CCTV Power supplies & batteries  (637)

These boxed power supplies are the perfect choice for installations where you are powering low voltage cameras from one central point. For ease of installation, the units have either 4 or 8 individually fused outputs plus LED fault indication.

These boxed power supplies are the perfect choice for installations where you are powering low voltage cameras from one central point. For ease of installation, the units have either 4 or 8 individually fused outputs plus LED fault indication.

These boxed power supplies are the perfect choice for installations where you are powering low voltage cameras from one central point. For ease of installation, the units have either 4 or 8 individually fused outputs plus LED fault indication.

260 V AC, 24 V AC, Power Supplies & Batteries

NE-112/4 from eneo is a power supply unit with 110-240VAC, 12VDC-1,25A and stabilised for VHM/ECLIP-W.

The FlexPower FPO150-B100E1 is a dual voltage offline power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two pairs of outputs, each pair user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output of a pair provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

KPSU 12V is a Dedicated Micros 12 V keyboard power supply unit.

KPSU 9V is a Dedicated Micros 9 V keyboard power supply unit.

DM/OD/PSU is a Oracle PTZ power supply unit

DM/OD/PSU/ALMAN is an Oracle universal power supply unit and STD alarms.

DM/OD/PSU/ALMIP is an Oracle universal power supply unit and IP alarms.

The FLEXPOWER FPO75-D8E1 is an offline switchmode power supply-battery charger system specifically designed for multi-output general purpose power distribution, that may be used to provide distributed power for access, fire and the CCTV segments of the lifesafety industry. Providing for system power and multiple auxiliary power distribution outputs, the unit is user selectable for 12 or 24VDC and is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. Each auxiliary output is programmable for continuous power output or switched (resettable) voltage output.

The FLEXPOWER FPO150-D8E1 is an offline switchmode power supply-battery charger system specifically designed for multi-output general purpose power distribution, that may be used to provide distributed power for access, fire and the CCTV segments of the lifesafety industry. Providing for system power and multiple auxiliary power distribution outputs, the unit is user selectable for 12 or 24VDC and is configured in a paint - ed, steel, locking enclosure with tamper switch and integral battery space. Each auxiliary output is programmable for continuous power output or switched (resettable) voltage output.

PSU35SM from Genie is lightweight and small in size. It also has high efficiency and switching technology.

260 V AC, 12 V DC, 1.25 A, Power Supplies & Batteries

IFS HLG-240-48 is a power supplies for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

The FLEXPOWER FPO75/75-E2 is a dual voltage offline power supply-battery charger housed in a large cabinet for expansion and maximum field configuration flexibility. Listed modular accessories include: power distribution, relay based lock control, egress lock control, secondary voltage and network connection. Each power supply provides two pairs of outputs, each pair user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output of a pair provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

260 V AC, 12 V DC, 0.4 mA, Power Supplies & Batteries

The ComNet™ PS24-1A-DIN Rail Power Supply is the low profile solution for building automation. The PS24-1A-DIN is an environmentally hardened unit which is double insulated and ideal for most installations. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

IFS PS-12VDC is a plug-in power supply.

The iSCAN150-16 provides sixteen activation inputs and sixteen monitored and controlled relay outputs. The managed inputs are capable of voltage or dry contact activation and the managed outputs are programmable to either of the two system voltages, fail-safe, fail-secure, fire alarm over ride, and AC loss over ride for egress lock control. Each managed output may also be individually activated or deactivated through an embedded browser interface and monitored for voltage and current values via network or internet.

The design approach employed by ComNet™ for the modular C1PS power supply, provides for the elimination of a single-point failure in the event of a major fault within any module located within the chassis rack. This is accomplished through the use of automatic electronic current limiting within each rack-mountable module, rather than providing the current limiting within the power supply unit which supports the power requirements for equipment located within the rack. The C1PS rack power supply design employed by ComNet eliminates this possibility, as only the faulty module shuts down, and the operation of the other modules within the rack continue unimpaired.

6 AMP power supply unit with Fuse protection on each output. Off-line Switching Power Supply. Low frequency switching with no interference from Card readers and controllers. Auto resetting Circuit Breakerfor Battery. Output ON/OFF Service switch.

The FLEXPOWER FPO150/150-E4 is a dual voltage offline power supply- battery charger housed in a large cabinet for expansion and maximum field configuration flexibility. Listed modular accessories include: power distribution, relay based lock control, egress lock control, secondary voltage and network connection.

The ComNet™ PS24AC12DC power converter supplies 12V DC regulated power to a select group of ComNet™ stand-alone units. The PS24AC12DC has a 300mA output current.

The LifeSafety Power FPO250-N24E1R is a notification appliance circuit (NAC) expander power supply designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The unit connects to any 12 or 24V fire alarm control panel (FACP) or operates stand-alone. The unit is configured in a red painted, steel, locking enclosure with tamper switch and integral battery space. The FPO250-N24E1R will provide regulated and filtered 24VDC power to four NAC's and two auxiliary outputs, the first being a continuous output, and the other a resettable output controlled by NAC, dry contact or voltage input.

The FLEXPOWER FPO150-F8PE1 is an offline switchmode power supply- battery charger system specifically designed for multi-output general purpose power distribution. All class 2 distributed outputs are programmable for continuous, disabled, or enabled power output, under FAI control. The power supply board interfaces to a Lock Distribution Board F8P, which has 8 Class 2 outputs used to power electric locking devices. The F8P board also includes Fire Alarm Interface (FAI) circuitry and configurable fail-safe/fail-secure modes of operation.

The RD150/150 series is a dual voltage 12/24VDC, 12/6 amp rackmount power system with multiple power distribution outputs specifically designed for use within the access, security, CCTV, and the mass notification segments of the life safety industry. The network option monitors, reports, and controls power system functions over a local or wide area network. Available with either two, eight, or sixteen, continuous or switched power outputs, each output is fused at 3A and individually protected against electrical surges caused by lightning or transients on the external wiring.

The ComNet™ PS24AC5DC power converter supplies 5V DC regulated power to a select group of ComNet™ stand-alone units. The PS24AC5DC output is rated at 300mA.

Altronix DPS3 power supply/charger converts a low voltage AC input into a 6VDC, 12VDC or 24VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.

The FLEXPOWER FPO25-E1 is an offline switchmode power supply-bat - tery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FLEXPOWER FPO250-C8E1 is a single voltage, offline switchmode power supply-battery charger system specifically designed for the access control segment of the lifesafety industry. The unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space, and provides one power supply which can be set to 12 or 24V. Eight access controlled trigger inputs control eight relay based lock outputs, with each output programmable for fire alarm disconnect, fail-safe, fail-secure, or dry contact operation.

The FLEXPOWER FPO75-C8E1 is a single voltage, offline switchmode power supply-battery charger system specifically designed for the access control segment of the lifesafety industry. The unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space, and provides one power supply which can be set to 12 or 24V. Eight access controlled trigger inputs control eight relay based lock outputs, with each output programmable for fire alarm disconnect, failsafe, failsecure, or dry contact operation. This is agency listed for access control, fire, security, CCTV, and mass notification.

The FlexPower KT150-D8E2 is a dual voltage power management system which provides both 16VAC for Kantech system power and 12V or 24VDC to power locks (strikes or maglocks). One 200VA transformer powers eight power limited, class 2 outputs designated for panel power. For lock and auxiliary power circuits, the FPO DC power supply/charger provides 12 or 24VDC through eight fused, auxilliary outputs.

IFS PS-24VACCT-230 is a center tap power supply.

The ComNet™ PS12DC-1A-UNI has a removable pin head to allow it to use one of four different outlet configured pin heads to supply 12V DC power to ComNet stand-alone units. The PSU can also accept a standard figure 8 line cord input. Pin heads for the UK and Europe will be included as standard.

ComNet™ CWPOEIPS-15 is a low-cost power over Ethernet (PoE) midspan injection module that injects 48 VDC at 0.3 amperes to the unused pairs of any UTP or STP CAT-3, CAT-4, or CAT-5 network cable. Operating power and 10/100TX Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. Housed in a compact, rugged, light-weight package, and utilising a completely self-contained 100 to 240 VAC input power supply, the CWPOEIPS is fully compliant with the requirements of IEEE 802.3af for Power Sourcing Equipment (PSE), and features autodetection of powered devices (PDs).

IFS PS48VDC240W-DIN is a power supplies for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications

The FLEXPOWER FPO75/150-E4 is a dual voltage offline power supply -battery charger housed in a large cabinet for expansion and maximum field configuration flexibility. Listed modular accessories include: power distribution, relay based lock control, egress lock control, secondary voltage and network connection.

The ComNet™ CNGE1IPS is an industrial power over Ethernet (PoE+) midspan injection module that injects 56 VDC at 0.625 amperes to any network cable. Operating power and 10/100/1000T(X) Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. The CNGE1IPS is fully compliant with the requirements of IEEE 802.3at for Power Sourcing Equipment (PSE), and features auto detection of powered devices (PDs). Transmission distances of up to 330 feet (100 meters) are supported, and this injector supplies operating power for all PDs drawing a maximum of 30 watts.