CCTV Power supplies & batteries  (637)

OHOVPS1B is a wide range camera power supply for HOV and HTV housing.

ONXPS1B is a wide range of power supply for camera

ONXPS2B is a camera power supply.

Vicon V-POE-UPS power backup for PoE edge devices is a proactive and protective standalone unit. It connects inline to any edge device providing power backup and stability to allow continuous operation when power or connection is dropped and/or disconnected.

MOBOTIX MX-NPA-PoE-RJ is a PoE injector for direct connection to the PC. It has a 3 sockets RJ45 and universal power supply with RJ45 plug.

The HPOE-70W-INJ is a UPOE injector that uses the same cabling standard as PoE. Instead of delivering power over two twisted pairs, it provides the capability to source up to 60W of power by using all the four pairs of standard Ethernet cabling (Cat5e or better).

IRHPS230 is a power supply for 2 GEKO IRH illuminators.

OHEPS24 is a camera power supply.

Videotec UPTIRPS100N is an external power supply for ULISSE series prearranged for two LED illuminators, and control to synchronise IR illuminators with camera Day/Night switching.

Videotec UPTIRPS120UL is an external power supply for ULISSE with UPTIRN LED illuminators. It features twilight sensor.

Gigabit 802.3bt 60 W PoE Injector, single port.

Videotec UPTIRPS230N  is an external power supply for ULISSE with UPTIRN LED illuminators. It also has built-in sensitive switch for automatic on/off operations.

Videotec UPTJBUL is a weatherproof junction box for the power supply connection.

Provides up to 30W of PoE+ power to support connected devices such as Wisenet IP Cameras. Full-duplex transmission of 10/100 Mbps Ethernet 10/100 BASE-TX electrical port 100BASE-FX optical port when used with suitable SFPs Bi-color LED status indicators confirm operating status Uses Wisenet SFPs (sold separately) for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances of up to 120 km Compatible with other converters in the TMC-FSFP series Power supply included

Blue 12VDC output board (Outdoor models only)  

Sony SNTA-RP1 provides redundant power supply

Input voltage: 90 - 265 V AC Output voltage: 44 – 57 V DC Max current: 0.7 A Compatible with AXIS PoE extenders and PoE+ over Coax

WV-TB311E is a battery container.

IEEE 802.3at compliant Support for Axis PTZ domes Plug-and-play Can be installed on a wall, shelf or DIN rail with an accessory DIN clip

Delivers 30 W and is IEEE 802.3af compliant, which ensures compatibility with most of Axis network products with built-in PoE Ensures safe and reliable operation in outdoor environments Offers surge protection for both the AC and the PoE ports ensuring protection to the equipment from outdoor surges

IEEE 802.3af or IEEE 802.3at compliant Can be used with all Axis network products that have built-in support for PoE Can be installed on a wall, shelf or DIN rail with an integrated DIN-clip

A compact and flexible solution for PoE-based network devices Injects power and data to the network device with built-in PoE support Delivers up to 15.4 W and it is IEEE 802.3af compliant and, which ensures compatibility with most of Axis network products that have built-in support for PoE

Delivers 30 W and is IEEE 802.3at compliant, which ensures compatibility with most of Axis network products with built-in PoE Can be installed on a wall, shelf or DIN rail with an accessory DIN clip

Injects power and data to the network device with built-in PoE support Supports 16 network devices at the same time for cost-effective installation Delivers up to 15.4 W per port and is IEEE 802.3af compliant, which ensures compatibility with most of Axis network products that have built-in support for PoE

Compliant with IEEE 802.3at and 802.3af Support for Axis PTZ domes Plug-and-play Can be installed on a wall, shelf or DIN rail with an accessory DIN clip

Injects power and data to the network device with built-in PoE support Supports 8 network devices at the same time for cost-effective installation Delivers up to 15.4 W per port and is IEEE 802.3af compliant, which ensures compatibility with most of Axis network products that have built-in support for PoE

A compact, plug-and-play media converter with PoE With its integrated power supply, it minimises the amount of cabling and facilitates installation Offers data input through SFP or RJ45, and delivers High PoE 60 W Works with all Axis network products supporting Power over Ethernet

Outdoor-ready, IP66- and NEMA 4X-rated Compatible with AXIS Q60-E and AXIS Q61-E PTZ Cameras Offers surge protection for both the AC and the PoE ports ensuring protection to the equipment from outdoor surges IEEE 802.3at compliant

An industrial grade, 1-port midspan offering an easy, fast, and cost-effective solution for powering network products Wide compatibility with Axis PoE devices Plug-and-play 60 W Power over Ethernet Wide temperature range -40 °C to 75 °C (-40 °F to 167 °F) Dual DC inputs 20 - 60 V DC

Power supplies in the MCS Series offer a variety of configurations for powering up to 16 units from a single power source. The power supplies provide 24 VAC output for 4, 8, or 16 units. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available on most models.

Enables Axis' network products and accessories, such as Axis illuminators, media converters etc., to receive 12 or 24 V DC with up to 4.5A Can be powered from any Axis midspan or PoE switch Reduced installation costs Plug-and-play

A UL-certified power supply for use in hazardous locations Premounted with fuses, terminals, RJ45 coupler and 115/230 V AC transformer, which provides 24 V AC for explosion-protected cameras To enhance security and ease-of-installation, the power supply has three open 3/4" NPT cable entries for cable conduits The operating temperature ranges from -40 °C to 55 °C (-40 °F to 131 °F)

Certified for use in potentially explosive atmospheres according to ATEX, IECEx and EAC Made of SAE 316L stainless steel with a corrosion-resistant epoxy paint finish Pre-mounted with fuses, terminals, RJ45 coupler and a 115/230 V AC transformer, which provides 24 V AC for explosion-protected cameras and washer tank The operating temperature ranges from -40 °C to 55 °C (-40 °F to 131 °F)

A 19" rack-mountable 500 W power supply in a 1U rack For AXIS T8646 PoE+ Over Coax Blade Makes the installation and maintenance very effective

The POE1AT Power over Ethernet (PoE) single-port midspan is designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. The PoE+ single-port midspan offers total output power of 30 W, and meets the IEEE802.3at standard for detection, connection, disconnection, and fault protection.

Pelco POE16ATN-EU Power over Ethernet (PoE) 16-port midspan are designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. The midspan offers total output power of 33.6 W per port, and meets the IEEE802.3at standard for detection, connection, disconnection, and fault protection. Both models provide SNMP network management.

The power supplies provide 24 VAC output for 1–4 units, depending on the model selected. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available on the WCS4-20. The power supplies have a selectable input of 120 or 230 VAC.

Pelco POE4ATN Power over Ethernet (PoE) 4-port midspan is designed to meet the demanding data rate and power requirements of IP cameras with high-quality streaming video capabilities. The midspan offers total output power of 33.6 W per port, and meets the IEEE802.3at standard for detection, connection, disconnection, and fault protection. It also provides SNMP network management.

Indoor mains power supply Output - 24 V DC, 1.5A