CCTV Power supplies & batteries  (637)

Altronix eFlow104NX16DV is a power supply/charger that converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into sixteen (16) PTC protected 24VDC outputs with a total of 10A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow104NX is a power supply/charger that converts a 120VAC 60Hz input into a single 24VDC output with a total of 10A max. The unit includes an unswitched aux. output. It also offers a suite of features that includes fire alarm disconnect, over voltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3N4V is a power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a four (4) fuse protected outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. They also offer a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3N4DV is a power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a four (4) PTC protected outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. They also offer a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3N4 is a power supply/charger converts a 120VAC 60Hz input into a four (4) fuse protected Class 2 power-limited outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3N is a power supply/charger converts a 120VAC 60Hz input into a single Class 2 power-limited output. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3NXV is a power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single output. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. They also offer a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3NX4D is a power supply/charger converts a 120VAC 60Hz input into a four (4) PTC protected Class 2 power-limited outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3NX4 is a power supply/charger converts a 120VAC 60Hz input into a four (4) fuse protected Class 2 power-limited outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3NX4DV is a power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a four (4) PTC protected outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. They also offer a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3NV is a power supply/chargers converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single output. Power supply/charger is selectable for 12VDC or 24VDC with a total of 2A max. They also offer a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3NBV is a power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single 12VDC or 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow3NB UL Recognized power supply/charger converts a 120VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Altronix eFlow4N8D is a power supply/charger converts a 120VAC 60Hz input into eight (8) PTC protected Class 2 power-limited outputs. Power supply/charger is selectable for 12VDC or 24VDC with a total of 4A max. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Provides 24VAC or 28VAC distributed via four (4) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories Surge protection AC Power LED Power ON/OFF switch

Provides 24VAC or 28VAC distributed via four (4) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories Surge protection AC Power LED Power ON/OFF switch

Provides 24VAC or 28VAC distributed via four (4) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories Surge protection AC Power LED Illuminated power disconnect circuit breaker with manual reset

Provides 24VAC or 28VAC distributed via four (4) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories Surge protection AC Power LED Illuminated power disconnect circuit breaker with manual reset

Provides 24VAC or 28VAC distributed via four (4) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories Surge protection AC Power LED Illuminated power disconnect circuit breaker with manual reset

Power supplies have a green LED “mains on” indicator and include a spares bag containing battery leads, cable entry gland, fixing screws and wall plugs.

A power supply with 1 x 2 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A power supply with 2 x 2 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A power supply with 1 x 4Amp 24V AC fused outputs. Ideal for powering 24V AC CCTV cameras and camera housing heaters.

A power supply that provides 1 x 2A 24V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

The Vi1108PS is a high quality 8-ch fully isolated class II power supply that each output can be set individually to 24 VAC or 28 VAC.  Each power output can be individually turned on or off, is equipped with surge protection and a 2 A glass fuse easily accessable from front panel.  The input voltage can be selected at 110 VAC or 220 VAC via an external switch.

A power supply with 1 x 4Amp 24V AC fused output. Ideal for powering 24V AC CCTV cameras and camera housing heaters. ABS IP66 rated enclosure.

A power supply with 8 x 0.5Amp 24V AC fused outputs. Ideal for powering 24V AC CCTV cameras and camera housing heaters.

The Bosch UPA Series of Power Supplies is designed specifically for the continual use demands of professional surveillance products. While UPA models are used primarily with security cameras, their small size and high energy efficiency rating also make them ideal for powering a wide range of other low power security products, including many Allegiant® system accessories and control devices.

The Vi1100PS is a device that converts 24 VAC input to 12 VDC to power 12 VDC cameras. It can be used to extend power distances up to 3,000 feet (930 m) over 2 pairs of a single Cat-5 cable for structured cabling CCTV installations.  Its compact size makes it easy to mount in tight places variety of applications.

A power supply with 4 x 500mA 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A power supply with 2 x 1 Amp, 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A 3 Amp 12V DC (13.7) power supply with 4 individually fused outputs, which will house and charge one VRLA battery up to 7Ah capacity. Unit comes with SPCO contacts for indicating mains fail and low voltage states and also has a tamper microswitch. Steel cased.

A power supply that provides 8 x 500mA 12V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A compact PSU supplying 12VDC with 4 x 2A fused, indicated outputs. Wide mains input range of 96 – 250 VAC. Typical uses include CCTV camera and mag-lock supply.

A compact PSU supplying 12VDC with 4 x 2A fused, indicated outputs.  Wide mains input range of 96 – 250VAC. Typical uses include CCTV camera and mag-lock supply.

A power supply with 4 x 1 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A power supply that provides 1 x 4A 12V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A power supply that provides 4 x 500mA 24V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A power supply with 1 x 1.5 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases, maglocks and CCTV cameras.

The Vi1116PS is a high quality 16-ch fully isolated class II power supply that each output can be set individually to 24 VAC or 28 VAC.  Each power output can be individually turned on or off, is equipped with surge protection and a 2 A glass fuse easily accessable from front panel.  The input voltage can be selected at 110 VAC or 220 VAC via an external switch.