provide single port, high power PoE PSE solution for remote PoE PD devices. Generating from 15.4 W to 40 W, PoE-PI100 series supplies remote power for new IP applications. It complies to IEEE 802.3 at PoE standrad and backward compatible to IEEE802.3af and Midspan. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices.

PI100 Series provide single port, high power PoE PSE solution for remote PoE PD devices. Generating from 15.4 W to 40 W, PoE-PI100 series supplies remote power for new IP applications. It complies to IEEE 802.3 at PoE standrad and backward compatible to IEEE802.3af and Midspan. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices.

The FLEXPOWER FPO150-E2 is an offline switchmode power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FLEXPOWER FPX300A/150-A8D8E2 is an offline switchmode power supply-battery charger system specifically designed for the CCTV, access control, or security segments of the lifesafety industry. Providing for system power, 8 DC lock or auxiliary power outputs, and 8 AC camera power outputs, the unit is user selectable for 12 or 24VDC and 24 or 28VAC and is configured in a painted, steel, locking enclosure with tamper switch and integral battery space.

Altronix eFlow102NX8 is a power supply/charger that converts a 120VAC 60Hz input into eight (8) fuse protected 12VDC outputs with a total of 10A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

The FlexPower KS250-D8E2 is a dual voltage power management system which provides both 16.5V AC for Keyscan system power and 12V or 24V DC to power locks (strikes or maglocks). For Keyscan power, a 200VA transformer provides sixteen, power limited 16.5VAC sources from two separate transformer windings.

Altronix ALTV1224DC Series DC CCTV power supplies provide 12VDC or 24VDC distributed via eight (8) or sixteen (16) fused or PTC protected outputs with a total of 4A or 6A continuous supply current for powering CCTV cameras, heaters, and other video accessories.

Altronix eFlow104N16D is a power supply/charger that converts a 120VAC 60Hz input into sixteen (16) Class 2 power-limited PTC protected 24VDC outputs with a total of 10A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix ALTV1224DC220 Series DC CCTV power supplies provide 12VDC or 24VDC distributed via eight (8) or sixteen (16) fused or PTC protected outputs with a total of 4A or 6A continuous supply current for powering CCTV cameras, heaters, and other video accessories.

MobileView MVA-2551-12-115 uninterruptible power supply regulates input voltage fluctuations supplied to the MobileView System. When input voltage is out of operating tolerance the UPS continues to provide enough output voltage for a short duration ensuring uninterrupted operation of the MobileView System. UPS will charge backup battery during normal input voltage conditions.

ZVM-S2PSU is a series 2 PSU. Power input universal 99 to 264 V AC 50 ~ 60 Hz. Power output +12 V DC and -12 V DC.

8 AMP power supply unit with Fuse protection on each output. Off-line Switching Power Supply. Low frequency switching with no interference from Card readers and controllers. Auto resetting Circuit Breakerfor Battery. Output ON/OFF Service switch.

The RA300 series is a 24/28 VAC, 12/10 amp rackmount power system with multiple power distribution outputs and the capability to remote power reset up to two 8 output banks with the optional network connection. Ideal for CCTV applications in retail, health care, gaming, entertainment, transportation, government and educational facilities. The RA300 series delivers maximum flexibility for large multi-camera projects by providing increased current capability and allowing the user to individually select either 24 or 28V AC across eight, sixteen, or twenty-four outputs. Each output is fused at 3A and individually protected against electrical surges or transients caused by lightning or power line disturbances.

The ComNet™ PS24-1A-DIN Rail Power Supply is the low profile solution for building automation. The PS24- 1A-DIN is an environmentally hardened unit which is double insulated and ideal for most installations. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

IFS 613P is a power supplies for commercial and industrial applications. It is  available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

FlexPower MCLASS FPO75-D8PE2M is engineered to house FlexPower® power management boards alongside access hardware in one compact, secure system. It provides two power outputs user selectable for 12 or 24 VDC. One output provides continuous output power for system use, the second is resettable output power, activated when the fire alarm disconnect is initiated.

The PSU-224-DC100 universal power supply provides DC voltage to one or two devices requiring a total power of up to 96 W.

A four-port power injector that can supply four PoE cameras with power Makes PoE cameras easy to install Allows one-wire connection Reduces power supply requirements Compact and cost effective solution Supplies up to 15.4 W per port

IFS PS24VAC.6-EU is a power supplies for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

IFS PS48VDC.38A-EU is a power supplies for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

FlexPower MCLASS FPO150-D8PE4M is engineered to house FlexPower power management boards alongside access hardware in one compact, secure system. The FPO Power Supply/Battery Charger provides two power outputs user selectable for 12 or 24 VDC. One output provides continuous output power for system use, the second is resettable output power, activated when the fire alarm disconnect is initiated.

eFlow4NA8DV distributes and switches power to access control systems and accessories. It converts a 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC PTC protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

IFS PS48VDC65W-EU is a power supplies for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

IFS PS5VDC25W is a power supplies for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

IFS PS5VDC2A-US is a power supplies  for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

IFS PS48VDC100W-DIN 48VDC is a single output, environmentally hardened switching power supply.

The MaxiiPower Vi2208 is an 8 port high power POE midspan and is compatible with 10/100 BaseT and Gigabit Ethernet networks.