CCTV Power supplies & batteries  (637)

Integrated design, easy to install.  Pole mount.  Flexible angle adjustment of the solar panel and the camera.  100W Monocrystalline solar panel.  Built sturdy to resist storms with sustained winds up to 117 km/h.  Remote monitoring available through the mobile app.  Maximum Power Point Tracking (MPPT) charging controller.  RS-485 communication function.  Electric protection.

Easy installation With indicator light working Support -30℃~+70℃ wide-range temperature operation, and the full load efficiency of the power supply can be up to 100% at these temperatures Accurate overcurrent, overvoltage protection

Easy installation With indicator light working Support -30℃~+70℃ wide-range temperature operation, and the full load efficiency of the power supply can be up to 100% at these temperatures Accurate overcurrent, overvoltage protection

100Vac–240 Vac wide input voltage range, meet the requirements in different parts for electric network fluctuation. Easy installation. V level of energy efficiency Over current, over voltage and other multiple protection Shell flame resistance V-0 level.

Easy installation With indicator light working Support -30℃~+70℃ wide-range temperature operation, and the full load efficiency of the power supply can be up to 100% at these temperatures Accurate overcurrent, overvoltage protection

Easy installation; 90~264Vac wide input voltage range, meet the requirements in different parts for electric network fluctuation; High quality and reliability: pass 3 months high temperature aging test; 4KV outdoor lightning protection grade.

The control system of the solar power supply system, used to control the charge and discharge of the small off-grid solar power system; This product includes a MPPT solar charge and discharge controller, a lightning arrester, a DC circuit breaker and a distribution box, etc. MPPT solar charge and discharge controller: max. MPPT tracking efficiency is up to 99%, can significantly improve the energy utilization of photovoltaic system, which is 15%~20% higher than that of traditional PWM; use advanced digital power supply technology, the efficiency of circuit energy conversion is up to 98%; support automatic identification of system voltage, current limiting charging mode, built-in over temperature protection mechanism, etc. Lightning arrester: max. discharge current 20kA; DC circuit breaker: high arc extinguishing ability, more safe and reliable than the AC circuit breaker; Distribution box: IP54, 1.2mm thick SUS201 material, with the cooling function, when the temperature is higher than 45℃, the fan will open automatically.

The control system of the solar power supply system, used to control the charge and discharge of the small off-grid solar power system; This product includes a MPPT solar charge and discharge controller, a lightning arrester, a DC circuit breaker and a distribution box, etc. MPPT solar charge and discharge controller: max. MPPT tracking efficiency is up to 99%, can significantly improve the energy utilization of photovoltaic system, which is 15%~20% higher than that of traditional PWM; use advanced digital power supply technology, the efficiency of circuit energy conversion is up to 98%; support automatic identification of system voltage, current limiting charging mode, built-in over temperature protection mechanism, etc. Lightning arrester: max. discharge current 20kA; DC circuit breaker: high arc extinguishing ability, more safe and reliable than the AC circuit breaker; Distribution box: IP54, 1.2mm thick SUS201 material, with the cooling function, when the temperature is higher than 45℃, the fan will open automatically.

Vivotek AA-221 is a 180-degree power adapter with 100 ~ 240 V AC input and 12 V DC, 1.5A output.

Vivotek AA-341 is a power adapter with 230 V AC input and 24 V AC, 3.5A output.

Vivotek AA-222 is a 90-degree power adapter with 100 ~ 240 V AC input and 12 V DC, 1.5A output.

Vivotek AA-231 is a 180-degree power adapter with 100 ~ 240 V AC input and 12 V DC, 2.5A output.

30 Ah chargeable lithium battery

MOBOTIX MX-NPA-PoE-EU-Set power adapter for all MOBOTIX cameras except for M1 und M10 and MOBOTIX media converter Mx2wire. A PoE injector with crossover function for direct connection to the PC. The kit includes blue adapter with 3 sockets RJ45 and universal power supply with RJ45 plug. 

MOBOTIX MX-NPA-PoE-INT-Set power adapter for all MOBOTIX cameras except for M1 und M10 and MOBOTIX media converter Mx2wire. A PoE injector with crossover function for direct connection to the PC. The kit includes blue adapter with 3 sockets RJ45 and universal power supply with RJ45 plug.

Avigilon H4-AC-WIFI2-EU is a USB Wi-Fi Adapter for European Union

Avigilon H4-AC-WIFI1-NA is a USB Wi-Fi Adapter for North America, Latin America (except Brazil), Taiwan

Avigilon H4-AC-WIFI1-EU is a USB Wifi Adapter

Vivotek AP3001 is a PoE plus injector with LED indicators..

Universal AC input / full range Can be installed on DIN rail TS-35/7.5 or 15 Cooling by free air convection

Universal AC input / Full range ?Compact size Protections: Short circuit / Overload / Over voltage Cooling by free air convection Isolation Class? No load power consumption<0.1W Pass LPS(Except for 5V) 100% full load burn-in test

Universal AC input / full range Built-in DCOK active signal Cooling by free air convection LED indicator for power on No load power consumption

Universal AC input / full range Built-in active PFC function Cooling by free air convection  

Vivotek AP331 is a high power PoE with AC Jack power.

Universal AC input / full range Can be installed on DIN rail TS-35/7.5 or 15 Cooling by free air convection  

Universal AC input / full range Built-in active PFC function Cooling by free air convection IP67/IP65  design for indoor or outdoor installations Class 2 power unit Suitable for LED lighting and moving sign applications

Universal AC input / full range Built-in active PFC function Cooling by free air convection IP67/IP65  design for indoor or outdoor installations Suitable for LED lighting and moving sign applications

Universal AC input / full range Built-in active PFC function Cooling by free air convection IP67/IP65  design for indoor or outdoor installations Suitable for LED lighting and moving sign applications

MOBOTIX MX-SNT-INT-PoE is a universal power supply with 4 power pulgs.

The PoE Injector can power any 802.3af PoE device, including your Ava Flex and Ava Compact Dome. The PoE injector is suitable when your ethernet switch does not support PoE, or when using a camera in WiFi mode, like when operating Ava Flex on a WiFi network.

The PoE Injector can power any 802.3af PoE device, including your Ava Flex and Ava Compact Dome. The PoE injector is suitable when your ethernet switch does not support PoE, or when using a camera in WiFi mode, like when operating Ava Flex on a WiFi network.

The PoE Injector can power any 802.3af PoE device, including your Ava Flex and Ava Compact Dome. The PoE injector is suitable when your ethernet switch does not support PoE, or when using a camera in WiFi mode, like when operating Ava Flex on a WiFi network.

The PWR-P-POE30 inject Power over data-carrying Ethernet cabling. It follows the IEEE802.3AT standards and is completely compatible with existing Ethernet switches and networked devices.

Power supply for several MxBus modules of one MxBus line 2x2 connection terminals for MxBus 2 connection terminals for external power supply from 12 to 48 V DC (2 terminals) Max. output rating: 9 W IP66/IK08, -30 bis 60 °C / -22 to 140 °F Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x, D2x

The PWR-P-POE15 inject Power over data-carrying Ethernet cabling. It follows the IEEE802.3AF standards and is completely compatible with existing Ethernet switches and networked devices.

Indoor single port PoE+ 30W injector. Injector operational temperature range -20 °C to +40 °C (-4 °F to 104 °F).

High Temperature-Rated, Hardened Power Supply for Wisenet Transmission products -40⁰C to +71⁰C With -40⁰C Start-Up Universal AC input: 90 to 264 VAC, 47-63Hz Supplies 12VDC 33 Watts (2.75A) Adjustable output voltage range support Mounts on standard 7.5 or 15 mm DIN-rail Small package for limited space installations, fan-less design

Injects Power over data-carrying Ethernet cabling Follows the IEEE802.3BT/IEEE802.3AT/IEEE802.3AF standards and is compatible with existing Ethernet switches and networked devices Provides up to 83W HPoE/POE++ Built-in SFP slot

Injects Power over data-carrying Ethernet cabling Follows the IEEE802.3BT/IEEE802.3AT/IEEE802.3AF standards and is compatible with existing Ethernet switches and networked devices Provides up to 60W HPoE/POE++ Built-in SFP slot

Alarm/Audio I/O Box for PTZ PLUS cameras 1 RJ45 port  4 Selectable I/O ports  2 Audio I/O ports (1 each)  Power : PoE / Consumption: Maximum 4.5W  Dimensions :143mm x 73mm x 27.3mm (5.63" x 2.87" x 1.07")  Weight : 171g (0.38lb)  Color : White