CCTV Power supplies & batteries  (658)

Grey shallow conduit adapter for 4 inch PCD base.

12VDC I/R PSU and washer drive with 4 IP alarms for MIC1.

White shallow conduit adapter for 4 inch PCD base.

Modular AC DIN Mount Power supply. Provides up to 180 W of system and PoE power to one OS6465-P6 or OS6465-P12 switch

A single port, high–power solution for remote powering of PoE enabled hardware, including Verkada security cameras, access control, and environmental sensors IEEE 802.3at compliant with 2–event classification IEEE 802.3af backward compatible Output power of 30W is guaranteed Supports 10/100/1000Base–T applications Compatible with IEEE 802.3af devices Safe – low power devices receive only the power they need Automatic Detection and Protection of non–standard Ethernet terminals Compact design fits easily in WLAN Access Point

Compatible with all DMP control panels and suitable for fire, access control and burglary system applications. The 505-12 is a regulated, power limited, switching power supply that meets UL, CSFM, NFPA and FCC compliance standards. The 505-12 is rated for 12 VDC at 5 Amps maximum. The 505-12LX provides two independent Class B NAC outputs. Each power supply includes a transformer, battery leads and a metal enclosure. (115 VAC, 12 VDC)

Supports 2 full 517R racks.

The PS12-5 is a regulated, power limited, switching power supply that meets UL, CSFM, NFPA, FCC and FDNY compliance standards. The PS12-5 is rated for 12 VDC at 5 Amps maximum. The PS12-5 provides two independent normally closed AC power and battery health indicator relays. Each power supply includes a transformer, battery leads and a metal enclosure. (120 VAC, 12 VDC). PS12-Upgrade allows you to easily upgrade existing installations that used 505-12 power supplies.

The PS12-5 is a regulated, power limited, switching power supply that meets UL, CSFM, NFPA, FCC and FDNY compliance standards. The PS12-5 is rated for 12 VDC at 5 Amps maximum. The PS12-5 provides two independent normally closed AC power and battery health indicator relays. Each power supply includes a transformer, battery leads and a metal enclosure. (120 VAC, 12 VDC)

The PS12-5 is a regulated, power limited, switching power supply that meets UL, CSFM, NFPA, FCC and FDNY compliance standards. The PS12-5 is rated for 12 VDC at 5 Amps maximum. The PS12-5 provides two independent normally closed AC power and battery health indicator relays. Each power supply includes a transformer, battery leads and a metal enclosure. (120 VAC, 12 VDC)

AC to DC Power Supply, Plug-In, 230VAC, Output 24VDC 3A

AC to DC Power Supply, Plug-In, 230VAC, Output 24VDC 3A

AC to AC Power Supply, Plug-In, 230VAC, Output 24VAC, 3A

Modular design for easy battery assembly, hanging design for easy solar panel installation. Built in high safety, high reliability, and long life lithium battery cell is suitable for a wide range of application scenarios. Built in self developed high efficiency solar controller realizes faster charging. Visual status indicator allows for easy understanding of the product’s operating status. Multiple protection functions such as high and low battery temperature protection, overcharge protection, undervoltage protection, etc. Metal casing, windproof and rainproof, capable of withstanding harsh outdoor environments. Built in heating module can be turned on in a low temperature environment, effectively protecting the battery life and ensuring the safety of charging. Back surface field and electrodes are made of high quality metal pastes, ensuring good conductivity. High efficiency monocrystalline silicon cell with high photoelectronic conversion efficiency. High transmittance tempered glass and UV resistant EVA backsheet materials further improve the conversion efficiency of photovoltaic modules. Anodized aluminum alloy frame improves the corrosion resistance and ensures that the components can withstand harsh outdoor environments. Allows to overlay the battery percentage OSD on the camera’s live video. Allows to be used with 4G cameras for surveillance applications in scenarios without power and network.

Compliant with IEEE802.3bt/at/af Standard 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Non-Vented Case 60W PoE Power Extends Ethernet to 200 Meters with copper, (can be even more with Fiber) Standard SFP Module Input Converts SFP to PoE (converts fiber to copper) Limited Power Source Full Protection OVP, OCP Single Source 4 Pair Power Current Sharing Gigabit Compatible

Compliant with IEEE802.3bt Standard Limited Power Source Compliant with Phihong Proprietary 12.5K Detection Single Source 4 Pair Power Current Sharing Non-Vented Case Broken Wire Detection 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Gigabit Compatible Full Protection OVP, OCP

Compliant with IEEE802.3bt Standard Limited Power Source Compliant with Phihong Proprietary 12.5K Detection Single Source 4 Pair Power Current Sharing Non-Vented Case Broken Wire Detection 4 Pair Powering +3,6,4,5 / - 1,2,7,8 Gigabit Compatible Full Protection OVP, OCP

Modular AC power supply. Provides up to 75 W of system and PoE power to one OS6465-P6 or OS6465-P12 switch

Modular AC rack mount power supply. Provides up to 180 W of system and PoE power to one OS6465-P28 switch

OmniSwitch 6860N PoE models use a different set of power supplies than the OmniSwitch 6860E PoE models. PoE power supplies cannot be used interchangeably between OS6860N and OS6860E models. OS6860N-BPXL power supply can only be used on premium switch models and requires input voltage of 200-240VAC for 2000W output. At 100-120VAC the output is 1000W. 

Modular design for easy battery assembly, hanging design for easy solar panel installation. Built in high safety, high reliability, and long life lithium battery cell is suitable for a wide range of application scenarios. Built in self developed high efficiency solar controller realizes faster charging. Visual status indicator allows for easy understanding of the product’s operating status. Multiple protection functions such as high and low battery temperature protection, overcharge protection, undervoltage protection, etc. Metal casing, windproof and rainproof, capable of withstanding harsh outdoor environments. Built in heating module can be turned on in a low temperature environment, effectively protecting the battery life and ensuring the safety of charging. Back surface field and electrodes are made of high quality metal pastes, ensuring good conductivity. High efficiency monocrystalline silicon cell with high photoelectronic conversion efficiency. High transmittance tempered glass and UV resistant EVA backsheet materials further improve the conversion efficiency of photovoltaic modules. Anodized aluminum alloy frame improves the corrosion resistance and ensures that the components can withstand harsh outdoor environments. Allows to overlay the battery percentage OSD on the camera’s live video. Allows to be used with 4G cameras for surveillance applications in scenarios without power and network.

All OmniSwitch 6860 models support 1+1 redundant, hot-swappable, load-sharing power supplies. The primary and backup power supply units are internal but removable to allow for easier maintenance and replacement. The OmniSwitch 6860 family also supports power load-sharing for PoE between the primary and backup power supplies. OmniSwitch 6860 enhanced models provide up to 1500 watts of PoE per switch, whereas the Advance/Premium models can provide up to 3400W of PoE per switch. There is no interruption of service when a new power supply is installed or an existing one replaced.

Modular DC rack mount Power supply. Provides up to 180 W(@48V input)/140W (@24V Input) of system and PoE power to one OS6465-P28 switch

All OmniSwitch 6860 models support 1+1 redundant, hot-swappable, load-sharing power supplies. The primary and backup power supply units are internal but removable to allow for easier maintenance and replacement. The OmniSwitch 6860 family also supports power load-sharing for PoE between the primary and backup power supplies. OmniSwitch 6860 enhanced models provide up to 1500 watts of PoE per switch, whereas the Advance/Premium models can provide up to 3400W of PoE per switch. There is no interruption of service when a new power supply is installed or an existing one replaced.

The power supply unit PLAN-200.18 provides up to 18W output power and is a perfect companion for our DiREX-Pro DVRs - particularly useful when a radio connection is not possible or not desirable. Thedevice supports TR-069. This protocol regulates communication between end devices and control servers. TR-069 makes it possible to configure and monitor entire PowerLAN networks.

External AC power supply. Provides system power to one OS6570-12 switch.

OmniSwitch 6860N PoE models use a different set of power supplies than the OmniSwitch 6860E PoE models. PoE power supplies cannot be used interchangeably between OS6860N and OS6860E models. OS6860N-BPXL power supply can only be used on premium switch models and requires input voltage of 200-240VAC for 2000W output. At 100-120VAC the output is 1000W. 

All OmniSwitch 6860 models support 1+1 redundant, hot-swappable, load-sharing power supplies. The primary and backup power supply units are internal but removable to allow for easier maintenance and replacement. The OmniSwitch 6860 family also supports power load-sharing for PoE between the primary and backup power supplies. OmniSwitch 6860 enhanced models provide up to 1500 watts of PoE per switch, whereas the Advance/Premium models can provide up to 3400W of PoE per switch. There is no interruption of service when a new power supply is installed or an existing one replaced.

Modular AC power supply. Provides system power to one OS6570 non-PoE switch

All OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced. All OS6900 models ship with two redundant power supply units. 

All OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced. All OS6900 models ship with two redundant power supply units. 

All OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced. All OS6900 models ship with two redundant power supply units. 

Modular AC power supply. Provides system power to one OS6570 non-PoE switch.

OmniSwitch 6860N PoE models use a different set of power supplies than the OmniSwitch 6860E PoE models. PoE power supplies cannot be used interchangeably between OS6860N and OS6860E models. OS6860N-BPXL power supply can only be used on premium switch models and requires input voltage of 200-240VAC for 2000W output. At 100-120VAC the output is 1000W. 

All OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced. All OS6900 models ship with two redundant power supply units. 

The Q4 Power is a 4-channel wall mount unit and is specifically designed for powering any camera within the Q EYE camera range. BNC connections out are provided for video distribution to multiplexers and monitors with pluggable terminal entries for cameras. The unit will power up to 4 cameras to a maximum distance of 200m and is BS EN60529 IP10 rated.

All OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced. All OS6900 models ship with two redundant power supply units. 

All OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced. All OS6900 models ship with two redundant power supply units. 

All OmniSwitch 6900 models support 1+1 redundant, hot-swappable AC and DC power supplies. The primary and backup power supply units are internal, but removable to allow for easier maintenance and replacement. There is no service interruption when a new power supply is installed or an old one replaced. All OS6900 models ship with two redundant power supply units. 

ACC–WA–30W/12V Switching Power Supply