CCTV Power supplies & batteries  (637)

57V 1U Rackmount Power Supply with 6 microfit connectors. 

57V 1U Rackmount Power Supply with 6 microfit connectors. 

The FLEXPOWER FPO150/250-2C82D8E4 is a dual voltage, offline switch-mode power supply-battery charger system specifically designed for the access control segment of the lifesafety industry. The unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space, and provides two power supplies, each of which can be set to 12 or 24V. Sixteen auxiliary outputs are provided for readers, REX devices, or other similar units with each output selectable for either power supply.

TDSi 2921-0280 is a boxed 1 A power supply unit with back-up battery charging facility.  It features high-quality linear regulator design, robust enclosure, fault indication LEDs & tamper switch. The product can be used for all access control, CCTV or general-purpose needs.

57V 1U Rackmount Power Supply with 6 microfit connectors. 

TDSi provides a complete range of efficient, cost-effective power supply units housed in robust painted steel enclosures. With outputs from 1 A to 5 A, these products can be used for all of your access control, CCTV or general-purpose needs. All products feature fuse protected outputs and back-up battery charging facility giving you piece of mind that a continuous power source will always be available.

1.8m secondary cable with open ends. Plastic housing.

Power Supply Unit 230V/12VDC-1.25A for Housings EHL-W/ECLKA and EHL-W/ECLKA-NW

eneo NE-129/12V power supply unit

Camera power supply for VTL-WWA housing series

The 12V 2A Power supply unit is available in either a plastic or metal cabinet. The cabinet can house both the 12V 2A PSU and a Net2 or I/O ACU with the option to accomodate a 12V/7Ah back up battery if desired. A tamper switch is also installed which registers an alarm if the lid is opened when connectedto an ACU or I/O board. Please note that the Net2 nano ACU and I/O board are not available for integration within the metal cabinet.

802.3af/at compliant 1 Ethernet Input Port (Data Only) + 1 Ethernet Output Port (Data + Power) Compact design and robust metal housing Smart Plug and Play Supports US plug

FlexPower FPO150150-E2 power supply features FlexPower feature set, 12 or 24VDC selectability, multiple outputs for simultaneous system power and lock control, fire alarm interface for egress lock control, fault detection and reporting.

Input voltage: 100-240VAC Output: 12VDC/1.5A Plastic housing 15cm secondary cable with open ends Power supply for AK-4 camera junction box

UPA power supplies provide efficient, constant power for CCD and MegaPixel cameras, keyboards and other low power usage products.  Meets or exceeds International Energy Efficiency Level IV requirements.  Screw terminals for ease of installation on some models.

UltraView KTP-24-8 is a multiple output power supply.

Veracity VPSU-57V-1500 is a power supply for use with the CAMSWITCH and HIGHWIRE Powerstar range of products. The 57V-1500 power supply delivers 1500mA of power.

802.3af/at compliant 1 Ethernet Input Port (Data Only) + 1 Ethernet Output Port (Data + Power) Compact design and robust metal housing Smart Plug and Play Supports US plug

802.3af/at compliant 1 Ethernet Input Port (Data Only) + 1 Ethernet Output Port (Data + Power) Compact design and robust metal housing Smart Plug and Play Supports EU plug

Voltage Supply Unit for Driven Dome Cameras. Fastrax/Spectra, Esprit, P/T Series VPT-40/41/-42.Input Voltage: 230VAC. Output: 24VAC/5A. Data Cable Loop-tru Terminal Inside. Index of Protection: IP66.

Veracity VPSU-57V-800 is a power supply for use with the CAMSWITCH and HIGHWIRE Powerstar range of products. The 57V-800 power supply delivers 800mA of power.

802.3af/at compliant 1 Ethernet Input Port (Data Only) + 1 Ethernet Output Port (Data + Power) Compact design and robust metal housing Smart Plug and Play Supports EU plug

240V AC, 12V DC, 16, 240 W, Power Supplies & Batteries, -10 ~ +40, IP66, 286 x 304 x 90, 3,500

The ComNet™ PS-9VDC power transformer supplies 9V DC power to ComNet stand-alone units. The PS-9VDC operates on 100-240 VAC. The PS-9VDC is supplied at no charge with many ComNet products

Eneo’s NE-135 has a plastic housing and is designed for domes eneo PLD, PXD Series

Input voltage: 230VAC Output: 24VAC/3.0A Signal, data and alarm loop terminals inside Weatherproof die-cast aluminium wall mount box Box includes turnable mounting arm Protection rating: IP66

TruVision TVPS-8-12DC eight output 12VDC power supply has dual-fuse protection (Master Fuse and Output Fuse per channel). The high outputs on each channel delivers the required power to all TruVision Line DC-powered cameras. It includes 3 conductor grounded line cord and illuminated power On/Off switch.

The FLEXPOWER FPA150A-A8E5 is a dual voltage, AC power supply system specifically designed for the CCTV segment of the lifesafety industry. Providing 8 outputs, the unit is configured in a painted, steel, locking enclosure. Each output is individually protected and selectable for 24/28VAC and provides visual indication of AC output voltage.

TruVision TVPS-4-12DC four output 12VDC power supply has dual-fuse protection (Master Fuse and Output Fuse per channel). The high outputs on each channel delivers the required power to all TruVision Line DC-powered cameras. It includes 3 conductor grounded line cord and illuminated power On/Off switch.

TruVision TVPS-01-24AC is a weatherproof, outdoor power supply designed to quickly power up an indoor or outdoor PTZ camera. This 24VAC, 4AMP power supply features a ruggedized cabinet with single-handed lockable latch. The power supply is dual voltage (120V or 240V) with 24V or 28V selectable fused outputs. It is IP66 and NEMA4X rated. The TVPS-01-24AC features two 1-1/8" knockout holes with 7/8" watertight nipples for easy access, as well as illuminated power On/Off switch.

The FLEXPOWER FPO150-E1 is an offline switchmode power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

UVB-SW Series is Messoa's PoE switch matrix that comply with IEEE 802.3 af PoE standard. It also features internal power supply and auto-MDI/MDI-X, auto-negation.

The FlexPower FPO75-B100E1 is a dual voltage offline power supply-battery charger specifically designed for the lifesafety industry. Capable of providing two pairs of outputs, each pair user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output of a pair provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. This is agency listed for access control, fire, security, CCTV, and mass notification.

UVB-I100 Series is Messoa's PoE Single Port Injector Series that provide single port and high-power PoE PSe solution for remote PoE PD devices. It cabe work with 10/100Base e-T networking devices and emerging 1000Base-T devices.

IFS PS48VDC.38A-US is a power supplies for commercial and industrial applications. It  is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

Dedicated Micros' (Dennard) DM/95055 is an IP65 replacement power supply unit for Dennard's 2060 dome camera.

Plug in.

IFS PS12VDC1.5A-U is a compact power supply.

NL4 is a four data port network module that communicates and controls power status over a local or wide area network. The NL4 provides four SPI ports for connection to FlexPower devices that enables monitoring and control of the power system. Typical data gathered and reported includes operational fault status, power supply output voltage, battery charging voltage, battery charging current, and fire alarm input status.

These boxed power supplies are the perfect choice for installations where you are powering low voltage cameras from one central point. For ease of installation, the units have either 4 or 8 individually fused outputs plus LED fault indication.