CCTV Power supplies & batteries  (637)

For general purpose, up to 5 years in standby service or more than 260 cycles at 100% discharge. Sealed non-spillable lead acid batteries. Highly efficient, leak proof and maintenance free.

12VDC input PSU and interface for MIC1-400.

The MIC-IPIR-PS-24 power supply features ONVIF conformant encoder and provides interoperability with other conformant systems.

As more video surveillance and security systems continue to migrate to IP networked platforms, the benefits of Power over Ethernet (PoE) continue to gain traction and grow in demand. NetWayM Managed PoE Midspans are IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant to support both PoE cameras and edge devices, as well as non-PoE compliant IP 12 V DC cameras. "NetWayM Managed PoE Midspans provide a practical solution for networked video and security systems that support both PoE and non-PoE compliant devices," said Alan Forman, President, Altronix. "NetWayM further extends the different variety of edge devices system designers can specify for system upgrades and new system builds that take advantage of PoE." The NetWay8M features eight ports with a total output of 150W, and the NetWay16M features sixteen ports with a maximum output of 300W. Each port has a maximum output of 30W and will automatically adjust power to the PoE device connected. Power allocation for each port is designated in prioritised order which can be programmed through an Ethernet port that also facilitates status monitoring via a PC. Unused ports can be disabled to prevent unauthorised network connections, and each port can be individually shut down for service/maintenance. Additionally, a trigger input disables power to specified ports on-demand. Cameras / edge devices may be located up to 100m (328 feet) from the NetWayM Managed PoE Midspans, and this distance can be extended in 100m (328 feet) increments using NetWayXT repeater modules. Both models are designed in 1U 19-inch EIA racks, UL/CUL Listed for Information Technology Equipment (UL 60950-1), and backed by a lifetime warranty.

16 Alarms support combination of both hard wired and wireless inputs. Wireless receiver within the PSU is directly compatible with the Redvision range of wireless PIR’s. Single or multiple domes can be triggered from a single wireless PIR activation.

A full range of MIC Series power supply units (PSUs), with integrated Bosch IP technology provides all connections for power, telemetry and video for MIC Series MIC550, MIC550IR, and MIC612 cameras. These MIC IP PSUs ensure that the cameras can be installed in a variety of locations, including low voltage and mobile applications.

For general purpose, up to 5 years in standby service or more than 260 cycles at 100% discharge. Sealed non-spillable lead acid batteries. Highly efficient, leak proof and maintenance free.

Bosch LTC 8905/90 is a 120/240 V AC power supply unit for LTC 8901 and LTC 8904 Series CPU equipment bay.

For general purpose, up to 5 years in standby service or more than 260 cycles at 100% discharge. Sealed non-spillable lead acid batteries. Highly efficient, leak proof and maintenance free.

Altronix NetWay8 Midspans provide power and pass data (video) for PoE compliant cameras/devices. Eight ports in a space saving 1U EIA 19" rack mount chassis. Cameras/devices may be located up to 100m (328 ft.) from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.)is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras by utilizing NetWay1512 or NetWay3012 adapters.

Grey deep conduit adapter for 4 inch PCD base.

OT Systems MDR-40-48 is a 40W 48 V DC DIN-Rail power supply with input/output terminal block.

OT Systems DRP-480S-48 is a 480W 48 V DC DIN-Rail power supply with input/output terminal block.

OT Systems DR-30-24 is a 30W 24 V DC DIN-Rail power supply with input/output terminal block.

OT Systems EDR-75-48 is a 75W 48 V DC DIN-Rail power supply with input/output terminal block.

OT Systems DR-120-48 is a 120W 48 V DC DIN-Rail power supply with input/output terminal block.

OT Systems DRP-240-48 is a 240W 48 V DC DIN-Rail power supply with input/output terminal block.

Altronix BTL125 rechargeable Lithium Iron Phosphate (LiFePO4) Battery supplies 12VDC for security, access, surveillance, and fire applications. It offers up to 10 times longer cycle life with only about 50% of the weight of a comparable lead acid battery.

Veracity VAD-CHGR is a spare charger unit for VAD-PSP, VAD-PSW (was VAD-PS-PSU).

VS-PSU65W-EXT is a Dedicated Micros power supply for Digital Sprite and ECO.

VS-PSU43W-EXT/C is a Dedicated Micros power supply unit for Uniplex/DX pro/sprite.

DM/94012 is a power supply unit for 2040 cameras

4Ah battery

1.2Ah battery

12Ah battery

2Ah battery

24Ah battery

7AH 12V value regulated sealed lead acid battery

Parabit TR DCR16-8-1-UL is a regulated / fused 16-channel UL Listed power supply.

Parabit TR AC16-2-1UL is a fused 16-channel UL Listed power supply.

Genie CCTV Optional IP rated boxed power supply unit for Raptor room for RX10X

Parabit TR DCR8-4-1UL is a regulated / fused 8-channel UL Listed power supply.

Parabit TR ACDC881-UL is a regulated DC / fused 16-channel UL Listed power supply.

Parabit TR AC8-1-1UL is a fused 8-channel UL Listed power supply.

White deep conduit adapter for 4 inch PCD base.

Black shallow conduit adapter for 4 inch PCD base.

Black deep conduit adapter for 4 inch PCD base.

12VDC I/R PSU and washer drive with 4 IP alarms for MIC1.

2.1AH 12V value regulated sealed lead acid battery

2.8AH 12V value regulated sealed lead acid battery