CCTV Power supplies & batteries  (658)

The MaxiiPower Vi2216 is a 16port high power POE midspan and is compatible with 10/100 BaseT and Gigabit Ethernet networks.

The F8 module adds 8 controlled voltage outputs with supervision to a FlexPower power supply and is typically supplied as part of a system or purchased as an expansion piece to an existing system. Each module provides 8 protected outputs, each output programmable to enable voltage on activation of the fire alarm interface (FAI), disable voltage on FAI or provide a constant output voltage.

Bosch MIC-24PSU-2 is a 24 VAC power supply unit with two video outputs for MIC Series cameras. It ensures that MIC cameras can be installed in a variety of locations, including low voltage and mobile applications. The power supply has UL, CE, and FCC approval, is rated to IP65 as well as supports 50/60 Hz.

19 Gauge grey enclosure with ample knockouts for convenient access. Fits two (2) 12VDC/7AH batteries.

19 Gauge grey enclosure with ample knockouts for convenient access. Fits four (4) 12VDC/12AH batteries.

IFS PS48VDC65W-US is a power supplies for commercial and industrial applications. It is available in various configurations, such as wall-mount with exchangeable plug adaptors for flexible global use, desktop "in-line brick style" and DIN-rail for robust industrial applications.

The 61xP series power supplies are designed to supply low voltage power for standalone fiber link modules. Models are available with either AC or DC outputs.

PS24VAC.6-US is UL and CSA approved and features low voltage outputs.

19 Gauge grey enclosure with ample knockouts for convenient access. Fits up to two (2) 12VDC/18AH batteries or fits up to four (4) 12VDC/7AH batteries.

Provides all connections for power, telemetry and video for the MIC series range of PTZ cameras. Weather-resistant, cast-aluminum IP65 enclosure. Weather-resistant 1/2-in. NPT, M16, and M12 cableglands for connection of power, video, telemetry and ancillary equipment. Integrated washer pump drive with test function (IR power supplies only). Integrated four-input alarm terminal (IR power supplies only). Ground isolation and termination to control videogrounding and to prevent ground loops.

ComNet™ model PS48VDC-5A is a high-quality, low-noise switching mode power supply ideally suited to those applications requiring POE (Power Over Ethernet). This rugged unit may be either DIN-rail or shelf-mounted, providing an identical mounting configuration to the mating POE switch. Up to 10 POE field devices may be powered from a single supply, and the high output current capacity provides an adequate safety margin.

19 Gauge grey enclosure with ample knockouts for convenient access. Fits two (2) 12VDC/12AH batteries.

ReServ1 Video Surveillance UPS is designed to simultaneously provide power for 12 V DC and 24 V AC cameras during normal or power outage conditions. True sine wave regulated AC outputs and regulated DC outputs.

Altronix ALTV1224CCB AC/DC Dual Output Power Supply is designed to provide both 12VDC and 24VAC outputs where a combination of both AC and DC outputs are required.

19 Gauge grey enclosure with ample knockouts for convenient access. Fits four (4) 12VDC/12AH batteries.

19 Gauge red enclosure with ample knockouts for convenient access. Fits two (2) 12VDC/7AH batteries.

19 Gauge grey enclosure with ample knockouts for convenient access. Fits one (1) 12VDC/7AH or two (2) 12VDC/4AH batteries. NEMA 1 enclosure.

The CPSU-24-1.0A-II is a 24V AC 1.0A linear power supply designed for use in the CCTV industry. The power supply comes fitted with a 3 pin UK style mains plug, two mounting lugs allow the PSU to be fixed in position and red and black output lead allow simple matching to positive and ground terminals on the camera. The PSU is ideal to power GANZ internal cameras.

A 19” rack mountable power supply with 16 x 1Amp 24V AC output.

19 Gauge steel enclosure. Ample knockouts accommodating either 3/4” or 1” conduits for convenient access. Cam lock and keys are included. Fits up to four (4) 12VDC/12AH batteries.

19 Gauge red enclosure with ample knockouts for convenient access. Fits up to two (2) 12VDC/17AH or fits up to four (4) 12VDC/7AH batteries.

19 Gauge red enclosure with ample knockouts for convenient access. Fits four (4) 12VDC/12AH batteries.

19 Gauge red enclosure with ample knockouts for convenient access. Fits two (2) 12VDC/12AH batteries.

19 Gauge grey enclosure with ample knockouts for convenient access. Fits one (1) 12VDC/40AH battery.

19 gauge grey enclosure with ample knockouts for convenient access. Fits one (1) 12VDC/7AH or two (2)12VDC/4AH batteries. NEMA 1 enclosure.

LifeSafety Power NPM130-1 is a 30W single port PoE midspan injector designed for access control and security industry applications. The NPM130 provides power and passes data for PoE compliant devices. The NPM130 complies with IEEE802.3at standard and provides up to 30W power to PoE compliant Powered Device such as IP cameras or door control devices. The NPM130 utilises 24 V AC or DC power from LifeSafety Power’s FPO series power systems, or alternatively, from AC power mains through a 24 V AC Class 2 wall adapter or exisiting CCTV power source.

A full range of MIC Series power supply units (PSUs), with integrated Bosch IP technology provides all connections for power, telemetry and video for MIC Series MIC550, MIC550IR, and MIC612 cameras. The MIC IP PSU uses Dual Streaming to generate two independent IP video streams per channel if sufficient computational power is available. The MIC IP PSU features a highly flexible recording scheduler, providing up to ten programmable recording profiles and allowing individually assigned camera profiles.

A 19” rack mountable power supply with 8Amp 12V DC individually fused and indicated outputs. The PSU will house and charge one or two VRLA 12 VDC batteries 12Ah in size. Typical uses are for powering door access controllers, electric releases, maglocks and CCTV cameras.

DA449 will provide 8 Amp 12V DC (13.7) or 4 Amp 24V DC (27.4). This variant also features fan assisted cooling.

A 19” rack mountable power supply with 8Amp 12V DC individually fused and indicated outputs. The PSU will house and charge one or two VRLA 12 VDC batteries 12Ah in size. Typical uses are for powering door access controllers, electric releases, maglocks and CCTV cameras.

ComNet™ model PS48VDC-10A is a high-quality, low noise switching mode power supply ideally suited to those applications requiring POE (Power Over Ethernet). This rugged unit may be either DIN-rail or shelf-mounted, providing an identical mounting configuration to the mating POE switch. Up to 24 POE field devices may be powered from a single supply, and the high output current capacity provides an adequate safety margin.

The DA449-8op is supplied with additional 8 x 1A fused output pcb to allow easy distribution to multiple devices. The output pcb is provided with self adhesive supports and is fitted by the installer into the metal case. This takes up one of the two 7Ah battery spaces.

A 19” rack mountable power supply with 8Amp 12V DC individually fused and indicated outputs. The PSU will house and charge one or two VRLA 12 VDC batteries 12Ah in size. Typical uses are for powering door access controllers, electric releases, maglocks and CCTV cameras.

A 19” rack mountable power supply with 8Amp 12V DC individually fused and indicated outputs. The PSU will house and charge one or two VRLA 12 VDC batteries 12Ah in size. Typical uses are for powering door access controllers, electric releases, maglocks and CCTV cameras.

Power supplies for all cameras.

VG4-A-PSU2 230 is a 230 VAC Power Supply Unit. White.

Altronix eFlow102NBV is a power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single 12VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

LifeSafety Power NPE130-1 PoE midpsan power extractor is designed to provide 12VDC, up to a maximum of 25W output power, to a non-PoE device (e.g. camera) from a PoE source. RJ45 connectors are provided for data input and output, and two terminal strips are provided for the DC output and power level selection. The NPE130 is compatible with the IEEE802.3at standard and is capable of accepting PoE connections of Mode A, Mode B, or Mode A and B simultaneously. Operation with reverse polarity at the PoE input is also supported.

Altronix eFlow104NA8 unit distribute and switch power to access control systems and accessories. It converts a 120VAC 60Hz input into eight (8) independently controlled 24VDC fuse protected outputs with a total of 10A continuous supply current. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Altronix eFlow4NB UL Listed Sub-Assembly power supply/charger converts 120VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.